Do I still need to turn on the fog lights when AUTO is on?

1 Answers
VanHeidi
07/30/25 1:31am
You still need to turn on the fog lights when AUTO is on, because the fog lights require a separate switch to be activated, provided that the small lights are already turned on. Conditions for turning on fog lights: According to traffic regulations, when visibility is between 100-200 meters, you must turn on the fog lights, low beams, width markers, and taillights, and the speed must not exceed 60 km/h, maintaining a distance of at least 100 meters from the vehicle ahead. When visibility is between 50-100 meters, you should turn on the fog lights, low beams, width markers, and taillights, with the speed not exceeding 40 km/h and maintaining a distance of at least 50 meters from the vehicle ahead. AUTO, also known as automatic headlights, is a light-sensitive control system installed by car manufacturers for user convenience. When the ambient light dims while driving, the headlights will automatically turn on, and they will turn off when the light brightens. The driver only needs to turn the light switch to the AUTO position, and the vehicle will automatically activate the high or low beams or turn them off based on the situation, which is very convenient for entering and exiting tunnels and garages.
Was this review help?
16
2
Share
More Forum Discussions

What to Do When Your Car Window is Smashed?

First, you should report the incident to the police. Generally, intersections and school zones have surveillance cameras. If the perpetrator is identified, you can seek compensation from them. If the perpetrator cannot be found, you can choose to file an insurance claim. According to the fee reform rules effective September 19, 2020, glass coverage has been incorporated into comprehensive auto insurance, so you can directly file a claim. If you did not purchase or renew your insurance after this date, you would need to have previously purchased separate glass coverage to file a claim.
4
3
Share

How to Adjust Mirrors for Parallel Parking?

After getting into the car, adjust the seat and backrest to maintain a normal driving posture, then begin adjusting the rearview mirrors. The rearview mirror adjustment buttons are located on the inner side of the front doors, allowing for adjustments in four directions: up, down, forward, and backward. For vertical adjustment, press it to the lowest position to clearly see the lines. When adjusting forward or backward, remember the standard is that the car body should occupy one-fourth of the mirror's area.
17
3
Share

Where to Get the Vehicle Inspection Sticker and What to Do If It Expires?

You can simply reapply at the relevant authorities. According to regulations, motor vehicle inspection agencies are required to upload exhaust emission test information to the traffic management department of the public security authority. If a vehicle has not undergone exhaust emission testing, the vehicle management department will not issue a safety technical inspection certificate, and the owner will be unable to proceed with the annual inspection.
12
1
Share

How to reset the tire pressure monitoring light on Changan Oushang X70A?

Firmly press the vehicle's brake pedal to prepare for turning on the power. Press the vehicle's one-touch start button. The dashboard lights up, indicating the power is on. Inflate all four tires to the standard pressure. Press and hold the tire pressure warning light reset button for 3 seconds.
18
3
Share

How to deal with a damaged wheel arch?

First, cut and remove the rusted and damaged area, then grind and polish it to eliminate as much rust as possible. Create a wheel arch of the same shape using sheet metal, then weld it back into place. Follow this with a series of processes including grinding, applying putty, polishing, and painting.
3
5
Share

What to Do When the Vehicle Owner Passes Away and the Vehicle License Is Lost?

Motor vehicles should be processed at the vehicle management office branch corresponding to the residential address recorded in the identity document of the vehicle owner. To replace (or renew) the "Motor Vehicle License", the process will be completed within one working day from the date of acceptance. Required documents include the application form for replacement or renewal of motor vehicle license plates and certificates, as well as the identity document and its copy of the vehicle owner. The vehicle owner should submit the license plates that are not entirely damaged or lost. If the procedure is handled by an agent, the agent's identity document and its copy must also be provided.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.