Do I still need to stick the car insurance on the front of the vehicle?

1 Answers
DeFrank
07/29/25 10:58pm
It is not necessary to display it on the front of the vehicle. Currently, most regions across the country have implemented electronic insurance policies, which hold the same legal validity as paper policies. Functions of electronic insurance policies: If the compulsory traffic insurance label for vehicles in 2021 is an electronic policy, there is no need to display the compulsory insurance label in pilot areas. Electronic policies have the same effect as paper policies and labels. If stopped by traffic police, the owner only needs to present the electronic policy to be allowed to proceed without facing fines or vehicle towing. Usage of electronic insurance policies: Most regions nationwide have already adopted the electronic policy policy. For electronic policies purchased by vehicle owners, traffic police can simply check online to verify insurance coverage, eliminating the need to affix insurance labels on the windshield.
Was this review help?
13
3
Share
More Forum Discussions

Why Does the Ignition Coil Fail?

The reasons for ignition coil failure: 1. Excessive generator output, causing overload on the ignition coil; 2. Excessive spark plug gap; 3. Poor fuel quality; 4. Incorrect cylinder compression ratio; 5. Program malfunction in the ECU; 6. Unstable power supply voltage; 7. Abnormal resistance in high-voltage wires; 8. Short circuit in the secondary circuit; 9. Excessive primary current from the ignition controller leading to overheating of the ignition coil; 10. High temperature effects causing issues with high-voltage waves and poor operation; 11. Malfunctioning ignition unit. The core components of the ignition system are the ignition coil and the switching device. Increasing the energy of the ignition coil enables the spark plug to generate sparks with sufficient energy, which is a fundamental requirement for the ignition system to meet the operational demands of modern engines.
14
0
Share

Do You Need to Wash the Car Before Applying Window Tint?

It is necessary to wash the car before applying window tint. If the car body is not clean, bumps will appear after the film is applied, which not only affects the appearance of the car but also makes the raised areas prone to damage. Precautions for car window tinting: 1. After applying the film, avoid rolling the windows up or down for three days, and do not wash the car during this period; 2. For vehicles with a sunroof, avoid opening the sunroof while driving, especially at high speeds, within three days; 3. If bubbles appear at the edges of the film, they should be repaired at the installation site within 24 hours. Delaying beyond this time may cause the adhesive around the bubbles to dry completely, making the film edges immovable and resulting in creases during repair; 4. Do not use highly adhesive labels directly on the film for one month after application to prevent partial detachment of the film from the glass; 5. Be aware of the vehicle inspection policies in various cities when applying car window tint.
18
3
Share

How to turn off the turn signal?

To turn off the turn signal: The driver only needs to gently tap the lever, and the turn signal will flash three times and then automatically turn off. The turn signal switch is usually installed on the left side of the steering wheel. The operation method is to push it up to indicate a right turn and push it down to indicate a left turn. Nowadays, many cars have a quick-tap function on the hazard light switch that triggers three flashes, allowing the driver to avoid the hassle of manually turning off the turn signal when changing lanes or overtaking. The turn signal is the primary device for indicating a car's dynamic information, installed at the front and rear of the vehicle. It is activated when the car turns, providing safety for driving. For everyone's safety, please use the turn signal as required to inform others of the car's movement in advance, enabling them to make correct judgments.
9
4
Share

What model of fog lights is used for modifying the Volkswagen New Lavida?

For modifying the fog lights of the Volkswagen New Lavida, the H11 model is used, while the high and low beam lights are models H1 and H7. The installation position of fog lights must be below the bumper and at the lowest point of the body closest to the ground to ensure their effectiveness. If installed too high, the light cannot penetrate rain and fog to illuminate the road surface, which can easily lead to danger. The dimensions of the Volkswagen New Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The vehicle is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 110kW and a maximum torque of 250Nm.
6
5
Share

What are the reasons for the wiper not cleaning properly when wiping?

The reasons for the wiper not cleaning properly when wiping: 1. The rubber strip of the wiper blade is aged or hardened; 2. The windshield is too dirty. Situations requiring wiper blade replacement: 1. If there are cracks, fissures, aging, rust, deformation, attachments, discoloration, etc., it is recommended to replace the wiper blade promptly; 2. If the rubber strip has detached from the frame, causing slapping against the windshield with each wipe, producing abnormal sounds like jumping or shaking, it is advised to replace the wiper blade; 3. If each wipe leaves scratches on either side or the middle of the glass, it is recommended to replace the wiper blade. There are two types of wiper blades: one is the beam blade (without frame), and the other is the conventional blade (with frame). Currently, the beam blade is more commonly used because, without a frame, it fits better against the windshield, resulting in cleaner wiping.
10
2
Share

Is it necessary to warm up the car in summer?

It is not necessary to warm up the car in summer. Idling to warm up the car is useless for fuel-injected engines, but it was useful for carburetor engines. However, carburetor engines have long been phased out, and no cars use carburetor engines anymore, so there is no need to warm up the car. Idling to warm up the car not only fails to quickly raise the engine temperature but also increases carbon deposits inside the engine. The correct way to drive is to start moving after starting the engine, just avoid driving at excessively high RPMs initially to protect the engine and reduce wear. Once the engine's coolant temperature reaches normal levels, you can then increase the RPMs.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.