Do I still need to obtain the inspection exemption label for motor vehicles exempt from inspection in 2021?

1 Answers
AndersonDella
07/28/25 10:58pm
2021 motor vehicles exempt from inspection still require obtaining the label. The specific details are as follows: Exemption from inspection: This does not mean no inspection is required. Exemption from inspection refers to vehicles registered within 6 years that meet the standards, exempting them from on-site inspection during the biennial periodic inspection. Obtaining the label: Vehicles exempt from inspection still need to undergo annual review to obtain the exemption label. You can apply for an electronic label via the Traffic Management 12123 app or obtain a paper label at the vehicle management office. Information about motor vehicles is as follows: Motor vehicle: The English name is MV, meaning 'motor vehicle'. It refers to wheeled vehicles driven or towed by power devices, used for passenger transport, goods transportation, or specialized operations on roads, including some recreational facilities (such as electric balance bikes, electric scooters, electric bicycles, etc.). Classification: Can be categorized into cars and car trains, motorcycles and mopeds, tractor transport units, wheeled special-purpose machinery vehicles, and electric vehicles, etc.
Was this review help?
5
5
Share
More Forum Discussions

How to Adjust Car Headlights Between High and Low Beam?

The methods for adjusting low beam and high beam are as follows: To switch from high beam to low beam, push the rotating lever towards the driver's direction. There are light adjustment devices above the steering wheel. Push the switch towards the engine compartment position to keep the high beam on continuously; pull it back one gear to turn off the high beam and restore the low beam; push it one more gear towards the driver's direction for temporary high beam flashing, and the switch will automatically return to the low beam position after releasing it. Here is a partial introduction to car high and low beams: Do not misuse car lights: Car lights include low beam, high beam, width indicator lights, headlights, fog lights, etc. Each light has a different purpose, and their use requires careful consideration—neither misuse nor neglect is acceptable. Nighttime light usage: Misusing lights or failing to turn on appropriate lights during nighttime driving can cause inconvenience to both yourself and others, and may even lead to safety hazards, increasing the likelihood of accidents.
8
4
Share

Where to Apply for Temporary License Plates?

It takes some time to process the official license plates for a vehicle. During this period, if the driver wants to drive on the road, they can apply for temporary license plates at the vehicle management office. Below is the relevant information for applying for temporary license plates: Materials Required: Original and photocopy of the vehicle qualification certificate (import certificate for imported vehicles); Original and photocopy of the third copy of compulsory traffic insurance; Original and photocopy of the owner's identity proof; If applying through an agent, original and photocopy of the agent's ID card are required. Types of Temporary License Plates: Temporary license plates within administrative jurisdiction, temporary license plates across administrative jurisdictions, temporary license plates for test vehicles, and temporary license plates for special vehicles.
18
1
Share

Is a Motor Vehicle Driver's License for Motorcycles or Cars?

Motorcycle driver's license is also called motor vehicle driver's license, but it cannot be used to drive cars. The specific details are as follows: Definition of Motor Vehicle Driver's License. A motor vehicle driver's license refers to a legal certificate issued by the administrative department after a person who is legally allowed to learn to drive a motor vehicle has studied, mastered the knowledge of traffic regulations and driving skills, and passed the examination. It permits the holder to drive a certain type of motor vehicle. Differences between Motorcycle and Car Driver's Licenses. Car driver's licenses are generally C1, while motorcycle licenses are E. They cannot be obtained simultaneously; there must be a one-year interval between applications. Both motorcycle and car driver's licenses are managed by the vehicle management office. If there are unpaid fines for motorcycle traffic violations, the vehicle management department will not approve the application for a car driver's license.
1
5
Share

What is the fuel consumption of the 7th generation Elantra?

The fuel consumption of the 7th generation Elantra is 5.3 liters per 100 kilometers. The following are the factors affecting fuel consumption and methods to reduce it: Factors affecting fuel consumption: The vehicle's own weight, the car's design, and the thermal efficiency of the engine are three key automotive technologies related to fuel consumption. Incorrect driving habits can multiply fuel consumption; road conditions determine the car's fuel consumption; maintaining good vehicle condition is fundamental to saving fuel. Methods to reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid stomping on the accelerator, as this can multiply fuel consumption. Gently pressing the accelerator when starting not only shortens the engine's warm-up time but also effectively improves fuel utilization, thereby achieving fuel-saving effects.
18
1
Share

Are Scratch Repair Products for Car Paint Really Effective?

Scratch repair products can only remove very minor and shallow scratches; deeper scratches still require polishing to be fixed. In fact, the effect of car scratch repair fluid is similar to toothpaste—it works decently for minor scratches on the car's paint surface. However, for deeper scratches, car scratch repair fluid is generally ineffective. Here is an introduction to car paint layers: Electrophoretic Layer: During car manufacturing, the entire body is immersed in an electrophoretic bath. The electrophoretic layer adheres directly to the metal body and serves to prevent rust and enhance the bonding capability of the paint. This layer is crucial for rust protection. Primer Layer: The primer layer acts as an intermediary. On one hand, it provides better adhesion for the next layer of paint, and on the other, it protects the electrophoretic layer, improving rust resistance. Additionally, the primer layer plays an essential role in the smoothness and impact resistance of the paint. Base Coat: The base coat is the colored layer—the vibrant colors we see on cars come from this layer. Many manufacturers now use metallic paint for the base coat. Clear Coat: The clear coat is the outermost layer of paint, giving the car a glossy finish and protecting the base coat.
10
4
Share

How to Determine the Condition of a Catalytic Converter?

Visual Inspection. Examine the exterior of the catalytic converter for any damage or discoloration. If there are scratches, cracks, etc., it is likely that the catalytic converter has been damaged. If there are noticeable gray spots in the center of the catalytic converter's protective cover, severe discoloration spots, or purple marks on the shell, it may indicate that the catalytic converter has experienced overheating issues. Check the Engine Exhaust. Place your hand near the tailpipe exhaust outlet to feel the exhaust flow and check if the catalytic converter is clogged or if there are issues with poor exhaust flow. Another method is to open the air filter, remove the filter element, and observe if there is exhaust backflow during rapid acceleration, which indicates poor exhaust flow. To assess the condition of the TWC (Three-Way Catalyst), check if the secondary air injection pump is functioning properly. Use an Infrared Thermometer. Compare the temperature difference between the front and back of the TWC using an infrared thermometer. If the temperature difference between the inlet and outlet of the catalytic converter is less than 10°C, the TWC is likely damaged. Cleaning the Catalytic Converter: The cleaning method for the catalytic converter involves using an intravenous drip. This method connects a plastic hose to the engine's vacuum solenoid valve and relies on the air pressure in the hollow tube to draw the cleaning agent from the infusion bottle into the engine. As the cleaning agent exits through the exhaust pipe, it cleans the catalytic converter. Lifespan of the Catalytic Converter: The typical lifespan of a catalytic converter is between 80,000 to 100,000 kilometers. The actual lifespan depends on the vehicle's usage conditions, as well as the quality of the fuel used and the driving environment.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.