Do I need to use turn signals when reversing?

1 Answers
OKinsley
07/30/25 9:01am
When reversing with a turn, turn signals are required; for straight-line reversing, turn signals are not needed. According to Article 57 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicles must use turn signals as follows: 1. The left turn signal should be activated in advance when intending to turn left, change lanes to the left, prepare to overtake, leave a parking spot, or make a U-turn. 2. The right turn signal should be activated in advance when intending to turn right, change lanes to the right, return to the original lane after overtaking, or park by the roadside.
Was this review help?
18
2
Share
More Forum Discussions

How to turn on the ambient lights in Cadillac XT4?

Cadillac XT4's ambient lights do not have a switch; they are voice-activated. The ambient lights are located in the front footwells, door edges, center control knob, and dashboard extension. Taking the 2021 Cadillac XT4 as an example, it is a compact SUV with body dimensions of length 4600mm, width 1881mm, height 1627mm, and a wheelbase of 2779mm. The 2021 Cadillac XT4 features a MacPherson strut front suspension and a five-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237ps, maximum power of 174kw, and maximum torque of 350nm, paired with a 9-speed automatic transmission.
13
1
Share

What Happens If the Handbrake Is Not Fully Released?

The effects of not fully releasing the handbrake include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake disc and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake caliper fluid, leading to brake failure. The correct method to apply the handbrake is: 1. Press the handbrake button before pulling it; 2. Apply gentle force when pulling the handbrake; 3. Pull the handbrake up to about 70%—pulling it to the maximum height will shorten the lifespan of the handbrake cable. The function of the handbrake is to provide braking when parking on flat ground or slopes, preventing the vehicle from moving unintentionally and avoiding traffic accidents.
13
3
Share

What are the reasons for abnormal noise when turning the steering wheel of the Mingtu?

The reasons for abnormal noise when turning the steering wheel of the Mingtu are: 1. Poor lubrication of the shock absorber plane bearing; 2. Aging of the balance rod rubber sleeve. Taking the 2021 Mingtu as an example, it is a mid-size car with body dimensions of: length 4780mm, width 1815mm, height 1460mm, wheelbase of 2770mm, and a body weight of 1357kg. The 2021 Mingtu features a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 170PS, maximum torque of 253Nm, and maximum power of 125kW, paired with a 7-speed dual-clutch transmission.
12
4
Share

How long does it take to charge a car battery once?

It takes about 10 hours to charge a car battery once. The charging method is: 1. Connect the positive terminal of the charger to the positive terminal of the car battery, and the negative terminal of the charger to the negative terminal of the battery; 2. Press the charging button to start charging. Precautions for charging are: 1. When the battery voltage is 10% lower than the rated voltage, it will cause the battery to lose power; 2. Avoid water entering the battery during charging; 3. The battery should be charged directly without removing it, otherwise data may be lost. The functions of the battery are: 1. Provide strong current to the starter when starting the engine; 2. Assist the generator in supplying power to electrical equipment when the generator is overloaded; 3. Supply power to electrical equipment when the engine is idling; 4. Protect car electrical appliances.
11
2
Share

What are the diesel engine oil grades?

Diesel engine oil grades are: ca, cb, cc, cd, ce, cf, cf-4, cg-4, ch-4, ci-4, cj-4, etc. The functions of engine oil are: 1. To alleviate friction and high temperature; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and parts; 4. To buffer the pressure rise at the engine cylinder port; 5. To flush away dirt generated on the working surfaces of parts. The maintenance items for diesel engines include: 1. Regularly changing the engine oil and oil filter; 2. Keeping the crankcase well-ventilated; 3. Regularly cleaning the crankcase; 4. Regularly cleaning the fuel system; 5. Regularly maintaining the radiator; 6. Maintaining and cleaning the fuel system.
20
1
Share

How to Identify Tire Wear?

Identifying tire wear involves observing the thickness from the top to the bottom of the tread grooves. New tires typically have a thickness of about 8mm, and when the wear reaches approximately 1.6mm, it's time to replace the tire. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to achieve vehicle operation; 2. Supporting vehicle loads; 3. Reducing and absorbing vibrations and impacts during driving. Methods to reduce tire wear include: 1. Regularly removing stones stuck in tire treads; 2. Minimizing exposure to direct sunlight; 3. Timely checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Adopting careful driving habits, choosing smooth road surfaces, avoiding objects that can puncture or scratch tires, and steering clear of chemical spills that may corrode tires.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.