Do I need to switch back to low beam before temporary parking after using high beam?

1 Answers
Corey
07/29/25 10:12pm
After using high beam, you need to switch back to low beam before temporary parking, then turn on the width light and hazard lights. Precautions for temporary parking: You can park in the far right lane. A yellow line drawn on the right side of the lane is a no-parking marking for motor vehicles, and parking there is considered illegal. Precautions for temporary parking: Even if there is a temporary parking sign in the motorway, parking is strictly prohibited within the yellow grid lines drawn on both sides of the lane, otherwise it will be considered illegal parking; bus stops, emergency stations, gas stations, fire hydrants or in front of fire stations and within 30 meters of the above locations, except for the use of the above facilities, parking is not allowed; intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels and within 50 meters of the above locations, parking is not allowed; when there is no distinction between the sidewalk and the roadway, park along the right side of the road, and when there is a sidewalk, park along the right side of the road. A solid yellow line is a prohibition line, serving as a warning not to cross. On roadsides with solid yellow lines, parking is strictly prohibited, including long-term and temporary parking.
Was this review help?
14
3
Share
More Forum Discussions

How to Choose Between Volkswagen CC and Passat?

Passat comes with a displacement of 1.4T or 2.0T. Volkswagen CC has a displacement of 2.0T. Passat adopts front-engine, front-wheel drive. Volkswagen CC also uses front-engine, front-wheel drive. Passat leans towards a family sedan. Volkswagen CC leans towards a sports car.
5
4
Share

How to Activate the Defogging Function in Volkswagen Lavida?

The defogging buttons include the front windshield and rear windshield. Press the corresponding button to activate the windshield defogging function. After using the button to turn on the car's defogging function, you can continue to observe whether the effect of the defogging function meets the expected level.
17
2
Share

How to Drive an Automatic Transmission Car in Uphill Traffic Jams

You can press the O/D button to force the car to stay in a low gear without upshifting. For automatic transmission cars, the gear should be placed in the P position. You can utilize engine braking. At the same time, avoid frequently stepping on the brakes. Pay attention to preventing the car from rolling back and maintain braking.
6
5
Share

How to Transfer Ownership of a Used Car?

You need to prepare the original and photocopies of the buyer's and seller's ID cards, the original vehicle purchase invoice or the last transfer invoice and its photocopy, and other required documents. When all the documents are ready, you can submit the application to the relevant department and complete the procedures.
12
3
Share

What to Do When a Car Collision Occurs?

First, try to take photos of the scene and then move to a place that does not obstruct traffic to avoid causing congestion. Traffic police will determine accident liability according to standard procedures, and the insurance company will assess the vehicle damage. After the vehicle is repaired or treatment is completed, compensation will be handled based on the liability determined by the traffic police.
1
2
Share

What is the fuel consumption of the Luxgen 7 SUV?

The Luxgen 7 SUV has a fuel tank capacity of 75 liters, which is the officially announced data. Owners who have purchased the Luxgen 7 SUV can also check this information on the vehicle's configuration sheet. The Luxgen 7 SUV uses 92-octane gasoline, with a fuel consumption of 8.9 to 12.1L per 100 kilometers. A full tank can cover a distance of 620 to 843 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow from the tank's safety space. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.