Do I Need to Repurchase Insurance for a Used Car Transfer?

1 Answers
VonAshlyn
07/29/25 9:40am
If the original car insurance has not yet expired, you can transfer the insurance. If you do not want the original insurance, you can also switch to a new one. Here are some considerations when buying a used car: Pay attention to the exterior: Some used cars have been in accidents. To increase the value of the car, dealers may refurbish it, repaint it, and make it look newer. Therefore, when purchasing a car, carefully inspect the exterior, check all corners and parts of the car for signs of repainting, and look for wear on the tires, headlights, and bumpers. Pay attention to the chassis and frame: After a car has been in an accident, even if the exterior is well repaired, the frame and chassis are difficult to restore. If you notice any deformation or bending, be cautious, as the car may have been in an accident.
Was this review help?
14
4
Share
More Forum Discussions

How to Tell if the Car Body is Aligned Properly?

There are four methods to determine if the car body is properly aligned: 1. Stand outside the car and observe the body alignment using nearby reference objects. 2. Use the windshield wipers as an indicator by comparing them with road markings. 3. Maintain a fixed distance or angle while driving; any deviation indicates misalignment. Ensure proper sitting posture in the driver's seat and focus your gaze far ahead. 4. Avoid focusing solely on the car's body lines. Instead, look into the distance at traffic lights, the rear of the vehicle ahead, or lane markings to assess if the front of the car is properly aligned.
12
2
Share

What kind of car is the Mazda3 Axela?

The Mazda3 Axela is positioned as a compact sedan. The dimensions of this car are 4662mm in length, 1797mm in width, and 1445mm in height, with a wheelbase of 2726mm. It has a fuel tank capacity of 50 liters and features a 4-door, 5-seat sedan body structure with front-wheel drive. In terms of power, the Mazda3 Axela is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 86kW and a maximum torque of 148Nm, paired with a 6-speed manual transmission. For suspension, the car uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
4
3
Share

Why Does the Motorcycle Fuel Tank Make Noise?

Motorcycle fuel tank noise may occur when the fuel level reaches a certain height, causing the float of the fuel level sensor to hit the tank due to bumps during riding. Definition of the fuel tank: It must have sufficient capacity. To maintain fuel cleanliness, the tank should have a sealed cover with an air filter installed. The bottom of the tank should be at least 150mm above the ground, and adequate attention should be paid to the anti-corrosion treatment of the inner surface. Materials of motorcycle fuel tanks: Stainless steel is commonly used for motorcycle fuel tanks, with higher-quality tanks opting for cold-rolled stainless steel. Besides stainless steel, other materials such as specially treated rust-resistant iron, hot-rolled iron, and engineering plastics are also used for motorcycle fuel tanks.
4
0
Share

Which Consumes More Fuel: Business Vehicles or Sedans?

Sedans with the same displacement consume less fuel than business vehicles. Factors affecting fuel consumption: The heavier the vehicle, the more power is required for acceleration and climbing, leading to higher fuel consumption. Aerodynamic drag: Business vehicles generally have a higher drag coefficient than sedans, and a higher drag coefficient results in increased fuel consumption. Transmission gear ratios: Business vehicles with the same engine typically have lower gear ratios than sedans. At the same speed, the engine RPM of an MPV is higher than that of a sedan, resulting in higher fuel consumption. Tips for saving fuel: Using high-quality fuel not only reduces fuel consumption but also helps extend the engine's lifespan. Regularly cleaning engine carbon deposits ensures more complete fuel combustion. Maintain steady driving and keep the engine RPM within a relatively low range.
11
4
Share

How to Set Volkswagen Seat Memory?

Volkswagen seat memory setting method: Turn on the ignition switch (do not engage gear), adjust the seat and exterior mirrors to the desired position, press and hold the SET button for more than 1 second, then press one of the 3 memory buttons within 10 seconds. A prompt tone will sound when the memory is successfully stored. Taking the 2021 Volkswagen Lavida as an example, this car measures 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine delivering a maximum power of 110kW and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
8
1
Share

What are the exterior dimensions of the Accord?

The exterior dimensions of the Accord are 4906mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. It is positioned as a compact sedan. The front suspension of this car is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. The Accord is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum torque of 260Nm and a maximum power of 143kW, paired with a continuously variable transmission. In terms of appearance, the car features smooth body lines, blending fashionable dynamism and elegant demeanor. The rear design is eye-catching, adopting the LED high-mounted brake light commonly used in luxury models and the elegant triangular combination taillights, which are simple and lively, creating an impression of grandeur and stability together with the unique wide license plate holder.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.