Do I Need to Replace the Car Lock If the Key Is Lost?

1 Answers
VanLuke
07/30/25 10:47am
If the car key is lost, it is necessary to replace the lock. You can go to a 4S shop to replace the lock or get a new key made, and delete the data of the lost key. After deletion, the vehicle cannot be started. The specific details are as follows: 1. If it is a mechanical key, purely mechanical car keys are rare nowadays. Such keys are as simple as different door lock keys, with one key able to open the car door, trunk, and start the engine. It is best to replace all the locks on the car. 2. If it is an electronic anti-theft key, an electronic anti-theft key adds a remote control to the mechanical key. The remote control is used to open the car door or windows. If this type of key is lost, you can use the spare key to make a copy and match a new key. Although the lost key's remote control cannot open the car door, it can still forcibly open the car door, trunk, or start the engine. It is recommended to replace all the locks on the car.
Was this review help?
15
1
Share
More Forum Discussions

How many years does a sedan need to go for inspection?

Sedans need to go for an inspection line in the sixth year. The six-year exemption from inspection only applies to the first five years, and the sixth year requires an on-site inspection. Annual inspection is something every car owner will encounter, and it is conducted to ensure that all indicators of the vehicle meet the standards, thereby improving safety and reducing the likelihood of accidents. According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law," which came into effect on July 1, 2018, motor vehicles must undergo safety technical inspections according to the following schedule from the date of registration: 1. For commercial passenger vehicles, an annual inspection is required every year within the first 5 years, and every 6 months after exceeding 5 years; 2. For trucks and large and medium-sized non-commercial vehicles, an annual inspection is required every year within the first 10 years, and every 6 months after exceeding 10 years; 3. For small and micro non-commercial passenger vehicles, an inspection is required every 2 years within the first 6 years, every year after exceeding 6 years, and every 6 months after exceeding 15 years; 4. For motorcycles, an inspection is required every 2 years within the first 4 years, and every year after exceeding 4 years.
7
1
Share

What are the benefits of 98 octane gasoline?

The following are the benefits of 98 octane gasoline: 1. Performance and environmental aspects: Higher anti-knock performance and power, reduced harmful substances in gasoline and exhaust pollution. 2. Economic aspects: Enables pursuit of higher engine power with smaller displacement, improving both power and fuel economy. The following is related information about 98 octane gasoline: 1. Introduction: 98 octane gasoline is gasoline whose octane rating is equivalent to a mixture of 98% isooctane and 2% n-heptane. Engines with high compression ratios should use high-octane gasoline. If a high-compression engine uses low-octane gasoline, it can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Compared to other grades of gasoline, 98 octane gasoline has strong anti-knock properties and high combustion value, providing more powerful performance. However, due to its high grade and price, it is mostly used by luxury cars and is often referred to as 'premium gasoline.' 2. Standards: The country has strict standards for automotive gasoline. It not only requires gasoline to have a certain octane rating (commonly known as the gasoline grade) but also imposes strict regulations on the content of various chemical components in gasoline. If the olefin content is too high, the gasoline cannot burn completely, producing a gummy substance that accumulates in the intake manifold and valve guide areas. When the engine is at normal operating temperature, there are no abnormal phenomena; however, when the engine is shut off and cooled for a period, these deposits can stick the valve in the valve guide. Starting the engine at this time can cause valve sticking.
3
3
Share

Why can't I find my newly replaced driver's license on 12123?

There are two reasons why a newly replaced driver's license cannot be found on 12123: 1. The data from the traffic police department's system has not been updated to the 12123 software system, and you need to wait for the system data to be synchronized before you can view it. 2. It may be that the correct issuance address of the driver's license was not selected during registration, which can cause some data to not be displayed or delayed. You need to select the driver's license transfer option and transfer it to the issuance address of the driver's license for it to be displayed. Here is additional information: According to Article 78 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 139), if a driver fails to participate in the review for three consecutive scoring cycles, the vehicle management office will revoke the driving qualification for the highest permitted vehicle type and notify the driver to complete the downgrade and replacement procedures within 30 days. If the downgrade and replacement procedures are not completed within the specified time, the vehicle management office will announce the revocation of the driving qualification for the permitted vehicle type as invalid.
20
1
Share

What Causes the Trailer ABS Light to Illuminate?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect vehicle speed signals. This prevents the ABS computer from determining the speed and wheel slip rate, thus failing to issue appropriate commands for brake adjustment. Solution: Clean the contaminants from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay lead to signal issues, causing system failure. Solution: Inspect the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains illuminated after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, poor contact in the ABS hydraulic valve body wiring connector, or ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connector and replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between rear and front wheel speed signals during high-speed driving. This can also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward. Then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advisable to avoid continued driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
7
2
Share

Detailed Explanation of the 16 Items in the A1 Subject 2 Driving Test?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the A1 Subject 2 driving test includes 16 items: reverse parking into a garage, hill start and stop, parallel parking, mountain road simulation, right-angle turns, rain and fog weather simulation, narrow gate, bumpy road, single-plank bridge, narrow road U-turn, driving over "big biscuits," curve driving, highway simulation test, highway emergency handling, highway tire blowout, and tunnel simulation driving. The specific details are as follows: Reverse Parking into a Garage: From the starting point, reverse into Garage B and stop correctly. Then, move the vehicle twice forward and twice backward to Garage A and stop correctly. Proceed forward to exit Garage B to the control line, reverse into Garage A and stop correctly, then return to the starting point. The vehicle must not stop during the process, and the total time must not exceed 8 minutes. Parallel Parking: After parking the vehicle on the right side in front of the garage, reverse into the garage in one go without stopping. The wheels must not touch or cross the lane or garage boundary lines. Single-Plank Bridge: During the test, the vehicle must not stop, and the wheels must not fall off the bridge. Narrow Road U-turn: The vehicle must park on the right side of the U-turn section and complete the U-turn in no more than three forward and two backward movements. The test time must not exceed 5 minutes. Driving Over Continuous Obstacles: The vehicle must use second gear or higher to pass over the "big biscuits" without touching, rubbing, or running over them. The wheels must not cross the road edges, and the vehicle must not stop during the process. Right-Angle Turns: The vehicle must follow the designated route and complete a right-angle turn (left or right) in one go without stopping or touching the lane boundary lines. Hill Start and Stop: The vehicle must stop accurately and start smoothly without rolling back. The starting time must not exceed 30 seconds. Highway Simulation: After entering the highway via the ramp, turn on the left turn signal, check for oncoming traffic, and accelerate to the minimum speed limit before merging into the lane. Turn off the turn signal after merging. When changing lanes, turn on the turn signal for the intended lane, check for traffic, and change lanes safely. When exiting the highway, adjust speed and lane position in advance based on exit signs. Curve Driving (S-Turn): Also known as the S-curve, this is one of the easier items in Subject 2. The test road is 3.5 meters wide with a radius of 7.5 meters. The vehicle must not touch the road edges, and steering must be smooth. Emergency Handling Simulation: During normal driving, one of the following emergencies will be randomly simulated using voice or lights: If an obstacle suddenly appears, brake immediately, stop quickly, and turn on the hazard lights. In case of a tire blowout or other vehicle malfunction on the highway, slow down safely, check for following traffic, stop smoothly in the emergency lane, turn on hazard lights, instruct passengers to move behind the guardrail, place warning signs correctly, and simulate calling for help. Tunnel Simulation: Before entering the tunnel, observe the traffic signs and follow the instructions. Slow down, turn on headlights, and honk when entering the tunnel. Honk again and turn off headlights when exiting. Do not honk in no-honking zones. Rain/Fog Simulation: Slow down and adjust wiper speed based on rain intensity. In fog, turn on fog lights, position lights, headlights, and hazard lights. Wet Road Simulation: Slow down before entering the wet road section, then use low gear to drive steadily through without stopping. Mountain Road Simulation: Slow down before sharp turns, drive on the right side, honk before entering the turn, and avoid crossing into the opposite lane. Bumpy Road: Slow down before the bumpy road section and pass through slowly without stopping. Narrow Gate: The vehicle must pass through three gates at a speed of at least 10 km/h without touching the hanging poles.
9
5
Share

What are the exterior dimensions of the Avancier?

The Avancier measures 4816mm in length, 1942mm in width, 1669mm in height, with a wheelbase of 2820mm. The Avancier is a large luxury SUV launched by GAC Honda, featuring a spacious and luxurious interior space with high-end value that surpasses its peers. The Avancier is equipped with a powertrain consisting of a 2.0T turbocharged engine and a 9AT transmission, delivering a maximum power of 200kW and a maximum torque of 370Nm, providing strong high-power output while achieving excellent fuel economy. Additionally, the Avancier features an ANC active noise cancellation system, which, through noise reduction designs for the engine, body, and even the wheels, achieves a quiet performance comparable to luxury vehicles.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.