Do I need to replace a pair of tires after a blowout at 20,000 kilometers?

1 Answers
ONorah
07/30/25 5:07am
It is recommended to replace a pair. The lifespan of tires is 4 years or 50,000-60,000 kilometers. Below is an introduction to the functions of tires: 1. Weight: Supports the entire weight of the vehicle and bears the load of the car. 2. Transmission: Transmits traction and braking torque, ensuring the adhesion between the wheels and the road surface. 3. Cushioning: Reduces and absorbs vibrations and impact forces during driving, preventing severe vibrations and premature damage to automotive components. 4. Adaptation: Adapts to the high-speed performance of the vehicle and reduces driving noise, ensuring driving safety, handling stability, comfort, and fuel efficiency.
Was this review help?
7
4
Share
More Forum Discussions

Why is there water leakage under the car steering wheel?

The cause is a leak due to damage to the air conditioning condensate pipe. Here is relevant information about the car steering wheel: 1. Definition: The wheel-shaped device used to control the direction of the car, which converts the force applied by the driver to the edge of the steering wheel into torque and transmits it to the steering shaft. 2. Grip method: If the steering wheel is viewed as a clock face, the correct hand position is left hand between 9 and 10 o'clock, and right hand between 3 and 4 o'clock. In the event of a collision, this posture is more conducive to supporting the body. 3. Material: The frame is generally made of zinc alloy or aluminum alloy. Some manufacturers are experimenting with cheaper and lighter magnesium alloys. The frame is produced by die-casting. A small number of manufacturers still use steel sheet metal for the frame, which has a complex structure.
20
5
Share

Is the BMW X3 rear seat crowded for three people?

It depends on the actual physical conditions of the passengers. If their weight and height are within a certain range, three people can sit without feeling crowded. Here is some relevant information about the BMW X3: 1. Body dimensions: The BMW X3 measures 4717mm in length, 1891mm in width, and 1689mm in height, with a wheelbase of 2864mm. 2. Powertrain: It is equipped with a 2.0TL4 engine featuring turbocharging, delivering a maximum horsepower of 184ps and a maximum torque of 290nm. The transmission is an 8-speed automatic manual, with a top speed of 210km/h. 3. Configuration: The BMW X3 features front-engine four-wheel drive, with a front suspension type of double-joint spring strut and a rear suspension type of multi-link independent suspension. The steering assistance type is electric power, and the body structure is of a load-bearing type.
20
4
Share

What does BMW x-drive mean?

BMW x-drive is introduced as follows: 1. xDrive refers to BMW's intelligent all-wheel-drive system. This system can quickly adjust the torque distribution between the front and rear axles while driving, providing the driver with more stable driving performance. For example, if understeer occurs during driving where the front wheels are pulled outward in a curve, the intelligent all-wheel-drive system will reduce the torque allocated to the front axle and transfer the power to the rear axle. 2. Additionally, the intelligent all-wheel-drive system can work in conjunction with the dynamic stability system to detect wheel slip. When slip occurs, the xDrive's diaphragm clutch is locked by an electric motor, which then transmits appropriate power to the wheels with the best grip. Meanwhile, the slipping wheels are controlled by the braking system to ensure the vehicle's stability.
3
3
Share

What to do if the Nissan Teana key ID is incorrect?

You can go to a 4S dealership to have professional staff rematch the key. Here is some extended information about the Nissan Teana: 1. The Teana is a mid-size sedan under the Nissan brand, and this model enjoys good reputation and sales in China. 2. The new Teana has already been launched, featuring more youthful exterior and interior designs as well as stronger power. 3. The new Teana uses two types of engines: one is a 2.0-liter naturally aspirated engine, and the other is a 2.0-liter turbocharged engine. The 2.0-liter naturally aspirated engine delivers 159 horsepower and a maximum torque of 208 Nm, with a maximum power speed of 6000 rpm and a maximum torque speed of 4400 rpm. This engine is equipped with dual C-VTC continuous variable valve timing system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block.
17
2
Share

What Causes the Squeaking Sound When Steering in Reverse?

The reasons for abnormal noises when steering in reverse are as follows: Most hydraulic power steering pumps exhibit this phenomenon. When turning the steering wheel, the power steering fluid cannot circulate smoothly, resulting in this squeaking sound. It could also be the sound of friction between the combination switch housing and the steering wheel. Loosening the housing screws and adjusting them slightly may resolve the issue. Additional information: 1. A car power steering pump is a component that helps improve and stabilize vehicle performance. It primarily assists the driver in adjusting the car's direction. Currently, most cars are equipped with power steering pumps, mainly including the steering power pump and the brake vacuum power pump. 2. The electro-hydraulic power steering system overcomes the shortcomings of traditional hydraulic power steering systems. The hydraulic pump it uses is no longer directly driven by the engine belt but instead employs an electric pump. All its operating states are calculated by the electronic control unit based on signals such as the vehicle's speed and steering angle to achieve the most ideal condition.
18
2
Share

What are the regulations for using high beams on highways?

Highway high beam usage regulations are as follows: 1. Reasonableness: When driving at night, proper use of headlights not only illuminates the road ahead for yourself but also avoids affecting the safety of other drivers. 2. Separation: If there is a central barrier on the road, such as bushes or a median strip, using high beams will not affect oncoming traffic. However, it's important to note that the barrier must be continuous and opaque. For spaced barriers like trees, you should promptly switch to low beams. The maximum range of high beams is generally 120,000mm, and you should switch to low beams when the distance to oncoming traffic is 150,000mm. 2. Distance to the vehicle ahead: Highway speeds are typically around 100km/h, and under these conditions, a distance of at least 100,000mm should be maintained. Therefore, high beams can be used when the distance to the vehicle ahead exceeds 150,000mm. When the distance to the vehicle ahead decreases, you should promptly switch to low beams.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.