···
Log in / Register

Do I need to register with the DMV when changing car rims?

1 Answers
DelCarter
09/04/25 6:45am

Modifying rims is not allowed in principle, so changing rims also requires registration. Before modification, you can consult the DMV to understand the situation, otherwise it will not pass the annual inspection and you will be ordered to restore the original condition. Extended information: According to the "Motor Vehicle Registration Regulations": If you change the body color, model, performance, purpose and structure of a licensed motor vehicle, or replace the frame, body or engine, the owner must apply to the DMV for modification registration. If you change rims of the same size, the annual inspection can basically pass, but the appearance should not change too much, unless the local policy is very strict.

Was this review help?
13
0
Share
More Forum Discussions

How to Reset the Buick Tire Pressure Light?

To reset the Buick tire pressure light, follow these steps: 1. Turn on the ignition; 2. Press the gage button on the right side of the driver information center; 3. Press the arrow setting button to clear the warning. Buick models include: Buick GL8, LaCrosse, Regal, Excelle, and Excelle GT. Taking the 2020 Regal Elite as an example, it is a mid-size 4-door 5-seater sedan with body dimensions of 4904mm in length, 1863mm in width, and 1461mm in height, with a wheelbase of 2829mm. It is equipped with a 1.5T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 124 kW and a maximum torque of 250 Nm.
4
5
Share

Is a DCT two-wheel drive an automatic transmission?

DCT and two-wheel drive refer to two different concepts. DCT is a type of dual-clutch transmission, which is a form of automatic transmission. Below are detailed explanations about dual-clutch transmissions: Introduction to Dual-Clutch Transmission: DCT and two-wheel drive represent two distinct meanings. DCT is a term for dual-clutch transmission, while two-wheel drive refers to the driving of two wheels. Because it has two sets of clutches, it is called a "dual-clutch transmission." Dual-clutch transmissions originated in motorsports and were first used in some racing cars in the 1980s. Principle of Dual-Clutch Transmission: By utilizing a design with dual multi-plate clutches, there is no power interruption during torque transmission, significantly reducing the vehicle's fuel consumption.
11
2
Share

Is a Temporary Residence Permit Required When Buying a Used Car in Another City?

Buying a used car in another city does not require a residence permit. The transaction itself does not need a temporary residence permit. However, if you want to register the car after purchase, a temporary residence permit or residence permit is required. Introduction to Used Cars: A used car refers to a motor vehicle that has been registered with the public security traffic management authorities, has not yet reached the national scrapping standards or is within its economic service life, and can still be used. Precautions for Buying and Selling Used Cars: When buying a used car, you should carefully observe the car's manufacturing date, actual mileage, whether it has been involved in any major accidents, and whether the previous owner maintained the vehicle properly, among other aspects.
14
4
Share

What is the method for replacing the rear brake pads of the Envision?

The method for replacing the rear brake pads of the Envision is as follows: 1. Open the engine compartment and check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install the new brake pads, tighten the guide bolts, and the replacement is complete. Taking the 2020 Envision as an example, it is a mid-size SUV with body dimensions of length 4694mm, width 1839mm, height 1686mm, a wheelbase of 2750mm, and a fuel tank capacity of 66L. The 2020 Envision is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm.
5
0
Share

How Many Chances Are There for the Safe and Civilized Driving Knowledge Test?

Both the road driving test and the safe and civilized driving knowledge test in Subject 3 are scored out of 100, with a passing score of 90. Subject 3 Test Items: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It evaluates the road driving skills and safe and civilized driving knowledge of motor vehicle drivers. The content of the road driving skills test varies depending on the type of vehicle being licensed. Difficulties in the Subject 3 Test: Mismatch between speed and gear: Errors such as high gear with low speed or low gear with high speed need to be avoided during the test. Deviation in straight-line driving: Many trainees intentionally slow down the vehicle due to concerns about not driving in a straight line, which is not advisable.
7
5
Share

What is the method for applying roof film?

The method for applying roof film is: 1. Clean the car body and keep it dry, then remove the roof trim strips; 2. Determine the area to be covered; 3. Apply while smoothing with tools and removing the backing paper simultaneously; 4. Peel off both the transparent transfer film and adhesive paper completely; 5. After application, repeatedly press and smooth before removing the transparent transfer film; 6. Use a utility knife to make a cut at doors and seams for inward wrapping. The purposes of car film are: 1. Reduce sunlight exposure and ensure safety; 2. Block UV rays, prevent skin damage, and reduce interior aging; 3. Protect privacy and maintain safe driving performance; 4. Compensate for air conditioning cooling capacity loss, lower cabin temperature, and reduce AC energy consumption; 5. Prevent secondary injuries from accidental glass breakage to passengers.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.