···
Log in / Register

Do I Need to Queue for a Number for the Subject One Exam?

5 Answers
McMary
07/24/25 2:12am

There is no need to queue for a number for the Subject One exam. Neither Subject One nor Subject Four has a fixed order. After receiving the exam materials, candidates should queue up at the exam room on their own, and those who queue first will take the exam first. Seats for the Subject One exam are randomly assigned. Once the exam room is full, candidates must wait for the next batch of exams. Only when a computer becomes available after the previous batch of candidates finishes will the invigilator allow the corresponding number of candidates to enter for the exam. Subject One Exam Process: Bring all documents and enter in advance: Candidates who have successfully scheduled the exam must bring their appointment information and ID card and arrive at the scheduled location before the scheduled time to prepare for the exam. Those without prior appointments are not allowed to enter. Wear a mask to enter the exam room: Before entering the exam room, candidates must wear a mask and present their "health code," cooperate with staff for temperature checks and relevant information registration. Candidates with fever or cough are not allowed to enter and will be treated as absent. Receive the form and queue for the exam: After receiving the exam materials, candidates should queue up at the exam room on their own, and those who queue first will take the exam first. Identity verification: After entering the exam room, candidates usually need to swipe their ID card for identity verification and remove their mask for facial recognition. After verification, the corresponding seat number will be displayed on the computer screen, and candidates can proceed to the designated seat for the exam. Exam answering: From the moment the ID card is swiped upon entry, the exam information will be displayed on the computer at the corresponding seat. Follow the prompts to record a video, and then begin answering questions. If a question is answered incorrectly, it will be immediately indicated, and a red mark will appear on the right side of the answer sheet. If 11 questions are answered incorrectly, candidates can apply for a retake at the identity verification point where they entered. Sign and leave: After the computer-based exam, the score will be displayed on the screen. Click "Confirm" to complete the exam, then sign at the invigilator's desk to validate the score. If the retake is failed, the exam will be terminated, and the candidate can schedule the next exam.

Was this review help?
9
0
Share
McHenry
08/10/25 9:22pm

Taking the written test for the driver's license definitely requires queuing for a number! I just passed it last week. After making an appointment at the driving school, I arrived at the test center on time. The place was packed with people, and I stood in a long queue waiting for my turn at the number dispenser. After showing my ID, I got a number tag. I waited for an hour before my number was called to enter the exam room. The process is quite simple, but make sure not to be late, otherwise the appointment will be canceled and you'll have to start over. The peak hours are around 7-8 AM when it's most crowded, so it's better to avoid that time to reduce waiting. The test mainly involves memorizing the question bank, and you need 90 points to pass. After finishing, I got a temporary score report, which made me feel much more at ease. Remember to wear loose clothing to stay comfortable during the long wait.

Was this review help?
7
5
Share
Expand All
Zoe
09/24/25 3:54am

As someone who has taken the driving test multiple times, I can tell you that for Subject 1, queuing to get a number is indeed common. Nowadays, online booking systems are used, but you still need to arrive early at the test center on the day to queue for identity verification and to get your number. The numbering system ensures fair sequencing and prevents queue jumping. It wasn't this formal in the past, but now test centers have electronic number dispensers, making the process more efficient. I've taken the test twice—the first time, I forgot my ID card and wasted half a day in line. The key is to bring all required documents, including the driving license application form and original ID card, and wait quietly without too much chatting. The test itself isn't hard, but stay focused—don't let the queuing process affect your performance. Review the traffic law question bank thoroughly to pass on your first attempt, saving both time and money.

Was this review help?
3
2
Share
Expand All
LolaFitz
11/07/25 6:05am

For the subject one exam, queuing and number-taking are essential for managing the flow of candidates. Due to limited capacity at the test center, the number-taking system ensures fair and orderly entry into the examination hall. After making an appointment, arrive on time at the designated spot to take a number and verify your identity to prevent cheating. The process is simple: present your ID to get a number, then wait for your turn, which may take 30 to 60 minutes. Bring your ID card to avoid delays, and make sure to review the traffic rules and question bank thoroughly for the exam.

Was this review help?
7
4
Share
Expand All
DeSavannah
12/28/25 7:53am

Want to take the Theory Test (Subject 1)? Queuing for a number is mandatory. First, book your test date online or through the driving school. On exam day, arrive at the test center 30 minutes early. Present your ID for verification when taking a number—either at a machine or service window. After getting your number, sit quietly and wait for the broadcast announcement to enter the exam room with your belongings. Bring a bottle of water or a small book to pass the time, but don’t be late or lose your spot. Review the question bank daily—doing a few sets of practice questions gives you a pass rate of over 95%, so no worries. After the test, head home relaxed and wait for the results while preparing for the next step: Subject 2 (practical driving).

Was this review help?
19
2
Share
Expand All
More Forum Discussions

What is the urban fuel consumption of the Senya M80?

Senya M80 fuel consumption is 6.8 to 7.5L/100km. The following is a related introduction to the Senya M80: Interior: In terms of interior, the Senya M80 also continues the original style and layout. The center console is relatively simple, using a combination of beige and silver tones, with a darker upper part and a lighter lower part, making the interior feel relatively warm. Performance: In terms of the powertrain, the Senya M80 uses a Toyota DVVT engine with a variable valve timing system. The maximum output power of 80KM/140Nm and maximum torque exceed international standards, and it has excellent energy-saving and environmental performance. Handling: In terms of handling, the Senya M80 adopts a rear-wheel-drive system, combined with high torque output, making it very smooth when cornering at high speeds. The minimum turning radius of 4.7 meters can adapt to various complex road conditions for driving and parking, providing effortless control. With a high ground clearance of 200mm, equipped with an A-type MacPherson front suspension and multi-link rear suspension, it offers excellent driving flexibility and off-road capabilities.
18
2
Share

Which gasoline grade is suitable for Volkswagen Bora, 92 or 95?

Volkswagen Bora uses 92-octane gasoline. Below are the relevant details: Reasons: The fuel grade suitable for the vehicle is listed on the label inside the fuel tank cover. Using 95-octane gasoline can make the engine run more smoothly and extend its lifespan, but it is more expensive. It is best to follow the fuel grade recommended on the label inside the fuel tank. Introduction: Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through distillation and cracking, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C.
8
0
Share

What is the Toyota Prado model series?

Toyota Prado refers to the Toyota PRADO model. Below are the details about the Prado: Exterior: The Prado boasts a luxurious and imposing appearance. Its large chrome front grille and newly designed headlight cluster are seamlessly integrated, enhancing the vehicle's overall cohesion. Additionally, the new body cladding and sporty 20-inch alloy wheels fully embody the rugged spirit of an off-road vehicle. Performance: The Prado offers two different engine options. The gasoline version features a classic 4.0-liter engine, while the diesel version is powered by Toyota's newly developed 2.8T turbocharged diesel engine. Moreover, this iconic Toyota Prado maintains an excellent four-wheel-drive system.
2
0
Share

What is the fuel consumption of the Nissan Qashqai 2.0L?

The Nissan Qashqai 2.0L generally has a fuel consumption of 6-8.4L/100km. Below are the specific details of the Qashqai 2.0L: Positioning: The Qashqai 2.0L is a vehicle under Dongfeng Nissan, positioned between a compact SUV and a hatchback sedan. Power: It is equipped with a 2.0L inline four-cylinder naturally aspirated engine with a maximum power of 154 horsepower, paired with a CVT continuously variable transmission. Interior and Configuration: It features the NissanConnect intelligent system, providing smart voice control, 24-hour entertainment, full-time navigation, and remote real-time monitoring connectivity technologies.
11
0
Share

What are the shortcomings of Lynk & Co?

Lynk & Co has the following shortcomings: no discounts, frequent infotainment system malfunctions, and slower market response compared to competitors. Below is an introduction to Lynk & Co: Lynk & Co: Lynk & Co is a premium joint venture brand launched through the collaboration between Geely Auto and Volvo Cars, combining Volvo's technology with Geely's latest automotive concepts. On August 4, 2017, Lynk & Co officially became a tripartite joint venture brand following the signing of a joint venture agreement by Geely Holding Group, Geely Auto Group, and Volvo Cars, marking the establishment of the joint venture company. Brand Philosophy: Born in the internet era, Lynk & Co integrates internet thinking with traditional automotive manufacturing to revolutionize mobility towards personalization, openness, and connectivity.
9
0
Share

How to Control Speed with the Accelerator in Subject Three?

In Subject Three, controlling speed with the accelerator requires gentle pressure. Avoid excessive force when pressing or releasing the accelerator. Press it lightly and lift it slowly. The accelerator and clutch should be coordinated to control speed. During driving, learn to increase or decrease the accelerator based on actual conditions and voice prompts. Below are tips on coordinating the clutch and accelerator in Subject Three road tests: 1. Press the clutch quickly but release it slowly, especially in 1st and 2nd gears. The clutch release should be slower but not as slow as during startup. Practice to get a feel for the right timing. Shifting from 2nd to 3rd gear at 25 km/h with a quick release is generally fine. Press the accelerator slowly, especially when starting in 1st gear or just shifting to 2nd. 2. During gear shifts in Subject Three, release the accelerator, quickly press the clutch, and shift gears slowly. No excessive force is needed—lightly push to neutral and then gently engage the next gear. It should engage smoothly; too much force may cause mis-shifts or jamming. 3. Do not press the clutch and accelerator simultaneously. When shifting, fully release the accelerator, then immediately press the clutch completely. After shifting, release the clutch slightly slower (slower than pressing it, but not as slow as during startup), then press the accelerator. 4. After releasing the clutch, move your foot away—resting it on the pedal counts as pressing. Prolonged pressing leads to coasting in neutral. For gear shifts, brake to reduce speed first, then press the clutch to shift. For stopping, press the clutch and brake directly. 5. During the roadside parking test, if not already in the rightmost lane, lightly brake to shift right before pressing the clutch.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.