Do I need to pull the handbrake after parallel parking?

1 Answers
DeMichael
07/30/25 2:44am
Pulling the handbrake after parallel parking will result in point deduction, so it is not necessary to pull the handbrake. The point deduction items for parallel parking include the vehicle body crossing the line after stopping in the parking space, stopping midway, and the tires touching the lane boundary line while driving. Among these, if the vehicle body crosses the line after stopping in the parking space or stops midway, 100 points will be deducted directly, resulting in test failure. If the tires touch the lane boundary line while driving, 10 points will be deducted. Parallel parking is one of the contents of the second subject of the driver's license test. Parallel parking is becoming increasingly common in cities, especially when parking spaces in formal parking lots are becoming more scarce. Many places have turned the original streets into parking spaces, forming "parallel parking spaces". After the implementation of the new traffic regulations, parallel parking no longer uses poles but adopts ground markings as the boundary of the parking space. For students learning the C1 driver's license, the length of the parallel parking space is 1.5 times the length of the vehicle plus 1 meter. Drive the vehicle to the front of the parking space parallel to the direction of travel, then reverse into the parking space to the right rear without any pauses. As long as the parallel parking is within this range and does not cross the boundary line of the parking space, it is considered a pass.
Was this review help?
3
2
Share
More Forum Discussions

What causes a motorcycle to jerk at low speeds but run normally at high speeds?

The reasons why a motorcycle jerks at low speeds but runs normally at high speeds are: 1. The carburetor is clogged or the air-fuel mixture is improperly adjusted; 2. Loose connections or poor contacts in the ignition system wiring and plugs; 3. Poor quality gasoline; 4. Incorrect spark plug electrode gap. A motorcycle is a nimble and fast means of transportation, driven by a gasoline engine, and is a two-wheeled vehicle steered by handlebars. Daily maintenance methods for motorcycles: 1. During the break-in period, keep the motorcycle idle speed at 100 rpm; 2. Match the gear with the speed; 3. When braking is needed due to an obstacle ahead, release the throttle, step on the rear brake with the right foot, and gently apply the front brake with the right hand; 4. Regularly check the spark plugs; 5. When installing a new spark plug, hand-tighten it until it can't be turned anymore, then use a spark plug socket to tighten it an additional quarter to half turn; 6. Regularly lubricate the chain.
13
2
Share

Is It Advisable to Purchase a Pledged Vehicle?

Pledged vehicles can be purchased and it is not considered a violation, but it is best to request a title transfer. Below are the detailed explanations regarding this matter: Legality: Purchasing a pledged vehicle is not illegal. If the mortgage has been lifted, the vehicle can be bought; if not, there will be risks involved in the future. For mortgages signed but not registered with the vehicle management office, the mortgage right is invalid, and the vehicle can be purchased. It is advisable to request a title transfer, and a specific time frame can be agreed upon in the contract for completing the transfer procedures. However, prolonged failure to transfer the title can lead to difficulties in obtaining vehicle insurance, and traffic accidents can become very troublesome. Driving without compulsory traffic insurance will result in inspections and penalties, and vehicle inspections will also be problematic. Conditions for the Validity of Pledge Rights: For pledges involving bills of exchange, promissory notes, checks, bonds, deposit receipts, warehouse receipts, or bills of lading, the right certificates must be delivered to the pledgee within the time limit agreed in the contract. For pledges involving legally transferable stocks, the pledgor and the pledgee must conclude a written contract and register the pledge with the securities registration authority. The pledge contract becomes effective from the date of registration. For pledges involving legally transferable trademark rights, patent rights, or property rights within copyrights, the pledgor and the pledgee must conclude a written contract and register the pledge with the relevant administrative department. The pledge contract becomes effective from the date of registration.
2
2
Share

How to Shift Back from S Gear to D Gear in an Automatic Transmission?

Switching between S gear and D gear in an automatic transmission is not affected by vehicle speed or road conditions, and there is no need to press the brake pedal; you can switch at any time. The gears in an automatic transmission vehicle include: 1. P gear for parking; 2. R gear for reverse; 3. N gear for neutral; 4. S gear for sport mode; 5. M gear for manual mode. The method for reversing an automatic transmission vehicle: 1. Press the brake pedal to stop the vehicle completely, then press the lock switch on the gear lever to shift to R gear; 2. Check the side mirrors and the reversing camera to ensure there are no obstacles behind the vehicle, and honk the horn twice to alert pedestrians and vehicles nearby; 3. Gradually release the brake pedal to allow the vehicle to move at a low speed.
5
3
Share

What are the causes of brake failure in Tesla Model 3?

Tesla Model 3 brake failure is caused by errors, delays, or interruptions in the transmission of electrical signals, leading to brake failure. The three main components of the braking system used in Tesla vehicles are: 1. The brake booster and its related electronic control module; 2. The brake modulator unit and its related electronic control module; 3. The disc brake calipers, brake pads, and wheel speed sensors on all four wheels. Taking the 2021 Tesla Model 3 as an example, its body dimensions are: length 4694mm, width 1850mm, height 1443mm, with a wheelbase of 2875mm and a trunk capacity of 425 liters.
12
0
Share

What is the difference between zr17 and r17 tires?

The difference between zr17 and r17 tires lies in their speed ratings: zr17 is a radial tire with a Z speed rating, while r17 is a radial tire. The functions of tires are: 1. To transmit driving force, braking force, and steering force for vehicle operation; 2. To support vehicle loads; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging vehicle components. Methods for tire maintenance include: 1. Regularly removing stones stuck in tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Adopting careful driving habits by choosing smooth road surfaces and avoiding objects that could puncture or scratch tires, as well as chemical spills that may corrode tires.
2
5
Share

What are the symptoms of transmission failure in the Buick LaCrosse 2.4?

The symptoms of transmission failure in the Buick LaCrosse 2.4 are: 1. Jerky gear shifting when upshifting or downshifting; 2. Transmission slipping, lack of acceleration, delayed engagement, and gear disengagement; 3. Harsh gear shifting. Taking the 2013 Buick LaCrosse as an example, it belongs to the mid-size car category with body dimensions of: length 5005mm, width 1858mm, height 1496mm, wheelbase 2837mm, fuel tank capacity 70L, and curb weight 1750kg. The 2013 Buick LaCrosse features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.4L naturally aspirated engine, delivering a maximum horsepower of 186PS, maximum power of 137kW, and maximum torque of 240Nm, paired with a 6-speed automatic transmission.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.