Do I need to pick up the car in person?

What is the reason why the BYD F0 has electricity but does not respond when starting?

BYD F0 starting the car without response with fuel and electricity is caused by poor contact of the starter solenoid coil. In this case, you can try tapping the starter solenoid coil with a pipe. If it doesn't work, the starter may need to be replaced. Starting without response due to incorrect gear selection: Some people, when parking and turning off the engine, do not shift the gear to P but directly to D. Because shifting to D or R gear makes it impossible to start the engine, only shifting to P or N gear can start the engine. Therefore, when they want to start the car again, they cannot ignite the engine. Poor working condition of the ignition system: Especially in cold weather, due to low intake air temperature, the fuel is not well atomized in the cylinder. If combined with insufficient ignition energy, the result will be a flooded cylinder phenomenon, where too much fuel accumulates in the cylinder, exceeding the ignition limit concentration and making it impossible to start the car. Emergency method: You can unscrew the spark plug and wipe off the oil between the electrodes, then reinstall it to start the car. The thorough method is to check the ignition system and eliminate the causes of low ignition energy, such as spark plug electrode gap, ignition coil energy, high-voltage line status, etc.

4

1

Share

What Causes the Car Body to Be Not Straight When Pulling Over in Driving Test Subject 3?

The following are the reasons why the car body is not straight when pulling over in Driving Test Subject 3: 1. Reason one: This is mainly due to insufficient technique. Pay attention to the rearview mirror and observe the angle between the car body and the curb. If they are parallel, the car won't stop crookedly. 2. Reason two: Keep your hands relaxed and lightly hold the steering wheel without applying too much force. Look towards the end of the road instead of focusing on the front of the car. If the car starts to veer, make slight adjustments and then straighten the steering wheel. When parking, first turn backward. When the car body is about 30cm away from the curb, turn the steering wheel to the left. Once the car body is parallel to the curb, straighten the wheel and make minor adjustments. 3. Reason three: During practice, mark the middle of the engine hood. When pulling over, immediately level the steering wheel once the mark touches the edge of the road. While slowly pulling over, keep an eye on the right front corner of the car to prevent collision with the roadside. At the same time, use the rearview mirror to adjust the distance between the car body and the roadside. This adjustment action can be recalled from the process of correcting the car body's position within the garage during Subject 2's reverse parking exercise.

18

0

Share

What type of engine oil should be used for an Alto?

The Alto should use 5W20 engine oil. The functions of engine oil include: lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, shock absorption, and anti-wear. Taking the 2016 Alto as an example, it is a microcar with body dimensions of: length 3570mm, width 1600mm, height 1470mm, a wheelbase of 2360mm, a minimum ground clearance of 115mm, and a body weight of 890kg. The 2016 Alto is equipped with a 1.0L naturally aspirated engine, producing a maximum horsepower of 71PS, a maximum torque of 92Nm, and a maximum power of 52kW. It is paired with a 5-speed manual transmission.

17

1

Share

What does MUTE mean in cars?

MUTE literally means "silent", so the MUTE button in cars is used to control the mute mode of multimedia. Here are the methods to use the MUTE button: 1. To mute, simply press the MUTE button in the car. 2. Activate your car's voice assistant and instruct it to turn on the windshield defogging function for you. Here are the main functions of the buttons on the right side of the steering wheel: 1. Mode (MODE). Cycle through FM/AM/online radio/USB/local/Bluetooth music. 2. Voice control. When not on a call, press to enter the voice assistant interface. 3. Resume (RES+). Resume or increase cruise control speed.

18

4

Share

What is the reason why the brake cannot be pressed when the vehicle is not started?

The reason why the brake cannot be pressed when the vehicle is not started is the lack of vacuum. Solutions for brake noise: 1. Press the brake pedal firmly several times or perform emergency braking in an open area to improve the situation; 2. Replace the car's brake pads in time to prevent potential hazards. Methods for braking under different driving conditions: 1. If the brake pedal is abnormal, use engine braking and shift to a lower gear; 2. In traffic congestion, press the brake pedal gently; 3. On rainy or muddy roads, lightly press the brake pedal continuously; 4. In emergency situations, press the brake pedal firmly and then release it slowly, followed by repeatedly pressing and releasing the brake pedal gently.

4

0

Share

What does the torque of a car mean?

The torque of a car refers to the rotational force output from the crankshaft end of the engine. Here is relevant information about torque: 1. Under fixed power conditions, it has an inverse relationship with engine speed - the faster the speed, the smaller the torque, and vice versa. This reflects the vehicle's load capacity within a certain range. 2. Automotive torque is one of the main indicators of an engine, reflected in vehicle performance including acceleration, climbing ability, and suspension. 3. Torque is an important standard for measuring the quality of a car engine. The magnitude of a vehicle's torque is directly proportional to the engine's power. 4. Generally speaking, if the peak torque can be achieved at relatively low engine speeds, it indicates that the engine has good craftsmanship and strong power output.

16

2

Share

Do I need to pick up the car in person?

What is the reason why the BYD F0 has electricity but does not respond when starting?

What Causes the Car Body to Be Not Straight When Pulling Over in Driving Test Subject 3?

What type of engine oil should be used for an Alto?

What does MUTE mean in cars?

What is the reason why the brake cannot be pressed when the vehicle is not started?

What does the torque of a car mean?

What does eco throttle guidance mean?

What does it mean for a car to have no paperwork?

What is the license plate prefix for Linyi?

What is the impact of China VI implementation on used cars?