Do I need to go to the DMV to get the green book for a fully paid car?

2 Answers
DelJaxson
08/30/25 4:33am
Yes, you need to go to the vehicle management office to collect it. Here is the relevant information: Introduction to the vehicle green book: The motor vehicle registration certificate is the legal proof of vehicle ownership, kept by the vehicle owner and not carried with the vehicle. It is required to be presented for any vehicle registration procedures such as transfer or change of ownership, and records the relevant details of the vehicle, serving as the vehicle's household registration book. Application process: To apply for a replacement motor vehicle registration certificate, the vehicle owner must bring the vehicle to the DMV. If the vehicle owner is a natural person applying for a replacement "Motor Vehicle Registration Certificate," they must apply in person and cannot delegate the task to others. If the vehicle owner cannot be present to apply for a replacement due to reasons such as death, overseas travel, serious illness or disability, or force majeure, relevant proof must be provided.
Was this review help?
17
2
Share
LaBrooke
09/11/25 8:33am
When I first bought a car, I also wondered if I had to make a special trip to the DMV to get the green title. Later, I learned that for fully paid vehicles, the green title, as the certificate of ownership, must be collected in person at the DMV after completing the license plate registration or transfer procedures. It is not automatically mailed to your home. Bring your ID, purchase invoice, and vehicle registration certificate, and you'll need to sign for confirmation on-site. The whole process might take one or two hours of waiting, especially if you go early to avoid the morning rush, which is more convenient. That time, I delayed for half a day and ended up facing a huge crowd. After getting the green title, I felt much more secure. Don't skip this step—it's the car's proof of identity, essential for selling or insuring the car later. Remember to store it properly in a dry place to avoid the extra hassle of losing it.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

What causes the engine yellow warning light to come on?

There are many reasons for the engine fault yellow warning light to illuminate, with the following being the most common: 1. The oxygen sensor connector is damaged or loose, causing the air-fuel mixture to be too lean or too rich. 2. Poor quality or substandard gasoline leads to insufficient combustion of the air-fuel mixture during engine operation. 3. Poor engine maintenance, such as issues with spark plugs, ignition coils, fuel pumps, or clogged fuel lines, resulting in poor combustion of the engine's air-fuel mixture. 4. The engine requires air for combustion; a dirty air filter that hasn't been cleaned regularly can affect the engine's air intake, leading to long-term clogging and potentially causing the engine fault light to illuminate.
4
1
Share

What are the reasons for the Haval H2 generator not generating electricity and lacking power assistance?

Haval H2 generator not generating electricity and lacking power assistance mainly has the following reasons: 1. Car battery failure. 2. Poor line contact, short circuit or open circuit, causing the generator to fail to work and power cannot be supplied, resulting in the phenomenon of no power assistance. The following is a partial introduction about the battery: 1. The battery is an essential part of the car, which can be divided into traditional lead-acid batteries and maintenance-free batteries. 2. Compared with traditional batteries, maintenance-free batteries have the advantages of not needing to add any liquid, connecting to the terminal, and long power storage time.
7
2
Share

How to Replace the Dashboard Bulb of a Tiida?

The method for replacing the dashboard bulb of a Tiida is as follows: Remove the lower decorative panel of the dashboard, then take off the outer decorative cover, after which you can remove and replace the damaged bulb. If the dashboard light cannot be turned off, there is no need to replace the bulb. Below are the reasons why the dashboard light may not turn off and their solutions: 1. Automatic illumination: The dashboard light remains on after closing the car door, which is one of the car's features. It will turn off after locking the car. 2. Non-automatic illumination: The dashboard light changes with the headlight switch. When the headlights are turned off, the dashboard light will also turn off. 3. Fault light: A component inside the car is faulty. The issue needs to be resolved, and a diagnostic tool must be used to clear the fault code before the light will turn off.
8
5
Share

How to Identify China 5 and China 6 Standards When Buying a Car?

Methods to distinguish between China 5 and China 6 standards are as follows: 1. Vehicle Conformity Certificate: Upon leaving the factory, each vehicle comes with a Vehicle Conformity Certificate stamped by the manufacturer or signed by the vehicle conformity supervisor. 2. Environmental Information Onboard List: This list directly indicates the vehicle's environmental impact and specifies which emission standard it meets. Consumers can clearly determine the vehicle's exhaust emission stage by reviewing this onboard list. 3. Vehicle Qualification Certificate: The qualification certificate is a crucial document for a car, essential for vehicle registration. Only cars with this certificate meet the national requirements for motor vehicle equipment quality and relevant standards.
16
1
Share

What are the causes of weak starter cranking?

The main reasons for weak starter cranking include insufficient battery charge, and excessive resistance caused by poor wiring or connections, leading to reduced current. Specific causes are as follows: 1. The battery is undercharged and cannot power the starter sufficiently, or there is poor contact in the battery starter cables. 2. Starter malfunction. 3. Faults in the starter-related circuits. Methods for diagnosing weak starter cranking include: 1. Checking the connection of the car battery cables. 2. Verifying whether the car's starting voltage is within the standard range. 3. Inspecting the car's starting circuit for aging or leakage.
13
0
Share

What type of oil does the CS55 use?

The original factory oil specification for the CS55 is SL grade 5W-30. If you wish to change the oil during later maintenance, you can choose from brands such as Mobil and Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in the CS55 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the oil filler cap on the engine valve cover. Generally, fill about three-quarters of a bottle. Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs. After stopping the engine, pull out the oil dipstick to check if the oil level is within the standard range.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.