Do I need to go in person for vehicle inspection?

1 Answers
RichardLee
07/29/25 11:30am
Vehicle inspection does not require the owner to be present in person. The annual vehicle inspection service can be handled by an agent. Currently, many insurance companies, car dealerships, and third-party services offer agent-handled inspection exemption services. Insurance companies use this as a way to attract customers—as long as the vehicle owner is insured with their company, they can handle the annual inspection on behalf of the owner. When using an agent for the inspection, the owner needs to prepare the vehicle registration certificate, driver's license, the previous year's vehicle inspection sticker, and a copy of the valid compulsory traffic insurance policy in advance. The owner then hands the vehicle over to the agent, who will drive it to the designated inspection center. After the inspection is completed, the agent will return the vehicle to the specified location and hand over the relevant documents to the owner. The owner can then verify the inspection results and confirm everything is correct.
Was this review help?
18
1
Share
More Forum Discussions

What is the current load capacity for a 4-axle truck with front 4 and rear 8 wheels?

Introduction to the meaning of front 4 and rear 8: For 4-axle vehicles on the road, the traffic department requires that the total weight of the vehicle and cargo does not exceed 40 tons. According to traffic department regulations, with a standard of not exceeding 30% overload, a front 4 and rear 8 vehicle has a load capacity of 38 tons, and can carry up to 49.4 tons when overloaded by 30%. Here is some related content: 1. Heavy-duty vehicles refer to M-class and N-class vehicles with a maximum total mass greater than 3500Kg. This type of vehicle consists of a heavy-duty tractor and a heavy-duty trailer forming a vehicle train. 2. This type of vehicle generally uses multi-axle tandem hydraulic suspension systems and is typically used to transport large cargo items whose size and weight exceed the limits set by road traffic regulations.
18
4
Share

What is the displacement of the Audi Q5 40TFSI?

The Audi Q5 40TFSI has a 2.0T displacement. Here are the details about the Audi Q5 40TFSI: 1. Meaning: The number '40TFSI' at the rear of the car represents the vehicle's acceleration value. A higher number indicates faster acceleration. 2. Configuration: The Q5 40TFSI is a midsize SUV with body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height. It has a wheelbase of 2807mm and a fuel tank capacity of 75L. The Q5 40TFSI is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 230ps, a maximum power of 169kw, and a maximum torque of 350nm. It is paired with an 8-speed automatic transmission. The front suspension is a five-link independent suspension, and the rear suspension is a trapezoidal link independent suspension.
10
3
Share

How to Check Brake Pad Wear?

Methods for observing car brake pad wear are as follows: 1. Check thickness: The thickness of brake pads greatly affects braking performance. When pads become thin, timely replacement is necessary to avoid abnormal braking while driving. Generally, new brake pads are about 1.5cm thick. For safety, consider replacing them when worn down to 0.5cm; 2. Dashboard alert: Many modern cars have warning systems that help drivers monitor brake system status. If there's an issue with the brake pads, the brake warning light on the dashboard will illuminate, prompting the owner to inspect and determine if replacement is needed; 3. Sound: Car brake pads are typically made of iron. If unusual noises occur during braking and persist, immediate inspection is required as this may indicate the pads have exceeded their wear limit and need replacement; 4. Braking performance: Experienced drivers can assess pad wear through braking effectiveness. If braking becomes less effective or the pedal position feels noticeably lower during emergency stops, it indicates significant pad wear requiring prompt replacement.
16
3
Share

Which Button is the Cruise Control?

Currently, most cruise control systems mainly consist of the following buttons: the power button (ON/OFF), the cancel button (CANCEL), the set current speed button (SET), the resume set speed button (RES), the accelerate button (+) usually paired with the RES button, and the decelerate button (-) paired with the SET button. Below are the conditions under which cruise control should not be used: 1. Non-enclosed roads: In principle, cruise control should be used on highways or fully enclosed roads. On non-enclosed roads, complex road conditions are not conducive to traffic safety; 2. Rainy or snowy days: Use with caution on rainy days and avoid on snowy days; 3. Mountainous or winding roads: Use with caution on roads with many turns or curves. Under normal circumstances when exiting a curve, it is necessary to appropriately accelerate to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed, with the throttle controlled by the onboard computer, which often poses a danger when driving on winding roads.
9
3
Share

How to Transfer a Company-Owned Vehicle to an Individual?

Go to the vehicle management office to obtain the vehicle transfer application form and agreement. Fill out the transfer application form and agreement. For company-owned vehicles: the company seal is required, along with proof from both the buyer and seller, a copy of the new owner's business license, and for passenger cars, a copy of the allocation certificate. Here are additional details: 1. Vehicle Transfer: Clear any traffic violation records of the vehicle to ensure the traded vehicle is within its annual inspection validity period. With the completed transfer application form, agreement, relevant copies, and the original vehicle license, go to the used vehicle trading point to obtain the appraisal form. The owner should bring all necessary documents to the vehicle management office to complete the vehicle transfer approval process. 2. Notes: Before purchasing a vehicle, the buyer should check whether the vehicle's documentation is complete and verify if the vehicle can be legally transferred before inspecting the vehicle's condition. When buying a used car, the first step is always to check the vehicle's documentation—only vehicles with complete documentation can be legally traded.
7
1
Share

Why does the brake feel soft when pressed?

The reasons for a soft brake pedal are: 1. Brake system oil leakage; 2. Deteriorated brake fluid; 3. Excessive wear of brake pads; 4. Damage to the brake master cylinder. The brake is a mechanical braking device that can slow down the vehicle, also known as a decelerator. The car brake pedal is located under the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake shoes on the brake drum, clamping the brake disc, thereby slowing down or stopping the car. When driving in water, the wheels are almost submerged, leaving a layer of water film between the brake shoes and the brake drum, acting like a lubricant, reducing the friction between them and making it difficult to control the car to stop. Additionally, the water inside the drum is not easily dispersed.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.