···
Log in / Register

Do I need to get a stamp on my vehicle license when the 2-year exemption period for the 6-year inspection-free policy expires?

4 Answers
CamilleAnn
09/05/25 6:04am
In 2021, vehicle inspection requires a stamp on the vehicle license. However, for vehicles under the 6-year inspection-free policy, no stamp is needed on the vehicle license, meaning there is no need to endorse the inspection validity period. Instead, you only need to apply for an annual inspection decal at the vehicle management office every 2 years. Introduction to the new regulations: Starting from July 2018, the new regulations stipulate that vehicles eligible for the 6-year inspection-free policy only need to bring their ID card to the vehicle management office to collect the inspection compliance decal when handling annual inspection procedures. The inspection validity date will no longer be stamped on the supplementary page of the vehicle license, further simplifying the inspection process for inspection-free vehicles and making it more convenient for many new car owners. Things to note: Failing to collect the inspection-free decal on time or not displaying the annual inspection decal as required constitutes a traffic violation and will result in corresponding penalties.
Was this review help?
7
5
Share
WilliamLynn
09/17/25 6:25am
I have a car that's been in use for almost four years, still within the six-year exemption period from mandatory inspections. Every two years when the deadline approaches, the vehicle license does need to be stamped to update the inspection mark. Last time I went to the DMV, the staff stamped a red seal on the supplementary page, indicating the next due date. The whole process took just ten minutes, with no need for a paid on-site inspection. Some friends worry about complicated procedures, but nowadays many cities offer online appointment services via apps—just fill out a form, upload documents, and after backend processing, you only need to visit to get the license stamped. Don’t procrastinate; if you forget to update the stamp and get stopped by police, you might face fines, penalty points, and it could affect future insurance claims. I recommend setting a reminder one month in advance—safety first, plus it saves hassle.
Was this review help?
18
4
Share
Expand All
PatrickAnn
10/31/25 6:56am
Every two years when the expiration date arrives, the vehicle license must be stamped to indicate the completion of the inspection mark application. The procedure is simple: bring the vehicle license and ID card to the DMV window, where the staff will verify and stamp to update the record. For convenience, you can apply through relevant mini-programs on WeChat or Alipay, have it mailed home, and confirm the stamp yourself, saving the queuing time. If the vehicle license is not stamped, it is considered invalid, and getting checked on the road could lead to big trouble. It is recommended to prioritize online processing and regularly check the status of your documents while driving to avoid major losses for minor gains.
Was this review help?
19
5
Share
Expand All
JoelRose
12/14/25 7:04am
According to regulations, during the six-year exemption period for new vehicles, a compliance label must be obtained every two years, and the vehicle registration certificate will be stamped to confirm the updated date. Failure to get the stamp is equivalent to document invalidation, which may easily result in fines. The process can be completed either on-site or online, making it quick and convenient. Maintaining this practice helps avoid non-compliance risks with vehicle inspections, ensuring worry-free driving.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

How many liters of oil should be added to a BMW X1?

The oil filling capacity for a BMW X1 is generally 4.5L, but it may vary depending on different vehicle configurations. Therefore, car owners need to add oil based on the actual condition of their vehicles. The amount of oil added can affect the operation of the engine, thereby influencing the normal functioning of the car. Below is some relevant information about engine oil: 1. Engine oil, as a lubricant for the engine, is equivalent to the 'blood' of a car and plays a very important role. It is also crucial for maintaining the lifespan of the engine. Of course, its functions are diverse, mainly including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion prevention, and shock absorption. 2. The choice of lubricant is very important for the engine. Only by selecting the appropriate lubricant can the wear of engine parts be reduced, thereby extending the engine's lifespan. However, the most expensive lubricant is not necessarily the best; only the lubricant that matches the engine is the best and most suitable. Therefore, choosing the right lubricant is very important for the engine.
8
1
Share

Does BMW have a spare tire?

BMW older 5 Series models have a spare tire, located under the floor in the trunk. New models do not have one. The reason why the new BMW models do not come with a spare tire is because they use run-flat tires. The advantage of run-flat tires is that they enhance driving feel and handling. The classifications of spare tires are as follows: 1. Full-size spare tire: A full-size spare tire has the exact same specifications as the other four tires on the vehicle and can replace any temporarily or permanently unusable tire. 2. Compact spare tire: This type of spare tire has a slightly smaller diameter and width compared to the other four tires, so it can only be used as a temporary replacement and should only be used on non-driving wheels. Additionally, the maximum speed should not exceed 80 km/h. 3. Run-flat tire: Also known as a safety tire (run-flat tire), commonly referred to as a "run-flat tire," the industry directly translates it as "tire that can run when flat." Compared to regular tires, run-flat tires do not lose air or lose air very slowly when punctured, maintaining the driving profile, and the tire bead remains fixed on the rim, ensuring the car can drive for a long time or temporarily to a service station.
8
1
Share

How many liters of transmission oil does the Elantra require?

Elantra requires 4 liters of transmission oil. Introduction to Elantra: 1. Elantra is a typical model under Beijing Hyundai. The car's intake grille features a full chrome-plated design, exuding a sense of high-end fashion. The design includes a relatively short rear end, which enhances the sporty feel. 2. Elantra is a global model that Hyundai first launched overseas. The car has a body length of 4570mm, width of 1775mm, and height of 1445mm. It is equipped with a multifunctional steering wheel that includes buttons for audio, cruise control, Bluetooth calling, and more. The buttons are specifically designed in an arc shape for greater convenience. Additionally, it features dual-zone automatic air conditioning, with a very clear and rational layout in the most compact spaces.
10
1
Share

What is the ground clearance of the BJ80?

The minimum ground clearance of the BJ80 is approximately 250 millimeters, a height that allows this vehicle to handle most complex road conditions. The BJ80 is a rugged off-road vehicle, equipped with a 2.3-liter turbocharged engine across all models. This engine delivers a maximum power of 170 kilowatts and a peak torque of 345 Newton-meters, paired with a 6-speed automatic transmission. The BJ80 features a part-time four-wheel-drive system, which enhances its off-road capabilities. This four-wheel-drive system offers three modes: high-speed four-wheel-drive mode, low-speed four-wheel-drive mode, and high-speed two-wheel-drive mode. The dimensions of the BJ80 are 4765 millimeters in length, 1955 millimeters in width, and 2005 millimeters in height, with a wheelbase of 2800 millimeters.
18
1
Share

Can 92 and 95 gasoline be mixed?

92 gasoline and 95 gasoline cannot be mixed because their isooctane content is different. 92 gasoline is suitable for engines with low compression ratios, while 95 gasoline is suitable for engines with high compression ratios. If 92 gasoline is added to a car that should use 95 gasoline, abnormal combustion may occur, leading to knocking. Knocking not only damages the combustion chamber but also directly affects the normal operation of the engine, and in severe cases, may cause engine damage. If 95 gasoline is added to a car that should use 92 gasoline, although it will not damage the engine, 95 gasoline is more expensive than 92 gasoline, resulting in waste. The difference between 92, 95, and 98 gasoline: Standard gasoline is composed of isooctane and n-heptane. Isooctane has good anti-knock properties, and its octane number is defined as 100; n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, so its octane number is defined as 0. If the gasoline is labeled as 92, it means that this gasoline has the same anti-knock properties as standard gasoline containing 92% isooctane and 8% n-heptane. The same principle applies to 95 and 98 gasoline. What to do if the wrong gasoline is added: If gasoline with a higher octane number than specified is added, for example, adding 95 gasoline when 92 is specified, simply switch back to 92 gasoline after the current fuel is consumed. If gasoline with a lower octane number than specified is added, for example, adding 92 gasoline when 95 is specified, you can add a high anti-knock fuel additive. Of course, you can also directly drain the fuel and refill with 95 gasoline. To find out which gasoline your car requires, you can check the car's user manual or the fuel label on the fuel tank cap.
15
2
Share

What transmission is used in the BJ80?

All models of the BJ80 use a 6AT transmission, which offers good reliability and durability. AT transmissions can also withstand high torque. The AT transmission is also known as a torque converter transmission, and it is connected to the engine via a torque converter. There are three common types of automatic transmissions: dual-clutch transmission (DCT), AT transmission, and CVT transmission. The CVT transmission has good reliability and durability, but it cannot withstand high torque. The dimensions of the BJ80 are 4765 mm in length, 1955 mm in width, and 2005 mm in height, with a wheelbase of 2800 mm.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.