Do I need to collect the inspection sticker during the biennial vehicle inspection?

What are the precautions for vehicle maintenance in summer?

Precautions for vehicle maintenance in summer: 1. Check tire pressure and temperature to prevent blowouts. High summer temperatures can increase tire wear due to excessive pressure and may cause blowouts, so regularly inspect tire temperature and pressure while driving in summer; 2. Monitor engine coolant temperature rise and avoid running the engine with insufficient coolant; 3. Prevent vehicle self-ignition due to aging wiring, and frequently inspect fuel lines to avoid oil leaks; 4. Be cautious of brake system overheating leading to brake failure. Before driving, check if the water sprayer is functioning properly and if there is sufficient water in the tank; 5. Equip a car fire extinguisher for timely self-rescue.

18

0

Share

How to Determine If Brake Fluid Needs Replacement

To determine if brake fluid needs replacement, check its water content. If the water content reaches 3%, the brake fluid should be replaced immediately. When brake fluid absorbs a certain amount of water, its boiling point decreases because water has a lower boiling point. During braking, the heat generated can cause the brake fluid to heat up. If the brake fluid contains water, it may boil and vaporize, leading to vapor lock and reduced braking performance. Brake fluid, also known as hydraulic brake fluid, can be tested for water content using a moisture detection pen available at 4S shops. Simply insert the pen into the brake fluid reservoir to check the water content. If a moisture detection pen is not available, it is recommended to replace the brake fluid every 2 years.

3

2

Share

Can Different Tires Pass the Annual Inspection?

Vehicles with different tire brands on the front and rear can pass the annual inspection, but the models, specifications, and tread patterns on both sides of the same axle must be the same. Here is some relevant information: Exemption Scope: The exemption scope for motor vehicles has been expanded from non-commercial small and mini passenger vehicles with 6 seats or fewer within 6 years to those with 7-9 seats. In other words, after November 20th, non-commercial small and mini passenger vehicles with 7-9 seats that are less than 6 years old will be eligible for the exemption policy. Inspection Cycle: Vehicles exempt from inspection can avoid on-site testing for the first 6 years, only requiring formalities every two years. From 6 to 10 years, an annual inspection is required. The new regulations indicate that the inspection cycle for private vehicles remains unchanged for the first 6 years, while vehicles aged 6-10 years will change from an annual inspection to a biennial inspection. This means that exempt vehicles will have biennial inspections within 10 years, but only the sixth and eighth years require on-site testing.

2

3

Share

Which country does Zotye Auto belong to?

Zotye Auto is a Chinese independent brand, a vehicle manufacturing enterprise focusing on the R&D, production, and sales of complete automobiles. Taking the Zotye T600 as an example, this model is positioned as a mid-size SUV with dimensions of 4648mm in length, 1893mm in width, and 1686mm in height, and a wheelbase of 2807mm. The Zotye T600 is equipped with a 1.5T turbocharged engine independently developed by Zotye Auto. This engine, supplemented by electronic throttle control, can deliver a maximum power output of 115kW. Its front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.

17

5

Share

Under what circumstances can high beams be used?

Circumstances allowing high beam usage: 1. When driving on roads with poor lighting conditions lacking illumination facilities, such as highways, foggy or rainy days with low visibility; 2. Switching to high beams when approaching oncoming vehicles; 3. When overtaking, turn on the turn signal and use high/low beam alternation to alert the vehicle ahead; 4. Use high/low beam alternation at intersections to warn vehicles on both sides. Note: Avoid using high beams in urban areas as most cities have adequate lighting - the elevated angle of high beams may dazzle oncoming drivers and pedestrians, compromising their vision and creating safety hazards.

20

0

Share

What is the weight of the GAC GS8 body?

The weight of the GAC GS8 body is divided into: the luxury version weighs 1772kg; the premium version weighs 1810kg. The GAC GS8 is a mid-to-large-sized SUV, with a body length, width, and height of 4810mm, 1910mm, and 1770mm respectively, and a wheelbase of 2800mm. The GAC GS8 is equipped with a 2.0-liter turbocharged engine across all models, with a maximum power output of 185kW and a maximum torque of 390Nm. The engine reaches its maximum power at 5250 rpm and its maximum torque between 1750 and 4000 rpm. The drive system is front-engine, front-wheel drive. This engine is equipped with DCVVT technology and direct fuel injection technology, and uses an aluminum alloy cylinder head and cast iron cylinder block.

18

2

Share

Do I need to collect the inspection sticker during the biennial vehicle inspection?

What are the precautions for vehicle maintenance in summer?

How to Determine If Brake Fluid Needs Replacement

Can Different Tires Pass the Annual Inspection?

Which country does Zotye Auto belong to?

Under what circumstances can high beams be used?

What is the weight of the GAC GS8 body?

Where is the heater valve located on the Xiangling M2?

Is the Audi A6L equipped with a wet dual-clutch transmission?

How to Turn Off the Auto Start-Stop Function in a Vehicle?

What is the minimum age to obtain a motorcycle license?