Do I Need to Change Tires When Changing Rims?

1 Answers
MacBarrett
07/24/25 1:23am
Changing the car's rims does not necessarily require changing the tires. Here is relevant information about replacing rims and tires: 1. Introduction: (1) Rim size is a crucial parameter to determine whether a tire can be mounted on the rim. If the new tire specifications match the original ones, there is no need to change the rims. (2) The purchased tire specifications must be consistent with the original tires installed on the car. If modifications to tire specifications are needed, it is essential to visit a professional tuning shop for tire upgrades or consult the car manufacturer. 3. Note: Installing tires of incorrect sizes on the rims can easily cause the tires to dislodge during aggressive driving. Tires must be properly fitted on the rims, and the tire width must match the rim size (J value). Exceeding or falling short of the required size can lead to the tire detaching from the rim, creating safety hazards.
Was this review help?
17
2
Share
More Forum Discussions

What to Do When the Car Navigation Touch Screen Malfunctions?

There are many reasons for touch screen malfunctions, generally due to screen damage or loose connections. Below are the daily usage and maintenance tips for vehicle navigation systems: 1. Start the car first: Start the car before plugging in the cigarette lighter power source. After navigation, unplug the cigarette lighter and plug it back in after the next car start. This helps protect the machine's battery and extend its lifespan. 2. Shutdown sequence: First close the page, then turn off the device, and finally unplug the power. Some car owners find it convenient to unplug directly after use without shutting down, which may save time but can damage electronic components over time. 3. Avoid letting the navigation screen come into contact with sharp objects, as they may damage the screen. 4. Do not leave portable navigation devices exposed to direct sunlight for extended periods: Large temperature differences not only affect the battery life of the navigation system but also the touch sensitivity of the LCD screen.
18
3
Share

What does final drive oil mean?

Final drive is actually the part that connects the two rear wheels of a car. The correct technical term for final drive is final reduction ratio gear. Final drive oil is the oil injected into the final drive gear. In layman's terms, it is gear oil, also known as differential oil. Origin of final drive oil: The final drive of front-wheel-drive vehicles is generally located in the transmission, while the final drive of rear-wheel-drive vehicles is usually independent on the rear drive axle. Final drive oil is a common term, and its correct name should be gear oil. Gear oil is an important lubricating oil mainly composed of petroleum-based lubricating oil or synthetic lubricating oil, with the addition of extreme pressure anti-wear agents and oiliness agents. Function of final drive oil: Final drive oil is used in various gear transmission devices to prevent tooth surface wear, scratches, sintering, etc., prolong their service life, and improve power transmission efficiency. Gear oil should have good anti-wear, load-bearing performance, and appropriate viscosity. How often should final drive oil be changed: Final drive oil should be changed every 80,000 to 100,000 kilometers.
19
3
Share

What are the dimensions of the Vellfire?

The dimensions of the Vellfire: the length, width, and height are 4975 mm, 1850 mm, and 1890 mm respectively, with a wheelbase of 3000 mm. The Vellfire is an MPV model, offering a very spacious interior and excellent ride comfort. The Vellfire features a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear. The Vellfire is a hybrid vehicle, equipped with a 2.5-liter naturally aspirated engine and two electric motors. The 2.5-liter naturally aspirated engine delivers a maximum power of 86 kW and a maximum torque of 198 Nm, with the maximum power achieved at 4700 rpm and the maximum torque available between 2800 and 4000 rpm. It is paired with two electric motors, one on the front axle and the other on the rear axle. The front motor produces a maximum power of 105 kW and a maximum torque of 270 Nm, while the rear motor delivers a maximum power of 50 kW and a maximum torque of 139 Nm.
9
3
Share

What are the requirements for establishing a Class II automobile repair shop?

The requirements for establishing a Class II automobile repair shop are as follows: 1. Equipment conditions: The models, specifications, and quantity of equipment provided by the enterprise should be compatible with its production program and process. The technical condition of the equipment should be intact, meeting the requirements for processing, testing accuracy, and usage. For outsourced equipment, a legitimate technical and economic contract must be available. The following specialized equipment is required: testing, inspection, and diagnostic equipment, general equipment, measuring instruments, and essential hand tools. 2. Facility conditions: The structure and facilities of the production workshop and parking lot must meet the requirements for automobile maintenance and minor repairs, complying with safety, environmental protection, health, and fire prevention regulations. The ground should be solid and level. The parking area must have clearly defined boundaries, and maintenance, minor repairs, and parking are not allowed on roads or public spaces. 3. Personnel conditions: There must be at least one technical personnel with professional knowledge and a qualification certificate, formally employed by the repair shop as an assistant engineer or higher-level technician, responsible for technical management.
11
3
Share

What are the consequences of a motorcycle tipping over?

After a motorcycle tips over while stationary, it can cause damage to the handlebar shock absorbers, clutch lever, or brake lever. If you're concerned about damage from a stationary tip-over, you can install crash bars, which are very effective. Motorcycles are a popular mode of transportation for many consumers. Introduction 1: Motorcycles are powered by gasoline engines and steered by handlebars to control the front wheel. They are lightweight, flexible, and fast, widely used for patrols, passenger and cargo transportation, and also as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. Introduction 2: In 1885, German inventor Gottlieb Daimler installed an engine into a framed machine, giving birth to the world's first motorcycle. Motorcycle sports, related to motorcycles, are a type of military sports activity, a competitive sport using motorcycles as equipment. They are divided into two-wheeled and three-wheeled models, with each model categorized into several classes based on engine cylinder displacement. Competitions can be divided into off-road races, multi-day races, road races, circuit races, and touring races, among others, with rankings determined by speed or driving skills.
4
5
Share

What is the maximum temperature inside a car in summer?

When a car is exposed to the sun for a long time in an outdoor environment with a temperature of 40℃, the temperature inside the car can exceed 70 degrees and reach up to 90 degrees. Here are some related details: 1. Car body surface: The metal exterior of the car body absorbs heat more easily, resulting in higher temperatures, and the temperature on the hood is particularly high. High temperatures are harmful to the car paint and interior. Prolonged exposure to high temperatures can cause the paint to crack or bulge, damaging the car body and accelerating the aging of the interior. 2. Precautions: Since the temperature inside the car in summer is much higher than the outdoor temperature, it is advisable not to leave flammable or explosive items in the car. If the car is parked outdoors, it is recommended to use a car cover to shield the body or a sunshade to cover the front windshield to avoid direct sunlight. Before getting into the car, always open the doors to ventilate and consider turning on the air conditioning or using water spray to cool down the interior before entering.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.