···
Log in / Register

Do I need to change the transmission oil at 60,000 kilometers?

4 Answers
DiJune
07/28/25 10:49am
Transmission oil refers to the gearbox oil. You need to check the vehicle's maintenance manual, as some cars require transmission oil changes at 60,000 kilometers while others do not. Most vehicles typically need transmission oil changes between 80,000 to 100,000 kilometers. Below are the functions of transmission oil: 1. Keeps the shifting system clean. 2. Extends the lifespan of the transmission components. 3. Provides effective lubrication even in low-temperature conditions. 4. Reduces oil loss under severe operating conditions. 5. Creates a barrier between metal surfaces to prevent direct metal-to-metal contact.
Was this review help?
17
3
Share
StJustin
08/11/25 4:16pm
To be honest, as someone who has been driving for nearly ten years, changing the transmission fluid at 60,000 kilometers is indeed crucial. Transmission fluid is like the lubricant for your car. After running for so long, it deteriorates, accumulating metal shavings and impurities. If not replaced in time, it can lead to inflexible gear shifting, transmission slippage, or even failure. My last car didn’t get the fluid changed at 60,000 km, and the transmission soon started making strange noises, costing me over 5,000 yuan to repair. I recommend checking your owner’s manual or consulting a 4S shop to decide based on your driving habits—like frequent city traffic jams or heavy towing, in which case it’s safer to change it earlier. A fluid change only costs a few hundred yuan, which is much cheaper than a major repair, and it keeps your car running smoothly and extends its lifespan. Developing a habit of regular maintenance will also give you peace of mind while driving.
Was this review help?
4
4
Share
Expand All
DiBraxton
09/28/25 5:05am
As an everyday driver, I believe changing the transmission oil at 60,000 kilometers is a good practice. After such prolonged use, the oil inevitably degrades and thickens, affecting shift smoothness. When my car approached the 60,000 km mark, I had the transmission oil checked and replaced. After the change, the car felt noticeably more responsive with fewer jerks during gear shifts. Delaying this maintenance could lead to accelerated wear of internal transmission components, resulting in exorbitant repair costs. My advice is not to skimp on this quick task—just 20 minutes at the service shop for around 400-500 RMB. Regularly monitor shift smoothness and address any irregularities promptly to prevent minor issues from escalating. A well-maintained car ensures a more relaxed and enjoyable driving experience.
Was this review help?
5
2
Share
Expand All
VonKeegan
11/11/25 7:01am
It's time to change the transmission oil at 60,000 kilometers, in my opinion. Over time, the oil can lose its effectiveness, leading to difficult gear shifts or strange noises. Check the manual requirements; typically, it's recommended to inspect and replace the transmission oil every 60,000 kilometers. If neglected, the transmission might suddenly fail, and the repair costs can be very high. Developing a habit of regular maintenance is the way to go—it saves money and hassle.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

When will the China 6 Honda Fit be launched

The China 6 Honda Fit was launched in July 2020. Below are the relevant details about the Fit: 1. Body dimensions: The Fit has a body length of 4096mm and a wheelbase of 2530mm, maintaining a 5-door, 5-seat hatchback compact car layout, with a weight ranging from only 1058kg to 1073kg. It reaches maximum horsepower at 6600 rpm and maximum torque of 155 Nm at 4500 rpm. 2. Fuel injection method: The vehicle features a DOHC double overhead camshaft valve train structure, standard with Honda's unique i-VTEC engine technology. The engine uses 92-octane gasoline, direct fuel injection, and is constructed from aluminum alloy materials. 3. Suspension: The front suspension uses a MacPherson strut setup. The rear wheels employ a torsion beam non-independent suspension. Front brakes are ventilated disc brakes, while the rear uses drum brakes.
1
3
Share

What are the steps for removing and installing the valve cover on a BMW 523 inline 6-cylinder engine?

The steps for removing and installing the valve cover on a BMW 523 inline 6-cylinder engine are: 1. Remove the air conditioning intake cover on the left side of the engine; 2. Remove the ignition coils and fuel rail, and disconnect the wiring harness; 3. Remove the valve cover screws diagonally from the sides to the center, and use a flat-head screwdriver to pry the valve cover loose. Taking the BMW 5 Series 2012 523Li Leading model as an example: it is a mid-to-large-sized car with a body length of 5039mm, width of 1860mm, height of 1471mm, and a wheelbase of 3108mm. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension. It is equipped with a 2.5L engine model N52B25, paired with an 8-speed automatic transmission.
18
3
Share

What Are the Common Causes of Discharge Faults in Honda Civic?

Honda Civic common discharge faults are caused by: the owner's unauthorized installation of electrical appliances leading to excessive vehicle discharge current. Therefore, the first step is to check whether the vehicle has been equipped with devices such as global satellite positioning navigators, radar detectors, anti-theft devices, and car phone chargers. Taking the Civic 2021 HATCHBACK 220TURBO Manual Fun Control as an example: it is a 5-door, 5-seat hatchback equipped with a 6-speed manual transmission and a fuel tank capacity of 47L. The Civic 2021 HATCHBACK 220TURBO Manual Fun Control uses a 1.5T inline 4-cylinder engine, with a maximum torque of 226 Nm, a maximum power of 130 kW, and a top speed of 210 km/h.
20
1
Share

What Causes Engine Shaking and Exhaust Puffing?

The reasons for engine shaking and exhaust puffing include: 1. Engine misfire: The exhaust gas flow shows obvious intermittency, and the exhaust pipe shakes severely, which is largely related to ignition coil failure; 2. Overly rich fuel mixture: Mostly caused by carbon deposits, clogged filters, etc.; 3. Cold start: During a cold start, the engine lubrication effect is relatively poor, and the engine oil has poor fluidity and is more viscous, resulting in abnormal noises from mechanical wear. The car engine is the device that provides power to the car, serving as the heart of the vehicle, determining its power, fuel economy, stability, and environmental friendliness. Depending on the power source, car engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines.
7
5
Share

What is the standard tire pressure for the Nissan Qashqai?

The standard tire pressure for the Nissan Qashqai is: front wheels 2.3bar, rear wheels 2.1bar. Methods to check tire pressure include: 1. Consult 4S staff; 2. Visual inspection method; 3. Use instruments to measure tire pressure. The Nissan Qashqai is a compact SUV with body dimensions of: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, and a fuel tank capacity of 57 liters. The Qashqai is equipped with a 2.0L direct-injection naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 111kW and a maximum torque of 194Nm. It features a MacPherson strut independent front suspension and a multi-link independent rear suspension.
5
0
Share

How to Scrap and Deregister a Motorcycle That Is No Longer Available?

For a lost motorcycle, the owner can apply for deregistration by submitting a written statement along with the application. Here is the relevant information: 1. Motorcycles cannot be deregistered without being scrapped: For motor vehicles that have reached the mandatory scrapping standard set by the state, the owner must submit an application form, the vehicle registration certificate, license plate, and driving license when handing over the vehicle to a recycling company. The recycling company must confirm the vehicle and dismantle it, then issue a "Recycling Certificate for Scrapped Motor Vehicles" to the owner. 2. Scrapping mileage limits: Light two-wheeled motorcycles, light three-wheeled motorcycles, two-wheeled motorcycles, and sidecar motorcycles should be scrapped after accumulating 100,000 kilometers, while three-wheeled motorcycles should be scrapped after reaching 80,000 kilometers.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.