Do I need to bring my ID card for the simulated driving test of Subject 2?

What Causes the Increase in Engine Oil in Dongfeng Nissan X-Trail?

Engine oil increase occurs because the engine injects a large amount of gasoline during startup. Sometimes, due to excessive injection and incomplete combustion, the high pressure on the cylinder walls forces gasoline into the engine oil. Normally, gasoline evaporates once the engine reaches operating temperature. However, frequent cold starts and cold weather in northern regions can prevent the engine oil from warming up sufficiently, making it difficult for the gasoline to evaporate, leading to a continuous increase in engine oil. Here is a related introduction to engine oil increase: 1. Hazards: When the engine oil increases to a certain extent and exceeds the upper limit on the dipstick, some oil may enter the combustion chamber and participate in combustion, resulting in oil burning. Oil burning can have serious consequences, such as failure of the catalytic converter, rapid damage to the vehicle's oxygen sensors, increased carbon deposits in the combustion chamber, unstable idling, reduced acceleration power, increased fuel consumption, and excessive exhaust emissions. 2. Solutions: In low-temperature environments, perform actions like warming up the engine or driving on highways to allow the engine to reach sufficient temperature conditions, enabling the gasoline or moisture mixed into the oil to evaporate. If there is a slight increase in engine oil, try raising the engine temperature to resolve the issue. However, if the oil increase phenomenon does not improve, it is best to visit a 4S shop or a repair shop for a thorough professional inspection to identify the source of the fault, solve the oil increase problem, and ensure the engine oil can better protect the engine, creating a favorable working environment for engine operation.

20

5

Share

What is the fuel consumption per 100 kilometers of the Geely Vision?

The MIIT comprehensive fuel consumption of the Geely Vision ranges from 5.9 to 6.3L/100km. Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling a distance of 100 kilometers at a certain speed on the road. The fuel consumption per 100 kilometers is measured by manufacturers in an objective environment, where the values obtained from a dynamometer installed on the vehicle's chassis are converted into speed parameters, and then the vehicle is driven at specified speeds to calculate the fuel consumption per 100 kilometers. Below is a detailed introduction to the Geely Vision: 1. Engine: The Geely Vision is equipped with Geely's new 1.8L and 1.5L CVVT all-aluminum engines, which have full independent intellectual property rights. These engines feature strong power, low fuel consumption, and low noise, with a particularly notable power-to-weight ratio of 57.2, showcasing their excellent performance. 2. Fuel Consumption: The Geely CVVT engine adopts an internationally advanced all-plastic intake manifold design, effectively reducing intake resistance, increasing air intake, and minimizing power loss, demonstrating strong fuel economy. 3. Environmental Protection: The engine utilizes CVVT and high-atomization fuel injectors, along with a front intake and rear exhaust layout, which enhances the efficiency of the catalytic converter, reduces exhaust emissions, and achieves low tailpipe emission levels equivalent to the European STEP III standard. This design not only pursues low fuel consumption but also aims for minimal environmental impact.

4

3

Share

What Electric Vehicles Can Be Driven with an E License?

An E license permits the holder to operate ordinary two-wheeled motorcycles and the vehicles allowed by an F license. The F class license authorizes the holder to drive light motorcycles. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," a light motorcycle is defined as a motorcycle with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. Additional information is as follows: 1. A1 License: Permits driving large buses and A3, B1, B2, C1, C2, C3, C4, M. 2. A2 License: Permits driving tractors and B1, B2, C1, C2, C3, C4, M. 3. A3 License: Permits driving city buses and C1, C2, C3, C4. 4. B1 License: Permits driving medium-sized buses and C1, C2, C3, C4, M (medium-sized buses refer to those with 19 seats or fewer, such as minibuses and vans). 5. B2 License: Permits driving large trucks and C1, C2, C3, C4, M. 6. C1 License: Permits driving small cars and C2, C3 (small cars refer to passenger vehicles with 9 seats or fewer, such as sedans). 7. C2 License: Permits driving small automatic transmission cars. 8. C3 License: Permits driving low-speed trucks and C4. 9. C4 License: Permits driving three-wheeled cars. 10. C5 License: Permits driving small automatic transmission passenger cars specially designed for disabled individuals (referring to five categories of people: those with right lower limb disabilities, lower limb disabilities, hearing impairments, missing right thumbs, or missing finger tips).

13

2

Share

Is it allowed to drive without wearing a shirt?

It is not allowed to drive without wearing a shirt. Below is an introduction to civilized driving: Introduction: A qualified driver is not only reflected in proficient driving skills but more importantly should possess good driving manners, behavioral habits, and moral cultivation to ensure safe and civilized driving. Basic requirements: When driving on rainy days and passing through waterlogged roads, the vehicle should slow down to prevent water from splashing onto pedestrians on both sides of the road. When driving through areas with elderly or children, slow down and proceed only after confirming safety. Avoid sudden honking to prevent startling pedestrians and causing accidents.

19

4

Share

Can You Stop If Unable to Merge into the Acceleration Lane?

You cannot stop if unable to merge into the acceleration lane. Below is an introduction to acceleration lanes: Introduction: An acceleration lane refers to a lane provided for vehicles to accelerate before merging into high-speed traffic. The acceleration lane is the rightmost section of road after exiting the ramp, located to the right of the thick dashed line on the ground. Length Setting: The merging area of a highway includes the ramp, acceleration lane, and the associated main road section. The traffic capacity of a highway merging area differs from that of regular road sections. Both main road traffic volume and ramp traffic volume significantly impact the operational characteristics of the merging area.

1

2

Share

What does Mercedes-Benz VPC mean?

VPC stands for Value-Added Processing Center, which refers to value-added services. Non-China specification vehicles must undergo modification and installation before they can be registered domestically. Below is relevant information: 1. Vehicle-related: Mercedes-Benz is the oldest automobile manufacturer in the world, renowned for producing high-quality, high-performance luxury vehicles. It is also one of the top ten automobile companies globally. In Germany, it ranks as the largest automobile company by revenue and the second largest by sales volume. 2. Specific features: The center armrest in Mercedes-Benz vehicles typically includes a rear cup holder for placing drinks. The armrest also provides elbow support for passengers, enhancing driving and riding comfort.

13

2

Share

Do I need to bring my ID card for the simulated driving test of Subject 2?

What Causes the Increase in Engine Oil in Dongfeng Nissan X-Trail?

What is the fuel consumption per 100 kilometers of the Geely Vision?

What Electric Vehicles Can Be Driven with an E License?

Is it allowed to drive without wearing a shirt?

Can You Stop If Unable to Merge into the Acceleration Lane?

What does Mercedes-Benz VPC mean?

What should I do if I didn't swipe my ETC when exiting the highway?

What does the M gear in Corolla mean?

How to Operate Gear Shifting Correctly?

What is the fuel consumption of the Ford Territory?