Do I need to be present in person for driver's license renewal?

1 Answers
Patrick
07/29/25 5:59pm
Driver's license renewal can also be processed without the presence of the license holder, as it can be entrusted to others for handling. Within 90 days before the expiration of the driver's license, bring your ID card, driver's license, physical condition certificate, and three ID photos to the vehicle management office at the issuing location to receive and fill out the motor vehicle driver's license application form. Submit these together to process the renewal and receive the new driver's license. A driver's license, also known as a 'driving license,' is a document issued by the government's transportation department to individuals who are qualified to drive, usually in the form of a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. The driver's license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc.
Was this review help?
17
2
Share
More Forum Discussions

What Type of Vehicle is the Beetle Car?

The Beetle car is a streamlined compact passenger vehicle produced by Germany's Volkswagen in 1934 under the 'Airflow' brand. Below is an introduction to the Beetle car: 1. The Beetle car features a streamlined body design, resembling the Lincoln Zephyr streamlined compact car. 2. The radiator grille of the Beetle car is sleek and dynamic, with a distinctive spindle-shaped body when viewed from above. 3. In terms of body dimensions, the Beetle measures 4278mm in length, 1808mm in width, and 1486mm in height. 4. The Volkswagen Beetle is equipped with an improved air-cooled 700cc inline 4-cylinder engine, delivering 22 horsepower.
16
5
Share

What are the precautions and procedures for buying a used car?

1. For used cars, the following should be noted: 1. The technical performance of the vehicle: Mileage is not the main consideration (only a reference data). The most important factors are the vehicle's technical performance and overall condition, including: whether the engine has been repaired and its power performance; the condition of the chassis, especially whether the steering system has been damaged; whether the body has been involved in a collision or deformation (later repaired). 2. Engine inspection: Start the engine and listen for any abnormal sounds. Fully depress the throttle and then suddenly release it to observe if there is any shaking. If the engine can smoothly reach high RPM (or return to idle speed) without abnormal sounds, it indicates the engine is in good condition. 3. Body inspection: Check the most hidden parts of the vehicle to see if the paint here matches the exterior paint. If not, it indicates the car has undergone major repairs or was involved in a significant accident requiring extensive repairs or part replacements. Inspect the chassis for any collision marks, especially on the tie rods, steering knuckles, and frame for signs of deformation or repair. 4. Suspension system check: For small cars, press the front end down forcefully to its limit and then suddenly release it. If the front end bounces back three or four times, it indicates good condition. 2. Required procedures: Transaction fees for the vehicle sale, all valid vehicle documents (registration certificate, insurance certificate, additional vehicle fees certificate, road maintenance fees, local regulatory fees, the seller's valid ID, proof from the vehicle's registered unit, the buyer's ID card and photocopies, and photos). Fill out the "Transfer Application Form" at the local vehicle management department. It must be noted that both the original owner and the buyer must be present to complete the transfer procedures.
14
1
Share

How to resolve the 'Vehicle Previously Intruded' alert on Buick vehicles?

Buick vehicles displaying a 'previously intruded' alert may have the following scenarios and corresponding solutions: Scenario 1: Occupant pulled door handle after locking. If an occupant inside the vehicle pulls the interior door handle after the vehicle is locked, the anti-theft system may misinterpret this as an intrusion attempt. Upon starting the vehicle, the dashboard will display a 'vehicle previously intruded' alert. Solution: This type of anti-theft system alert is normal behavior and requires no special attention. Scenario 2: Anti-theft alarm system triggered. When the vehicle is locked, pulling the exterior door handle will activate the alarm system, and the event will be automatically recorded in the vehicle's computer. Upon entering and starting the vehicle, the dashboard will display a 'vehicle previously intruded' alert. Solution: After confirming no actual intrusion occurred, the driver can manually dismiss the alert on the dashboard. Scenario 3: Faulty anti-theft module. A malfunctioning anti-theft module can cause system errors, leading to false intrusion alerts. Technicians can use specialized automotive diagnostic equipment to read the module's data and determine if it's faulty. Solution: Replace the anti-theft module. For vehicles under warranty, replacement is free at authorized 4S shops. Out-of-warranty vehicles cost approximately 200-300 RMB at 4S shops or about 200 RMB at independent repair shops. Even if the dashboard alert disappears after driving, it's important to promptly diagnose the cause and clear any stored faults in the control unit to prevent future issues.
6
3
Share

How Many Keys Does the BMW 5 Series Come With?

The new energy BMW 5 Series 530 comes with 3 keys. Introduction to the BMW Brand: BMW was founded on March 7, 1916. The predecessor of BMW was an aircraft factory, initially renowned for manufacturing streamlined biplane reconnaissance aircraft. The predecessor company was named BFW, and its founder was Gustan Otto. On July 20, 1917, BFW began restructuring and was officially renamed BMW. Meaning of BMW: B.M.W. stands for Bavarian Motor Works. The colors and design of the logo are derived from the coat of arms of Bavaria, where BMW is headquartered. BMW started its business by producing aircraft engines, leading many to believe that the logo represents a rotating propeller. However, this is not the case. In fact, the blue and white symmetrical pattern is very simple—it mirrors the Bavarian state coat of arms, serving as a reminder of BMW's pure Bavarian heritage.
11
2
Share

What is the standard tire pressure?

According to the provisions and requirements of the international GBT2978-2008 standard, the standard tire pressure is 2.4-2.5bar. Reference standards for adjusting tire pressure: When the vehicle is unloaded or partially loaded, it is more appropriate to adjust the tire pressure according to the lower limit of the standard tire pressure value; when the vehicle is fully loaded, the tire pressure should be adjusted according to the upper limit of the standard tire pressure value. When the tire is new, the tire pressure should be increased by about 0.2bar according to the standard tire pressure of the car tire; for old tires, the tire pressure should be appropriately reduced according to the standard tire pressure of the car tire. If the wear is severe, the lower limit of the standard tire pressure should be followed. For comfort-type soft tires, the standard tire pressure should be appropriately increased by about 0.2bar; for performance-type hard tires, the lower limit of the standard tire pressure should be followed. Time for adjusting tire pressure: Generally, the tire pressure should be checked at least once a month, and adjustments should be made with each season. The ideal times to adjust tire pressure are November and May. In November, as winter approaches, tire pressure usually decreases and needs slight adjustment. In May, as the weather starts to warm up, it is advisable to check if the tire pressure is normal. Special attention should be paid to ensuring that the tire pressure does not exceed the standard range, and there is no need to deliberately reduce the tire pressure. If the tire is not underinflated, monthly adjustments are unnecessary.
19
0
Share

Is Brilliance BMW a Domestic Car?

Brilliance BMW is not a domestic car, but a joint venture vehicle. Below is relevant information about Brilliance BMW: Introduction: Brilliance BMW is a joint venture between Brilliance Auto and BMW, primarily producing the BMW 3 Series and 5 Series in China, with prices relatively lower than imported BMW models. Many domestic component suppliers' product quality and processing techniques are not as advanced as those abroad. The assembly lines are imported, parts are imported, and they are assembled in China. Development History: Brilliance BMW Automotive is a joint venture established on March 27, 2003, by BMW Group and Brilliance Auto to produce and sell BMW cars. Its production plant is located in Shenyang, the capital city of Liaoning Province. BMW Group and its Chinese partner each hold a 50% stake in the joint venture.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.