Do I need to be present for the annual vehicle inspection?

1 Answers
StElijah
07/29/25 12:57pm
For the annual inspection of motor vehicles, the owner does not need to be present in person. A representative can handle the process by bringing the relevant documents of the motor vehicle, including the vehicle registration certificate, compulsory traffic insurance policy, the original or a copy of the owner's ID card, and the representative's ID card, directly to the vehicle management office or the traffic management department of the public security authority. Below are two methods for the annual inspection of motor vehicles: 1. Use the mobile app "Traffic Management 12123" to handle the inspection, which is applicable to motor vehicles exempt from on-site inspection. 2. Conduct the annual inspection through the vehicle management office or the traffic management department of the public security authority, which requires visiting a vehicle inspection agency. Additional information: The annual inspection of motor vehicles can be completed up to three months in advance, whether for vehicles exempt from on-site inspection or those requiring on-site inspection. All can be completed three months ahead of time.
Was this review help?
9
5
Share
More Forum Discussions

What is the function of the P gear in an automatic transmission?

The function of the P gear in an automatic transmission is to lock the vehicle's brakes, preventing any movement of the vehicle. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Other gears in an automatic transmission include: 1. D gear, which stands for Drive; 2. R gear, which stands for Reverse; 3. L gear, which stands for Low; 4. N gear, which stands for Neutral; 5. W gear, which is used for driving in snow or rain; 6. S gear, which stands for Sport mode. The working principle of an automatic transmission is that it uses planetary gear mechanisms to shift gears automatically based on the degree of the accelerator pedal and changes in vehicle speed, allowing the driver to control the speed simply by operating the accelerator pedal.
9
3
Share

What does the W in automatic transmission mean?

Automatic transmission W refers to the snow mode. W can be used for starting on slippery surfaces, with wheel torque equivalent to second gear, preventing skidding on wet or icy roads. Automatic transmission eliminates the need for drivers to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The method for shifting gears in an automatic transmission is: 1. Press the clutch pedal all the way down to completely disengage the clutch; 2. Shift the gear to first gear. The parking steps for an automatic transmission are: 1. Press the foot brake to stop the car; 2. Shift the gear from D to N; 3. Engage the handbrake and turn off the engine; 4. Release the foot brake without turning off the power; 5. Press the foot brake again and shift the gear from N to P; 6. Release the foot brake and turn the key back; 7. Turn off the power and remove the key.
7
0
Share

How often should the transmission fluid be changed in a Jetta?

Jetta transmission fluid should be changed every 60,000 kilometers. The functions of transmission fluid are: 1. To keep the gear shifting system clean; 2. To lubricate the transmission device and prolong its lifespan. The Jetta is a compact 5-door, 5-seat SUV. Taking the Jetta VS5 as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm. The Jetta VS5 is equipped with a 1.4T turbocharged engine, with a maximum power of 110 kilowatts and a maximum torque of 250 Newton meters. It adopts a front-wheel-drive system, with a front suspension using MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
6
0
Share

How to reset the maintenance light on Fengshen AX7?

The method to reset the maintenance light on Fengshen AX7 is: 1. Turn on the ignition switch while holding down the odometer reset button for several seconds; 2. Rotate the key to turn off the engine and wait for 10 seconds to complete the reset. Taking the 2021 Fengshen AX7 Manual Zhixiang Edition as an example, it belongs to the compact SUV category with body dimensions of: length 4645mm, width 1880mm, height 1670mm, wheelbase 2715mm, and a fuel tank capacity of 61L. The 2021 Fengshen AX7 Manual Zhixiang Edition is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power speed of 5500rpm, and maximum torque speed ranging from 1800 to 4000rpm.
20
3
Share

Can a car still be driven if coolant enters the engine oil?

Coolant entering the engine oil means the car cannot be driven. The symptoms include: 1. The engine oil level will rise; 2. The oil pressure will drop; 3. Water droplets will appear on the oil filler cap; 4. Water vapor and droplets will be discharged from the exhaust pipe; 5. Oil stains will appear above the engine radiator. The functions of coolant are: 1. To prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block when the car is parked in cold weather; 2. To prevent corrosion of metal parts and aging of rubber components; 3. To reduce the formation of scale, which could block circulation pipes and affect the cooling system's heat dissipation function; 4. To prevent the engine from overheating and ensure it operates at the proper working temperature; 5. To provide lubrication for the water pump thermostat and other components.
14
0
Share

What to Do If There Is Excessive Oil in the Ford Focus Cylinder Combustion System?

Ford Focus cylinder combustion system excessive oil treatment methods are: 1. Check and clean the engine carbon deposits; 2. Check if the spark plugs are functioning normally; 3. Check if the oxygen sensor is working properly. The Ford Focus is a compact car. Taking the 2021 Ford Focus Manual Fengyue model as an example, its body dimensions are: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, and fuel tank capacity 53l. The 2021 Ford Focus Manual Fengyue model is equipped with a 1.5l naturally aspirated engine, with a maximum power of 90kw, maximum power speed of 6500rpm per minute, maximum torque of 153nm, maximum torque speed of 4500rpm per minute, matched with a 6-speed manual transmission.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.