Do I need to affix the 2020 car insurance label?

2 Answers
AliceAnn
09/06/25 6:33am
2020 car insurance labels need to be affixed. According to the 2020 new regulations, only the annual inspection label needs to be displayed. The compulsory insurance is now available as an electronic label and does not need to be affixed to the windshield. However, this new regulation is only being piloted in some areas, and other regions still require it to be displayed. 1. After the new regulations were introduced, the environmental inspection compliance label has been canceled. Only the motor vehicle inspection compliance label and the compulsory insurance label need to be displayed. The latest policy states that the annual inspection and environmental inspection labels have been merged into one. As long as the vehicle passes the annual inspection, there is no need to obtain a separate environmental label. 2. Whether the compulsory insurance label needs to be affixed depends on whether the local area has implemented the electronic policy policy. In areas where it has been implemented, the label does not need to be displayed, but in areas where it has not been implemented, it still needs to be affixed. 3. Compulsory insurance is a mandatory car insurance required by the state, and its importance is self-evident. The traffic authorities intend to abolish the paper label for compulsory insurance and are currently piloting the electronic policy policy in many areas, but it has not yet been implemented nationwide. In these pilot areas, car owners do not need to affix the compulsory insurance label to the windshield.
Was this review help?
5
5
Share
McEliana
09/18/25 6:20am
Over my decades of driving, I've dealt with plenty of insurance decal matters. Let me tell you, whether you need to display your 2020 car insurance decal depends on local regulations and its expiration status. In California, the rule is still to place it on the lower left corner of the windshield for police visibility. But if your 2020 insurance has expired, don't display it to avoid fines or even towing. I've seen many fellow drivers get into trouble for being lazy about replacing decals. The proper approach is to contact your insurer for the latest decal and affix it securely—this isn't just a legal requirement but also saves time. Regularly check your decal for damage; replace immediately if faded. Some areas now accept digital proof, but always verify with your local DMV website/app before going decal-free. On the road, safety comes first—clear insurance documentation prevents hassle during incidents. Personally, I make it a habit to replace decals annually at renewal—this good practice protects both myself and overall traffic compliance.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What does the res button on a Mercedes-Benz mean?

The res button on a Mercedes-Benz is the resume button, which is used to restore the set speed in the cruise control system. The functions of the res button are: 1. To accelerate after setting the cruise control; 2. To resume the previously set speed after temporarily canceling the cruise control by pressing the res button. Taking the Mercedes-Benz E-Class 260L as an example, it is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. The Mercedes-Benz E-Class 260L is equipped with a 1.5T turbocharged engine, delivering a maximum power of 135kW and a maximum power speed of 5800 to 6100 rpm. It adopts a rear-wheel-drive layout and features multi-link independent suspension for both front and rear wheels.
18
4
Share

What is the reason for the abnormal noise when stepping on the accelerator of Audi Q5?

Audi Q5's abnormal noise when stepping on the accelerator can be divided into engine noise or transmission noise. Transmission noise is caused by faulty constant-mesh gear shafts or insufficient transmission oil, while engine noise is due to excessive wear of parts. Engine noise symptoms description: There are many possibilities for abnormal noise in the engine compartment. Most people judge the noise source to be from the engine compartment, usually a sharp metal sound or a wind-like noise. Solution: Engine noise indicates that the technical state of a certain mechanism in the engine has changed. It is mainly caused by excessive wear of some parts or improper assembly and adjustment. Some noises can even predict potential catastrophic damage to the engine. Therefore, when engine noise occurs, it should be repaired promptly to prevent the fault from expanding. If the noise is from inside the engine, the owner cannot resolve it themselves and it is best to send it to a factory for inspection and repair. Transmission noise symptoms description: If there is abnormal noise inside the transmission while driving, but it disappears when the clutch or accelerator is pressed, and it occurs during gear shifting. Solution: The transmission has many parts, and the causes of noise are relatively complex. When analyzing and judging, pay attention to: whether it is related to a specific speed, such as some planetary gears being more noticeable at around 50Km/h; whether it is related to certain gears, which is very important for judging transmission faults. If a certain gear makes noise, it is definitely related to the parts affecting that gear's transmission; if all gears make noise, it is often due to faulty constant-mesh gear shafts or insufficient transmission oil; whether it is related to specific actions, such as shifting gears, starting, rapid acceleration, rapid deceleration, turning, etc., which are effective means for judging abnormal noise. Among them, changing speed and direction are particularly important for determining rear axle faults. If the transmission noise is obvious, it is recommended to send it to a professional repair shop to identify the faulty part and then replace it.
11
0
Share

Where is the Sunny's air conditioning filter located?

The Sunny's air conditioning filter is located above the left foot position of the front passenger seat, with a white cover on the right side serving as the air filter housing. The functions of the air conditioning filter are: 1. To filter air entering the cabin from outside, improving air cleanliness; 2. To provide a comfortable environment for occupants and protect their health. Taking the 2016 Sunny as an example, its body dimensions are: length 4456mm, width 1696mm, height 1514mm, wheelbase 2600mm, and minimum ground clearance 116mm. The 2016 Sunny is equipped with a 1.5L naturally aspirated engine delivering maximum power of 82kW and maximum torque of 139Nm, paired with a CVT transmission.
16
0
Share

How to reset the maintenance light on a Zotye T700?

To reset the maintenance light on a Zotye T700, follow these steps: 1. Turn off the ignition switch; 2. Press and hold both buttons on the instrument panel; 3. Turn the key to the position where all dashboard lights illuminate; 4. Wait until the wrench indicator light turns off, then release the two buttons (including the mileage reset button); 5. Turn off the ignition switch and restart the vehicle to complete the maintenance light reset. Taking the 2018 Zotye T700 DCT Custom Edition as an example, it belongs to the mid-size SUV category with dimensions: length 4748mm, width 1933mm, height 1697mm, wheelbase 2850mm, and minimum ground clearance of 165mm.
19
1
Share

What is the function of a car air conditioning refrigeration system?

The function of a car air conditioning refrigeration system is to lower the temperature inside the vehicle compartment, maintaining a comfortable temperature environment. Car air conditioning, also known as the car air regulation device, is used to adjust and control the temperature, humidity, air cleanliness, and airflow within the vehicle compartment to an optimal state. The roles of car air conditioning are: 1. To adjust and control the temperature, humidity, air cleanliness, and airflow inside the vehicle compartment to a better state; 2. To provide a comfortable riding environment for passengers; 3. To reduce travel fatigue and create good working conditions for the driver; 4. To ensure safe driving.
8
0
Share

What do the letter grades on tires represent?

Tire letter grades represent the following: 1. J stands for 100 kilometers per hour; 2. K stands for 110 kilometers per hour; 3. L stands for 120 kilometers per hour; 4. M stands for 130 kilometers per hour; 5. N stands for 140 kilometers per hour; 6. P stands for 150 kilometers per hour; 7. Q stands for 160 kilometers per hour; 8. R stands for 170 kilometers per hour; 9. S stands for 180 kilometers per hour. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. Mounted on metal rims, they support the vehicle body, cushion external impacts, maintain contact with the road surface, and ensure the vehicle's driving performance.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.