Do dual-engine cars get blue or green license plates?

1 Answers
SanBrandon
07/29/25 6:43pm
Dual-engine cars require blue license plates. Vehicles that do not require external charging need to use blue plates. Introduction to green license plates: Green license plates represent new energy vehicles, which are used to distinguish them from traditional fuel-powered vehicles. After all, some cities now implement traffic restriction policies, but new energy vehicles are exempt. This makes it easy to distinguish between new energy vehicles and fuel-powered vehicles at a glance based on their license plates. Green background with black characters: Small new energy vehicle license plates use gradient green as the background color, while large new energy vehicle license plates use a combination of yellow and green as the background color. The number of digits increases from the usual five to six.
Was this review help?
5
0
Share
More Forum Discussions

Why Are Second-Hand Roewe 550 So Cheap?

Because the second-hand Roewe 550 itself is not expensive, it has little value in the used car market. Here is an introduction to the relevant content: 1. Space: The body dimensions of this model are 4648mm, 1827mm, and 1483mm. In terms of interior space layout and various spatial needs, this car belongs to the upper-middle level of A-class sedans. However, such space is only what a sedan can offer. If space is your primary concern, various second-hand MPV models would be the best choice. 2. Configuration: As an image of a domestic high-end brand, this car has certain advantages in configuration, but compared to today's consumer market, it has fallen far behind. However, it does have some merits. From the perspective of safety configurations, even the lowest trim version of this car comes with practical safety features such as tire pressure monitoring.
7
5
Share

What is traffic violation code 10391 and how is it penalized?

Traffic violation code 10391 refers to the illegal temporary parking of a motor vehicle where the driver is not present on site, resulting in a fine of 200 RMB without any demerit points. Traffic violation codes consist of four digits, classified according to the general principles of traffic regulations, arranged from left to right as: one-digit behavior classification code, one-digit demerit point classification code, and two-digit sequential code. Article 90 of the Road Traffic Safety Law stipulates that motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined not less than 20 RMB but not more than 200 RMB. Where this Law provides otherwise, penalties shall be imposed in accordance with the relevant provisions. Violating temporary parking regulations with the driver not present can lead to serious casualties in emergency situations due to delays in the arrival of rescue vehicles or fire trucks. Therefore, it is essential to strictly comply with motor vehicle parking regulations. There are four common methods to check motor vehicle violations: Visit the service halls of traffic police branches in various districts and counties to inquire via touch-screen terminals. Log in to the external service websites of the public security traffic management bureaus of municipal public security bureaus, locate the vehicle violation inquiry section, enter the license plate number and vehicle engine number, and click to inquire. Make a phone call (area code + 114) to inquire. Use a mobile phone with Android 12 or above to check through the Traffic Management 12123 (V2.8.1B274) client. For violations of temporary parking regulations where the driver is not present, you can handle the matter via the Traffic Management 12123 (V2.8.1B274) client on a mobile phone with Android 12 or above. After logging into the 12123 (V2.8.1B274) APP, select the illegal handling business process, proceed with the handling, and make the payment.
2
4
Share

How many seconds does the GSX250 take to accelerate from 0 to 100 km/h?

According to official data, the Lexus GSX250 2.0L model takes 8.6 seconds to accelerate from 0 to 100 km/h. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the BMW 5 Series has a maximum torque of 290 Nm and accelerates from 0 to 100 km/h in 7.8 seconds. The Lexus GSX250 2.0L model has a torque of 253 Nm and takes 8.6 seconds for the same acceleration. Transmission efficiency: The transmission acts as a medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Lexus GSX250 is equipped with an automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. For instance, the BMW 5 Series has a power-to-weight ratio of 106 Hp/T and accelerates from 0 to 100 km/h in 7.8 seconds. The Lexus GSX250 has a power-to-weight ratio of 126 Hp/T and takes 8.6 seconds for the same acceleration.
10
5
Share

Must I Wear Glasses in Driver's License Photo If I'm Nearsighted?

Nearsighted individuals must wear glasses in their driver's license photo. Daily driving precautions are as follows: 1. Carry emergency supplies: Equip your vehicle with essential emergency items such as a rescue hammer, fire extinguisher, and first aid kit. This not only enhances your sense of security while driving but also enables self-rescue or assistance to others in case of emergencies, serving as an excellent safety measure. 2. Check vehicle condition: Always inspect various vehicle components before driving, including tires, lights, and fluids, and address any issues promptly. After driving on highways for more than two hours, take advantage of rest stops to examine key vehicle parts like tires, tire pressure, and engine oil. 3. Never reverse or make U-turns on highways: Many rear-end collisions on highways occur due to unfamiliar roads, low-speed driving, reversing, or sudden stops. Plan your route in advance, preferably using navigation, and pay attention to road signs. Typically, exit reminders appear about 2 kilometers before the exit. If you miss your exit, never reverse or make a U-turn; instead, continue to the next exit and adjust your route accordingly. 4. Avoid discarding trash out the window: At high speeds on highways, even a lightweight plastic bottle flying out from the car ahead can shatter the windshield of the following vehicle. Therefore, littering on highways not only pollutes the environment but can also lead to severe accidents causing vehicle damage and fatalities.
16
4
Share

How to Replace the Bulb on a Sagitar?

The method for replacing the bulb on a Sagitar is as follows: 1. Open the car's hood. There is a plastic screw securing the headlight at the back. Use a T25 Torx wrench to unscrew this screw in sequence; 2. Unscrew the locking screw on the other side of the headlight as well; 3. Locate a metal hook on the inner side of the headlight and pull it outward until it reaches the end, revealing the headlight; 4. Follow the same method to pull out the metal hook on the inner side of the other headlight and remove it; 5. After removing the headlight, feel below the connector with your hand to find the clip securing the headlight wiring harness. Press the clip to remove the wiring harness. The clip is similar to a computer power connector and can be easily detached; 6. The central fixed guide rail is used to slide the headlight in or out. The metal hook on the right is the locking mechanism. Pull it out to release the headlight, and push it in to lock the headlight; 7. After replacing the new bulb, reinstall it in the reverse order of removal, working from back to front. The Sagitar is a car launched by FAW-Volkswagen. Since its debut, it has showcased the essence of Volkswagen's German design with its smooth lines and dynamic proportions. With its exquisite craftsmanship, rigorous manufacturing, and leading technology, it has won the affection of users.
13
5
Share

How many types of car tire pressure monitoring are there?

There are 3 types of car tire pressure monitoring: Indirect WSB, Direct PSB, and Composite TPMS. The function of car tire pressure monitoring is to automatically monitor tire pressure in real-time during vehicle operation, and to alert for tire leaks and low pressure to ensure driving safety. The car tire pressure monitoring system is a set of initialization systems designed specifically for vehicle manufacturers, utilizing wireless RF technology to quickly activate, identify, and locate various TPMS sensors, and writing relevant information into the vehicle's ECU electronic control unit through the OBDII interface, ultimately achieving the initialization of the tire pressure monitoring system.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.