Do China VI Cars Have Particulate Filters?

3 Answers
CadenFitz
07/29/25 6:10am
China VI cars have particulate filters. Function of particulate filters: Particulate filters can reduce soot produced by diesel engines by more than 90%. The captured particulate emissions are subsequently burned off during vehicle operation. Application technology of particulate filters: Particulate filters utilize advanced electronic control systems, catalytic coatings, and fuel-additive catalysts. Principle of particulate filters: Diesel particulate filters are coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by diesel engines enters the exhaust particulate trap through a dedicated pipeline. After passing through the densely arranged bag-type filters inside, the carbon soot particles are adsorbed onto the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites and burns, converting the adsorbed carbon soot particles into harmless carbon dioxide that is then released.
Was this review help?
10
1
Share
LeAmara
08/12/25 9:15pm
Bro, most China VI standard cars are equipped with particulate filters. I noticed this when driving my own China VI car. This thing is designed to reduce small particulate pollutants in exhaust emissions, making it both eco-friendly and practical. Last month during maintenance, the technician specifically reminded me to watch out for clogging, otherwise the car's power could be affected or even trigger a warning. China VI is introduced under the country's strict emission regulations. Gasoline cars commonly use GPF while diesel ones use DPF – basically standard equipment for new cars now. Without it, emissions would exceed limits and fail annual inspections. When driving normally, avoid frequent short trips. Running on highways allows the system to automatically clean and maintain it, which saves a lot of hassle. Before buying a car, check the configuration sheet or directly ask the salesperson to confirm its presence to avoid regrets. Additionally, China VI cars are generally more environmentally friendly, improving urban air quality – a benefit for everyone. Of course, the cost is slightly higher but worth it.
Was this review help?
10
0
Share
Expand All
MacBenjamin
10/04/25 2:17am
From a technical perspective, China VI-compliant passenger cars are generally equipped with a particulate filter—GPF for gasoline models and DPF for diesel models—which functions similarly to a sieve to trap harmful particulate matter and meet stringent emission standards. The principle involves capturing particles as exhaust gases pass through, preventing air pollution. However, prolonged use may lead to clogging, affecting performance. Owners should refer to the manual for regular maintenance and avoid excessive low-temperature, short-distance driving. Most brands have made this device standard after the implementation of China VI, as older standards could not meet the new requirements. If you notice a drop in power or a warning light while driving daily, inspect it promptly to avoid increased fuel consumption and damage to other components. The nationwide adoption of China VI aims at environmental protection, so choosing a vehicle with a particulate filter is advisable—just remember to use genuine fuel and perform proper maintenance for convenience.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

How to adjust the clock mode on the XRV dashboard?

Steps for models with a color audio display system: 1. Press the MENU/CLOCK button. 2. Press the (LIST/PUSH/SELECT) button to enter the clock adjustment interface. 3. Rotate the (LIST/PUSH/SELECT) knob left or right to adjust the hour and minute. 4. Finally, select confirm to set the time. Steps for models with a smart screen connectivity system: 1. Select the HOME icon, then choose settings. 2. Select System - Clock - Clock Adjustment. 3. Choose to adjust the hour and minute. 4. Finally, select confirm to set the time.
16
5
Share

Is it harmful if the car chassis is soaked in water?

If a vehicle is submerged in water, it can damage the engine and electrical systems. Generally, if the water level is below the air intake, there is no harm, but if it rises above, damage may occur. Below is an introduction to car wading-related content: 1. Effects: Driving through water may cause the car engine to stall and may also damage the electronic systems in the car. 2. Damage: If the electronic systems are damaged, it will affect the normal operation of the car. Driving through water can also cause rust on the car chassis. If water is sucked into the engine while driving through water, the engine will stall. If the electronic systems are damaged, they need to be replaced immediately; otherwise, it will affect the normal operation of the car.
15
3
Share

Does the Wuling Hongguang Mini have one or two reverse lights?

Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
14
5
Share

Does replacing the oil temperature sensor require removing the transmission?

Replacing the oil temperature sensor does require removing the transmission. The transmission oil temperature sensor is installed on the valve plate inside the transmission oil pan. Its main function is to detect the temperature of the automatic transmission hydraulic oil. When removing the transmission, be careful not to pull hard on the wiring harness on the valve plate. The testing method for the oil temperature sensor is as follows: 1. Measure the resistance value of the oil temperature sensor: Remove the transmission oil temperature sensor, place the sensor in a beaker filled with water, heat the water in the beaker, and measure the resistance between the two terminals of the sensor at different temperatures. 2. Standard resistance value for the sensor: Compare the measured resistance value with the specified value. If the resistance value differs significantly from the specified value, it should be replaced.
8
4
Share

How often should the CVT transmission fluid be changed in the Nissan Qashqai?

Nissan Qashqai CVT transmission fluid generally needs to be replaced every 80,000 to 100,000 kilometers or every 5 to 6 years. Symptoms of deteriorated transmission fluid in the Nissan Qashqai: 1. Slipping: The engine speed increases, and slipping occurs under high-torque conditions such as uphill driving. 2. Oil leakage: Poor sealing of the transmission, possibly due to issues with gaskets or seals. 3. Jerking: The main cause may be deteriorated transmission fluid containing dirt or impurities. 4. Abnormal noises: Excessive debris or impurities in the transmission fluid. 5. Overheating: The dashboard will display a transmission fault warning light. 6. Stalling: The engine stalls when shifting from P to D gear. Possible failures include the solenoid valve, lock-up control valve, or input shaft speed sensor.
4
3
Share

Where to Get a Car Natural Gas Tank Inspection?

Local Special Equipment Inspection and Research Institute (Special Inspection Institute) gas tank inspection stations conduct cylinder inspections. Here are the relevant details: 1. Material Proof: For inspection, you need to bring the gas tank usage registration certificate from the oil-to-gas conversion, the gas tank factory qualification certificate, the gas tank installation supervision inspection certificate, the vehicle's driving license, and the owner's ID card to the Special Inspection Institute for inspection. For details, you can inquire by calling the local Special Inspection Institute. 2. Pressure Equipment: A gas tank is a type of pressure equipment with explosion hazards, and its contained medium is generally flammable, explosive, toxic, highly corrosive, etc. Its usage environment, due to characteristics like mobility, repeated refilling, non-fixed operators, and changing usage conditions, makes it more complex and harsh compared to other pressure vessels.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.