Do China IV vehicles have three-way catalytic converters?

3 Answers
AnaAnn
07/29/25 12:22am
China IV vehicles are equipped with three-way catalytic converters. Here are the specific details: 1. Three-way catalytic converter: The three-way catalytic converter is the most important external purification device installed in a vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. When high-temperature exhaust gases pass through the purification device. 2. Principle: When high-temperature exhaust gases pass through the purification device, the purifying agents in the three-way catalytic converter enhance the activity of CO, HC, and NOx gases, promoting certain oxidation-reduction chemical reactions, where CO oxidizes at high temperatures to become colorless.
Was this review help?
2
1
Share
EmersynLynn
08/12/25 3:32am
I'm a long-time car enthusiast who has owned several China IV vehicles, and I can confirm they all came equipped with three-way catalytic converters. The China IV emission standards were fully implemented around 2010 in China, with a key focus on reducing pollutants like nitrogen oxides and hydrocarbons – the three-way catalytic converter being the core component. It functions like a filter installed in the exhaust pipe, converting harmful gases into harmless substances. If you're buying a used China IV car, make sure to pass the tailpipe emission test to ensure the TWC isn't clogged or damaged, otherwise it will affect environmental performance and annual inspection pass rates. Maintenance is simple: regular checks, avoiding low-quality fuel, and preventing carbon buildup. Some China III vehicles also began incorporating TWCs, but China IV strengthened the standards; China V and VI adopted more advanced systems. Ensuring your car is properly equipped helps reduce air pollution and extends engine life. Don't believe rumors claiming China IV cars lack them – my personal experience proves their existence was a critical step.
Was this review help?
15
4
Share
Expand All
LaSarah
10/01/25 7:21am
As a mechanic with years of experience, I can confirm that China IV vehicles are definitely equipped with three-way catalytic converters (TWC). I frequently handle customer vehicles and encounter many emission-related issues, with the root cause often being TWC failure. The China IV emission standards require treatment of three types of pollutants, so the TWC must be integrated into the system. During maintenance, first use professional diagnostic tools to scan for trouble codes to confirm whether it's clogged or damaged. If there's a strong exhaust odor or the check engine light is on, it may indicate the TWC needs cleaning or replacement. Compared to older models, China IV TWCs are designed to be more durable but come at a higher cost. I recommend owners inspect the exhaust pipe and TWC connections every two years, and use genuine replacement parts to avoid safety hazards. China III vehicles also have TWCs, but China IV models improved efficiency and reliability; China V vehicles adopted more complex components. Timely repairs can prevent more serious problems.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

Where is the Subaru BRZ's cabin air filter located?

Subaru BRZ's cabin air filter is located inside the glove compartment in front of the passenger seat. The steps to replace the cabin air filter are as follows: 1. Open the glove compartment in front of the passenger seat and remove all items inside. 2. Press the plastic clips on both sides inside the glove compartment, then remove the plastic cover of the glove compartment. 3. After removing the plastic cover, you will see the cabin air filter. 4. Replace it with a new cabin air filter, then reassemble the glove compartment plastic cover in reverse order of disassembly. This completes the process of replacing the Subaru BRZ's cabin air filter.
20
2
Share

How many liters of engine oil should be added to a BMW X4?

BMW X3 requires approximately 4.8 liters of engine oil. Below are specific details about the BMW X3: 1. Model: The BMW X3 is an SUV model with distinctive characteristics, introducing the new SUV Sports Activity Vehicle concept and equipped with BMW's patented xDrive intelligent all-wheel-drive system. 2. Design Philosophy: The BMW X3 combines the unique proportions of a Sports Activity Vehicle with classic and innovative design elements, featuring a fresh and youthful exterior while emphasizing the robust and powerful design traits of the BMW brand. 3. Interior Space: The BMW X3's interior can accommodate five people, along with ample luggage or sports equipment, providing greater convenience for your travels. The BMW X3 is the latest model in its series.
13
3
Share

What Causes Both the Anti-Slip and ABS Lights to Illuminate?

The reasons for both the anti-slip and ABS lights illuminating include wheel speed sensor failure, wheel speed sensor circuit failure, and ABS pump failure. Wheel Speed Sensor Failure: Use an automotive diagnostic computer to read the data stream of the wheel speed sensor and analyze whether the sensor's data matches the actual data to confirm this fault. If the wheel speed sensor fails, it cannot transmit correct data to the ABS pump, causing both the ABS and anti-slip lights to illuminate. The solution is to replace the wheel speed sensor, which is free of charge at authorized 4S shops during the warranty period. Wheel Speed Sensor Circuit Failure: A technician can lift the vehicle with a lift and inspect the wheel speed sensor's connecting circuit for damage, deformation, or loose plugs to confirm this fault. If the wheel speed sensor circuit fails, the sensor cannot function, leading to the illumination of both the ABS and anti-slip lights. The solution is to repair the circuit. If not caused by human factors, the repair is free of charge at authorized 4S shops during the warranty period. ABS Pump Failure: Use an automotive diagnostic computer to read the ABS pump's data stream and analyze whether its working state is normal. Then, use a multimeter to measure the ABS pump's resistance value and check if it falls within the normal range. If the resistance value is outside the normal range, this fault can be confirmed. ABS pump failure renders the ABS system unusable, causing both the ABS and anti-slip lights to illuminate. The solution is to replace the ABS pump, which is free of charge at authorized 4S shops during the warranty period.
9
5
Share

How to Reset the Maintenance Reminder on a Volkswagen?

Volkswagen maintenance light reset method is as follows: 1. First, turn off the car's ignition, then press and hold the 0.0/SET button on the right side of the dashboard with your left hand. 2. While holding the "SET" button, turn on the ignition. 3. Then release the "SET" button and press it once more. 4. Finally, turn off the ignition and then turn it back on to complete the maintenance reminder reset. Additional information: 1. During every routine car maintenance, the oil filter must be replaced. 2. Under normal usage conditions, brake pads can last 30,000-40,000 kilometers, and the original battery can last 3-4 years.
2
3
Share

Where is the Yaris water temperature gauge?

The Yaris's water temperature gauge is located on the instrument panel, represented by a thermometer-like symbol. Below are relevant details: 1. The water temperature gauge indicates the temperature of the engine coolant and also serves as an indicator of the engine's temperature. 2. The coolant's function is to cool the engine. Therefore, if the water temperature is too high, the engine cannot operate normally, while excessively low water temperature is a significant factor contributing to high fuel consumption. 3. Antifreeze not only provides freeze protection and cooling effects but also helps maintain the engine's temperature. Generally, a water temperature around 80 degrees Celsius is considered normal, slightly lower in winter. If the water temperature exceeds 90 degrees Celsius and does not decrease, it is essential to stop the vehicle immediately, turn off the engine, and conduct an inspection.
3
0
Share

How often should the coolant be replaced in a new Jetta?

The coolant in a new Jetta should be replaced every two years or 30,000 kilometers. The coolant replacement procedure is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way water pipe. The coolant flows through the five-way pipe and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, replace the water pipe or re-secure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add water to the coolant reservoir and continue filling until clean water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink tint. Continue adding clean water until the outflow is clear. Note: Remember to disconnect the heater hose and drain the water from the heater core. About an hour after draining, add new coolant through the radiator hose. Then, pour another container of coolant into the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Add more coolant until it reaches the "MAXT" mark on the reservoir.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.