Do Cars Need Antifreeze?

1 Answers
StHolden
07/24/25 6:58pm
Cars do need antifreeze. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year. How to Replace Antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a special focus on the five-way hose. Antifreeze is distributed to different parts of the car to function after flowing through the five-way hose. If there is any leakage of antifreeze in this part, replace the hose or resecure the connection as needed. Drain the old antifreeze and then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir and continue to fill it until the water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may have a faint pink color. Keep adding clean water until the water coming out is clear. Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new antifreeze through the radiator hose. Then, pour another bottle of antifreeze into the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop. Add more antifreeze until it reaches the maximum mark "MAXT" on the reservoir.
Was this review help?
14
3
Share
More Forum Discussions

Where is the engine number located on the JAC Refine?

JAC Refine's engine number is located on the cast iron cylinder block near the fan wheel, below the right exhaust manifold. It is a rectangular plane on the cylinder block with stamped engine numbers. Similar to the car's VIN, the engine number is unique. Different manufacturers may have varying arrangements and contents in the engine number, but it generally includes the engine model, production date, and a randomly assigned serial number when the engine comes off the production line. The JAC Refine is a model that falls between a minivan and an MPV. In terms of body dimensions, the JAC Refine measures 5255mm in length, 1850mm in width, and 1970mm in height.
10
4
Share

What does the B gear in Corolla mean?

Corolla B gear refers to engine braking. The B gear on a car is a rarely seen gear position, which is generally found on Japanese cars. Taking the 2021 Corolla as an example, it belongs to the compact car category with body dimensions of: length 4635mm, width 1780mm, height 1455mm, wheelbase of 2700mm, fuel tank capacity of 50L, and trunk capacity of 470L. The 2021 Corolla features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 185Nm, paired with a 10-speed continuously variable transmission.
6
5
Share

Does Lamborghini Have Four-Seater Models?

Lamborghini does offer four-seater models. Taking the Lamborghini Asterion as an example, here are its specific details: 1. Powertrain: It features a plug-in hybrid drivetrain. The system combines a 610-horsepower (449 kW) V10 5.2-liter naturally aspirated engine derived from the Huracan with three electric motors and a 7-speed DSG transmission, delivering a combined electric motor output of 300 horsepower (220 kW). 2. Tires: The Asterion is equipped with 20-inch (front) and 21-inch (rear) carbon fiber wheels paired with Pirelli tires.
12
5
Share

How to reset the wrench warning light on JAC Refine S3?

JAC Refine S3 wrench warning light reset method: 1. Turn off the ignition, press and hold the dashboard adjustment button while turning the key to the ON position until all dashboard lights illuminate, then hold for 3-5 seconds; 2. Take the vehicle for maintenance - the wrench symbol indicates maintenance is due. The JAC Refine S3 is a 5-door, 5-seat compact SUV with exterior dimensions of 4345mm (length) × 1765mm (width) × 1640mm (height) and a 2560mm wheelbase. It is powered by a 1.5L naturally aspirated engine paired with a 6-speed manual transmission, delivering maximum power of 85kW and peak torque of 150Nm. The vehicle features front-wheel drive with MacPherson strut front suspension and torsion beam rear suspension.
7
4
Share

What Causes a Car's Brakes to Feel Soft and Weak?

Soft and weak car brakes may be caused by excessive brake pad wear, insufficient brake fluid, or clogged brake lines. If you experience soft and weak brakes while driving, it is crucial to stop and inspect the vehicle immediately to prevent potential safety hazards. The following are the functions of the braking system: 1. Service Brake: During driving, the service brake (foot brake) is typically used to slow down or stop the car within the shortest distance possible; it also helps maintain stable speed when driving downhill. 2. Parking Brake: The parking brake not only keeps the car stationary but can also serve as an alternative if the service brake fails. Once the car is parked, the parking brake (handbrake) should be engaged to prevent the vehicle from rolling forward or backward.
12
0
Share

What is the method for replacing shock absorbers?

The method for replacing shock absorbers: 1. Remove the car tire, loosen the wheel hub nuts with the onboard tools, lift the front wheel of the car, and then remove the wheel hub nuts; 2. Place one end of the open-end wrench on the external hex head of the bolt and the other end on the nut, then remove the fixing nut connecting the shock absorber to the lower stabilizer bar; 3. Open the car hood, remove the three fixing nuts at the top of the shock absorber tower, and then take the shock absorber off the suspension for replacement. To quickly dampen the vibration between the frame and the body and improve the smoothness and comfort of the car, shock absorbers are generally installed on the car suspension system.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.