Do brake pads need to be replaced at 60,000 kilometers?

1 Answers
MasonFitz
07/29/25 11:28pm
Brake pads need to be replaced at 60,000 kilometers. The method for replacing brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install new brake pads and tighten the guide bolts. The working principle of brake pads is to use the friction between the brake pads and the brake drum, as well as between the tires and the ground, to convert the kinetic energy of the moving vehicle into heat energy after friction, thereby stopping the vehicle. The materials of brake pads are: 1. Asbestos, cellulose, sintered glass; 2. Carbon fiber friction material; 3. Powder metallurgy friction material; 4. Semi-metallic friction material.
Was this review help?
14
2
Share
More Forum Discussions

What is the 0-100 km/h acceleration time of the MG5?

According to official data, the MG5 comes in two engine displacements: 1.5T and 1.5L. The 1.5T model achieves a 0-100 km/h acceleration time of 7.9 seconds, while the 1.5L model takes approximately 9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the strength of the force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The MG6 has a maximum torque of 285 Nm and a 0-100 km/h acceleration time of 6.6 seconds. The MG5 has a maximum torque of 150 Nm and a 0-100 km/h acceleration time of 7.9 seconds. Transmission efficiency: The transmission serves as the medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The MG5 is equipped with a 5-speed manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The MG6 has a power-to-weight ratio of 135 Hp/T and a 0-100 km/h acceleration time of 6.6 seconds. The MG5 has a power-to-weight ratio of 99 Hp/T and a 0-100 km/h acceleration time of 7.9 seconds.
3
0
Share

What is the fuel tank capacity of the Mercedes-Benz C200L?

The fuel tank capacity of the Mercedes-Benz C200L is 66 liters, and the manufacturer recommends using 95-octane gasoline. Here is more information about car fuel tanks: 1. The fuel tank capacity varies by model, and even among different brands of the same type of vehicle, there is no unified national standard. 2. The fuel tank capacity determines the driving range; a larger tank allows for longer distances. 3. Various factors such as sediment, rust, and deformation inside the tank can affect its capacity. 4. Due to factors like road conditions and driving conditions, the remaining fuel capacity when the warning light comes on may not be exactly the same each time.
3
5
Share

Which country produces the Highlander?

The Highlander is produced in Japan. Here are some relevant details about the Highlander: 1. The Highlander is a mid-size SUV and is considered a benchmark model in its class. 2. It enjoys excellent sales and reputation in the domestic market, offering spacious interiors and outstanding reliability and durability. 3. The new Highlander is equipped with a 2.0-liter turbocharged engine paired with a 6-speed automatic transmission. 4. It features an attractive exterior design, generous cabin space, excellent practicality, smooth driving experience, and strong overall product capabilities. 5. The dimensions of the Highlander are 4890 mm in length, 1925 mm in width, 1720 mm in height, with a wheelbase of 2790 mm.
19
5
Share

What transmission does the BYD Tang use?

BYD Tang's transmission system uses a 6-speed DCT wet dual-clutch transmission, model BYD6DT35. It can be driven in either pure electric mode (EV) or hybrid mode (HEV). Below are the detailed specifications of the BYD Tang's transmission: 1. This wet dual-clutch transmission has the model number BYD6DT35, with a maximum torque capacity of 250N·m and a weight of 94kg. 2. It is a transmission independently developed by BYD. 3. Since the dual-clutch transmission is based on a manual transmission, it can operate in either manual or automatic shifting mode.
2
0
Share

Where is the drainage hole of the Citroen C-Quatre door?

The drainage hole of the Citroen C-Quatre door is located inside the door's anti-scratch strip, and the strip needs to be opened for cleaning. By lifting both ends of the door's anti-scratch strip, you will see two black tapes covering the door's drainage holes, with two drainage holes per door. Here is more information about poor vehicle drainage: 1. When the vehicle has poor drainage, it is necessary to determine which drainage hole or pipe is blocked based on the location of the accumulated water. For example, if there are water stains near the roof or sunroof, the problem is likely from the sunroof. 2. After identifying the drainage hole, debris near the drainage outlet needs to be cleaned. 3. It is important to note that when cleaning hidden hoses such as those in the sunroof, hard objects like iron wires should not be used for unclogging, as they can cause the hoses to break or detach.
2
0
Share

How to Open the Hood of a Mercedes-Benz E300?

Here is how to open the hood of a Mercedes-Benz E300: 1. The hood release switch is located inside the vehicle and needs to be manually activated. The switch is positioned around the foot pedals. 2. There is a button on the left side of the foot pedals; pressing this button will release the outer hood. 3. Place the hydraulic strut into the designated slot on the hood to support it. Below are the functions of the engine hood: 1. Protects the engine and surrounding components: The area under the hood houses critical parts of the vehicle, including the engine, electrical circuits, fuel lines, transmission system, and more. These components are vital for the vehicle's operation. Enhancing the strength and structure of the hood helps shield against impacts, corrosion, rain, and electrical interference, ensuring the vehicle runs smoothly. 2. Aesthetic appeal: The exterior design of a vehicle is a direct reflection of its value. As a key part of the overall appearance, the hood plays a significant role in enhancing visual appeal and embodying the vehicle's design philosophy. 3. Assists in driving visibility: During driving, the reflection of natural light and alignment markers are crucial for the driver to accurately assess road conditions and obstacles ahead. The hood's design can effectively adjust the direction and pattern of reflected light, minimizing glare and improving driver visibility.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.