Do Blue License Plate Refrigerated Trucks Need to Apply for an Operating Permit?

1 Answers
CoraDella
07/29/25 4:49pm
Blue license plate refrigerated trucks need to apply for an operating permit. Below are the relevant details: Required Documents: The documents needed to apply for an operating permit for a refrigerated truck include the identity proof of the responsible person, the identity proof of the handling agent and a power of attorney; the owner's ID card, original vehicle license, and 3 vehicle photos; the driver's license and original professional qualification certificate; the vehicle registration certificate, and the refrigerated truck qualification certificate. Blue License Plate Vehicles: Blue license plate vehicles refer to cars with blue license plates, typically featuring white characters and white borders on a blue background. Small vehicle license plates have white characters and white borders on a blue background. Trucks with a total weight under 4500KG (excluding) and vehicles with a seating capacity of 20 people or fewer and a body length under 6 meters (excluding) are required to install this type of license plate.
Was this review help?
9
0
Share
More Forum Discussions

What is the fuel tank capacity of BYD?

The fuel tank capacity varies among different BYD models. For example, the BYD Song Pro has a fuel tank capacity of 63L. Here are some details about the BYD Song Pro: Exterior: It adopts the Dragon-Face 2.0 design language, with a more refined overall appearance. The LED headlights incorporate design elements like "Dragon Claw," and the large grille adds a strong visual impact. The lower bumper is relatively simple, with "L"-shaped fog lights on both sides of the bottom through-type grille. The rear design is rounded, featuring a raised ridge in the middle of the tailgate and a full-width LED light strip, creating a striking lighting effect. Powertrain: It is equipped with a 1.5TI engine paired with a 6-speed dual-clutch transmission, delivering a maximum power of 118 kW and a peak torque of 245 Nm.
9
5
Share

Why Does Water Drip from a Car's Exhaust Pipe?

Water dripping from a car's exhaust pipe is a normal phenomenon that occurs in all types of vehicles, indicating that the fuel in the engine is burning efficiently. When the ambient temperature is low, water vapor condenses into droplets on the inner walls of the exhaust pipe and flows out. In winter, when the external environment is colder, air humidity is high, and there is a significant temperature difference between the inside and outside of the engine after operation, the phenomenon of water dripping from the exhaust pipe is more common. However, excessive water discharge from the exhaust pipe is not normal. While water dripping from the exhaust pipe can reflect the car's performance, more water does not necessarily mean better performance. Excessive water in the exhaust system can damage the oxygen sensor in the catalytic converter, leading to inaccurate fuel supply to the engine and affecting its normal operation and performance. Additionally, prolonged accumulation of water droplets can accelerate corrosion of the exhaust pipe.
16
3
Share

Is It Necessary to Replace the Three-Piece Set When Changing the Timing Belt?

It is not always necessary to replace the three-piece set when changing the timing belt. In some engines, the water pump is driven by the same timing belt. If the belt has been used for a long time or is corroded, it is advisable to replace it along with the belt. However, if the water pump is independently driven and the timing belt has not reached its replacement interval, it is recommended not to replace it. The tension of the tensioner pulley should not be too low. Insufficient tension can reduce the friction between the belt and the working pulley, ultimately causing the belt to slip. Similarly, the tension should not be too high, as excessive tension increases the load on the belt, leading to belt damage and potential bearing failure in the working pulley. The tensioner pulley should generally be placed on the inner side of the slack side to ensure the belt is subjected to only one-way bending. It should also be positioned as close as possible to the large pulley to minimize the impact on the wrap angle of the small pulley. If the tensioner pulley is placed on the outer side of the slack side, it should be positioned near the small pulley. The groove dimensions of the tensioner pulley should match those of the belt pulley, and its diameter should be smaller than that of the small pulley. The timing belt is a consumable part. If it breaks, the camshaft will no longer operate in sync with the timing, which can cause severe damage due to valve and piston collision. Therefore, the timing belt must be replaced according to the mileage or time interval specified by the manufacturer. During engine operation, the four processes of intake, compression, combustion, and exhaust continuously occur in the cylinders. Each step must be precisely timed with the movement and position of the pistons to ensure coordinated intake, exhaust, and piston motion. The timing belt acts as a 'bridge' within the engine, transmitting power from the crankshaft to the corresponding components.
2
0
Share

What is the actual fuel consumption of the Camry 2.0?

Camry 2.0 has a combined fuel consumption of 5.5-5.8L/100km. Currently, there are three models of the Camry 2.0 available for sale. The Elite version has a combined fuel consumption of 5.5L/100km. The Luxury version has a combined fuel consumption of 5.7L/100km. The Sport version has a combined fuel consumption of 5.8L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.5-8.8L/100km. When driving, the following five tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and adopting slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon deposits (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if it is dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the mileage. Close the windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the more resistance the car faces, requiring more power and thus increasing fuel consumption.
1
4
Share

What is the fuel consumption of Honda 190?

Honda 190 has a combined fuel consumption of around 2.5L per 100 kilometers. Here are some precautions for motorcycle riding: Pre-departure inspection: Check the condition of the motorcycle, including the headlights, turn signals, horn, and handlebars to ensure they are functioning properly. Attire and protective gear: Helmets are legally required protective equipment, and it is advisable to wear brightly colored clothing. Follow traffic rules: Avoid racing with cars, drive safely in accordance with traffic regulations, and yield to pedestrians. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; avoid overtaking from the right or between two parallel vehicles.
2
3
Share

How long can a BMW X5 last?

There is no specific lifespan for the BMW X5, but it will be mandatorily scrapped after reaching 600,000 kilometers. The BMW X5 is equipped with two types of engines: The first is a 2.0-liter turbocharged engine. The 2.0-liter turbocharged engine of the BMW X5 delivers 265 horsepower and a maximum torque of 400 Nm. This engine reaches its maximum power at 5,000 to 6,000 rpm and its maximum torque at 1,550 to 4,500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic transmission. The second is a 3.0-liter turbocharged engine. The 3.0-liter turbocharged engine of the BMW X5 delivers 340 horsepower and a maximum torque of 450 Nm. This engine reaches its maximum power at 5,500 to 6,500 rpm and its maximum torque at 1,500 to 5,200 rpm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic transmission.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.