Do Armored Trucks Have Road Priority?

2 Answers
DelRachel
09/06/25 6:09am
No. Only when led by police vehicles do any vehicles have priority. The mnemonic for vehicle right-of-way is as follows: yield to vehicles coming from the right; turning motor vehicles yield to straight-moving motor vehicles; for vehicles traveling in opposite directions, right-turning vehicles yield to left-turning vehicles. Below is relevant knowledge about vehicle right-of-way: Police cars, fire trucks, ambulances, and engineering rescue vehicles: These vehicles may use sirens and warning lights; provided safety is ensured, they are not restricted by travel routes, directions, speeds, or traffic signals, and other vehicles and pedestrians should yield. Water trucks, sweepers, and other motor vehicles: These vehicles may disregard lane division restrictions as long as they do not impede other vehicles, but they must not drive against the flow of traffic.
Was this review help?
3
2
Share
Cooper
09/18/25 5:56am
I've been driving for over a decade and have seen quite a few armored trucks on the road. According to standard traffic regulations, armored trucks don't have special priority—they must obey traffic lights and rules just like regular trucks. You don't need to yield to them as you would for police cars or ambulances. However, many drivers still choose to give way proactively, mainly for safety reasons—these vehicles may carry valuables or armed guards, and keeping some distance can reduce accident risks. For example, at intersections or when changing lanes, I tend to slow down and leave a bit more space. This isn't required by law but rather a personal habit. Of course, if an armored truck is escorted by police vehicles, you should let it pass first—but that's a special circumstance, not an everyday occurrence. In general, just drive normally, stay calm, maintain proper distance, and stay alert.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Replace the Battery in an MG Car Remote Key?

First, remove the mechanical key, then pry open the key casing. Once opened, you will see the battery. Remove the old battery, install the new one, and then reassemble the key. Generally, the battery life of a car remote key is about 2-3 years, depending on the frequency of use. Below are some signs that the key battery is running low: 1. The remote control distance becomes very short. Previously, you could unlock the car from 5-6 meters away, but now you need to be very close to the car for it to respond. 2. The remote occasionally fails to work when unlocking the car, requiring multiple presses to unlock. 3. Pay attention to the indicator light on the key. When you press the button, the light may appear dimmer than usual or flicker, indicating it's time to replace the battery.
4
4
Share

What are the differences between the Changan Eado Value Edition and High Energy Edition?

The differences between the Changan Eado Value Edition and High Energy Edition are as follows: 1. These two configurations differ in price and features. The High Energy Edition has higher specifications than the Value Edition, which is the base model. The High Energy Edition includes additional features such as an electronic parking brake, tire pressure display, electric sunroof, keyless entry for both driver and front passenger, leather seats, adjustable steering wheel (front and rear), rear center armrest, and rear cup holders. 2. The High Energy Edition has a larger infotainment screen compared to the Value Edition. The Value Edition has a 7-inch screen, while the High Energy Edition features a 10.25-inch screen. The High Energy Edition comes with six speakers, whereas the Value Edition has two. The High Energy Edition also includes automatic headlights, heated side mirrors, and automatic climate control. Additional details: 1. The Eado is a compact family car from Changan, equipped with two engine options: a 1.4L turbocharged engine and a 1.6L naturally aspirated engine. 2. The 1.6L naturally aspirated engine delivers a maximum power of 94kW and a peak torque of 168Nm, with maximum power achieved at 5700-6200 rpm and peak torque at 4000-5000 rpm. This engine features DVVT technology and an aluminum alloy cylinder head and block. The 1.4L turbocharged engine produces a maximum power of 116kW and a peak torque of 260Nm, with maximum power at 5500 rpm and peak torque between 1500-4000 rpm. This engine also uses an aluminum alloy cylinder head and block.
20
0
Share

What to Do if the XuanYi Transmission Fails?

XuanYi transmission failure solutions include: 1. Clear the fault code; 2. Replace the valve body; 3. Repair the transmission computer, buffer plate, and clutch. The functions of the transmission are: 1. Change the transmission ratio to meet the traction needs under different driving conditions; 2. Achieve reverse driving; 3. Interrupt power transmission to the drive wheels when the engine starts, idles, shifts gears, or needs to stop for power output. Taking the 2020 XuanYi modified 1.6L XLCVT Enjoyment Edition as an example, in terms of suspension, the front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension.
3
2
Share

Why are the front and rear license plates of trailers different?

The reason why the front and rear license plates of trailers are different is: National regulations require that semi-trailers and tractor heads must be registered separately when being licensed. This means the tractor needs one registration and the semi-trailer also needs one registration, so semi-trailers use two license plate numbers. License plates also refer to vehicle registration plates, and their functions are: 1. The license plate can indicate the region to which the vehicle belongs; 2. The owner of the vehicle and the vehicle's registration information can be traced based on the license plate. The method for installing a license plate is: 1. Align the license plate with the fixing points on the vehicle and ensure it is straight and properly aligned; 2. Insert the screw rods into the holes of the vehicle's fixing points and secure the screws with a flat-head screwdriver; 3. Snap on the four screw caps in sequence.
2
0
Share

What are the steps for shifting gears in an automatic transmission?

Automatic transmission shifting steps are: locate the button on the side of the gear lever, press the button while shifting, move the gear lever to the desired position, then release it. The gear lever cannot be moved without pressing the button. The gears of an automatic transmission car are: P for parking, R for reverse, N for neutral, D for drive, L for low gear, S for sport mode, and OD for overdrive. Precautions for driving an automatic transmission car are: 1. Do not shift into P while driving; 2. After driving, the engine must be turned off and shifted into P to remove the key; 3. Do not shift into N while driving to coast; 4. When starting the vehicle in P or N, remove the gear lever from P while stepping on the brake, turn on the power and step on the brake to shift to N, and after ignition, shift to D to drive forward directly.
6
4
Share

Can a nail stuck in a tire be pulled out directly?

A nail stuck in a tire should not be pulled out directly for the following reasons: 1. The nail has already punctured the tire, and pulling it out may cause air leakage, rendering the vehicle unable to continue driving; 2. The tire pressure is high, and removing the nail could lead to a blowout. The correct approach is to drive the car slowly to a nearby repair shop, where the nail can be safely removed and the tire repaired or replaced. The functions of a tire include: 1. Transmitting driving force, braking force, and steering force to operate the vehicle; 2. Supporting the vehicle load; 3. Absorbing and reducing vibrations and impacts during driving to prevent severe vibrations from damaging vehicle components.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.