Do All New Cars Consume More Fuel?

1 Answers
OMatteo
07/24/25 5:25pm
New cars generally consume more fuel. The reason for the higher fuel consumption in new cars is quite simple—they are in the break-in period. The break-in period refers to the time when various components of the car need to adapt and work together smoothly. Since cars consist of large mechanical parts, these components need to come into contact, rub against each other, and mesh properly during driving to ensure mutual adaptation. Friction requires more energy, which in turn increases fuel consumption. New car owners should pay attention to the following points when using their vehicles: 1. Avoid excessively high engine RPM: Generally, keep it below 3,000 RPM, or below 3,500 RPM for automatic transmissions. 2. Avoid maintaining a single gear or driving in low gear for extended periods: All vehicles bear a heavier load when driving at low speeds compared to moderate speeds. Therefore, during the break-in period, avoid prolonged driving below 60 km/h. Gradually increase your speed. 3. Avoid overloading the vehicle: During the break-in period, the lighter the load, the better, as excessive weight can also damage the car.
Was this review help?
12
0
Share
More Forum Discussions

Where is the lane assist module located in the Audi A6?

The lane assist module in the Audi A6 is located on the left side of the rear bumper. Composition of the Lane Keeping Assist System: Information Collection Unit: In the lane keeping assist system, its function is similar to that of the lane departure warning system. It mainly collects lane information and the vehicle's own driving information through onboard sensors and sends it to the electronic control unit. Electronic Control Unit: It primarily processes the information through specific algorithms and determines whether to perform corresponding lane departure correction operations. The performance of this unit directly affects the timeliness of lane departure correction. Therefore, when selecting the central processing unit and designing the control algorithm, computational capability and speed should be emphasized. Execution Unit: It is mainly divided into three parts: the alarm module, steering wheel control module, and brake control module. The alarm module is similar to the lane departure warning system, implemented through one or more forms such as steering wheel or seat vibration, dashboard display, and sound alerts. The steering wheel control module and brake control module are unique to the lane keeping assist system. They mainly achieve coordinated control of lateral and longitudinal movements and ensure the vehicle maintains a certain level of driving stability during LKAS operation. Working Principle of the Lane Keeping Assist System: When the system is operating normally, the information collection unit collects data such as lane lines, vehicle speed, steering wheel angle, and vehicle speed through onboard sensors. The electronic control unit processes this information, compares the lane lines with the vehicle's driving direction, and determines whether the vehicle is deviating from the driving lane. The lane keeping assist system can be activated throughout the entire driving process or when the speed reaches a certain threshold and can be manually turned off, maintaining the vehicle's driving trajectory in real-time. When the vehicle is likely to deviate from the lane, it issues an alarm. When the distance between the vehicle and the lane line on the deviation side is less than a certain threshold or when a wheel has already deviated from the lane line, the electronic control unit calculates the auxiliary steering force and deceleration, controlling the steering wheel and brake control modules based on the degree of deviation. It applies steering force and braking force to stabilize the vehicle and return it to the normal track. If the driver turns on the turn signal for a normal lane change, the system will not issue any alerts.
12
2
Share

Should Shock Absorbers Be Replaced Individually or in Pairs?

It is recommended to replace them in pairs. Replacing just one can lead to uneven height on both sides, and the other side is also prone to damage. The function of shock absorbers is to maximize the buffering of the vehicle's center of gravity height movement and save energy, thereby reducing wind resistance and mitigating the impact of changes in the vehicle's center of gravity on the tires. Below are specific methods to check if the shock absorbers are functioning properly: 1. Oil leakage: If oil leakage is detected, it indicates a malfunction in the shock absorber, which should be replaced or repaired as needed to prevent abnormal operation. 2. Press the bumper: Press the bumper firmly and release it. If the vehicle bounces 2-3 times, it indicates that the shock absorber is working well. 3. Observe vehicle vibration: When driving slowly and applying emergency brakes, if the vehicle vibrates violently, it suggests a fault in the shock absorber. 4. Casing temperature: After driving 10km on rough road conditions, stop and touch the casing. If it is not hot enough, it indicates no internal resistance in the shock absorber, meaning it is not working.
18
5
Share

What to Do If You Forget to Bring Your Driver's License and Get Checked by Traffic Police?

If you forget to bring your driver's license while driving, the traffic police will handle it as not carrying the license, but it will not be considered as driving without a license. According to the regulations on road traffic safety laws and regulations for motor vehicle drivers, forgetting to bring the driver's license may result in a fine ranging from 20 to 200 yuan and 1 demerit point. If there are other provisions in this law, the punishment shall be in accordance with those provisions. The following methods can help avoid penalties for not carrying the driver's license: 1. Personal ID card: Carry your ID card. The traffic police have specialized equipment to check whether the driver has a license. By entering the driver's ID number into the device, the driver's information can be retrieved. 2. Copies of driver's license and vehicle license: Carry copies of your driver's license and vehicle license. 3. Electronic driver's license: Apply for an electronic driver's license if local policies allow the use of electronic licenses.
5
5
Share

What Causes the Hissing Sound During Engine Acceleration?

Engine acceleration hissing sound reasons are as follows: Engine abnormal noise: Solution: Engine abnormal noise indicates that the technical state of a certain engine mechanism has changed. It is mainly caused by excessive wear of some parts or improper assembly and adjustment. Some abnormal noises can even predict possible catastrophic engine damage. Therefore, when abnormal engine noise occurs, timely repair is necessary to prevent fault escalation. Transmission abnormal noise: Solution: The transmission has numerous components, making the causes of noise relatively complex. During analysis and diagnosis, pay attention to: Whether it's related to specific speeds - for instance, some planetary gear noises become particularly noticeable around 50Km/h. Whether it's related to certain gears - this is crucial for transmission fault diagnosis. If noise occurs in a specific gear, it's definitely related to components affecting that gear's power transmission; if all gears produce noise, it often indicates a constant-mesh gear shaft fault or insufficient transmission oil. Whether it's related to specific operations - actions like gear shifting, starting, sudden acceleration, sudden deceleration, and turning are all effective means for diagnosing abnormal noises. Among these, speed changes and direction changes are particularly important for rear axle fault determination.
19
3
Share

Where is the cigarette lighter located in the Venucia T90?

Positioned below the vehicle's air conditioning control area and in front of the gear lever. To use the cigarette lighter, first start the vehicle, then insert the lighter into the socket. It will automatically pop out after a short while, ready for lighting cigarettes. Compared to lighters, cigarette lighters offer significantly higher safety. Precautions for cigarette lighter usage: The cigarette lighter socket can be damaged by foreign objects falling into it, so owners should take care to protect it. When not in use, always reinsert the cigarette lighter. For smoking owners, the cigarette lighter is extremely convenient - simply plug and unplug to light cigarettes. However, frequent plugging/unplugging may cause issues, such as failure to lock into position when pressed or inability to heat. Spring deformation: When the heating element reaches working temperature, the retaining spring may deform due to high heat, causing the lighter to eject. If the lighter fails to stay locked when pressed, this issue can be resolved manually. Periodically check whether the socket's retaining spring has become loose. By timely adjusting the spring tension, the cigarette lighter can maintain normal operation.
11
1
Share

What is the method for deducting points from a driver's license?

Procedure for deducting points from a driver's license: The motor vehicle driver goes directly to the traffic police station to complete the formalities; the motor vehicle driver brings their ID card, driver's license, and vehicle registration certificate to the traffic police station staff, confirms that it is their own violation, and the staff prints out the penalty decision; the driver takes the penalty decision to the designated bank to pay the fine, and once the fine is paid, the violation is cleared. Below is additional information on point deduction: 1. Point clearance time: The cumulative scoring cycle for road traffic safety violations (i.e., the scoring cycle) is 12 months, with a full score of 12 points, calculated from the date the motor vehicle driver's license is first issued, and so on in a continuous cycle. The driver's license point clearance time is the issuance date on the license, and the system automatically clears the points on the issuance date each year. If the points recorded for violations in a scoring cycle do not reach 12 points, the scoring system will automatically reset the points recorded in the previous scoring cycle (after the fine is paid) at the start of the next scoring cycle. 2. If the full 12 points are recorded: The driver must go to the vehicle management office where the license was issued or to the vehicle management office where the violation occurred to participate in study and take the subject test.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.