Do 4S stores provide insurance for new cars?

What grade of gasoline is suitable for the Highlander?

The Highlander should use 95-octane gasoline. This fuel grade is recommended in the vehicle's official owner's manual. In addition to checking the appropriate gasoline grade in the owner's manual, you can also find it marked on the fuel tank cap of the Highlander. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, those between 10.0-11.5 should use 95-octane, and higher compression ratios may require 98-octane. However, with the application of new technologies, the compression ratio alone cannot determine the suitable gasoline grade, as high compression ratios can also be tuned to use lower-octane gasoline. Other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade in the Highlander only requires switching back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, manifesting as poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Due to the significantly lower octane number, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear to pistons and cylinders, and in severe cases, cylinder scoring.

8

5

Share

How many times can you retake the exam if you fail the first subject of the driving test?

There is no limit to the number of times you can take the first subject of the driving test. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," you can take the first subject exam twice on the same day. If you fail the first attempt, you can take a free second attempt. If you still fail the second attempt, the first subject exam ends, and you can only reschedule the exam after ten days. The first subject, also known as the theoretical exam or driver's theory test, is part of the motor vehicle driving license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The exam is conducted on a computer with a time limit of 45 minutes. A passing score for the first subject is 90 points. The exam consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point and a total score of 100 points. If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the exam. The content of the first subject exam includes: driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Notes for the first subject exam: Candidates should pay attention to their attire and are not allowed to wear slippers. Electronic devices and bags are not allowed in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the exam room. In the exam room, the identity verification area will assign seats. After finding your seat, start the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can retake the exam on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the first subject exam. Each subject exam can be taken once, and if you fail, you can retake it once. If you do not take the retake or fail the retake, the exam ends, and you must reschedule. For the second and third subjects, there are only five exam attempts. The second and third subject exams can be rescheduled after ten days. If you fail the third subject's safety and civilized driving knowledge exam, the passing score for the road driving skills exam remains valid. There are three subjects in the driving test: the first, second, and third subjects. The first subject refers to the road traffic safety laws, regulations, and related knowledge exam. The second subject refers to the field driving skills exam. The third subject exam consists of two parts: road driving skills and safety and civilized driving knowledge. The safety and civilized driving knowledge exam is conducted after the third subject, so it is commonly referred to as the fourth subject exam. However, in official terms (i.e., the Ministry of Public Security's Order No. 123), there is no mention of a fourth subject.

9

0

Share

Does the 2017 Corolla have Bluetooth?

2017 Corolla has Bluetooth. Generally, models with a screen are equipped with Bluetooth. Below are the reasons for Bluetooth connection issues in Toyota Corolla: 1. Unsuccessful Bluetooth pairing: Bluetooth pairing fails due to incompatibility between the two device systems. 2. External environmental interference: External environmental factors, such as nearby substations, can cause unstable signals. 3. Interference: Interference from the car's onboard computer or onboard network. 4. Multimedia system malfunction: The multimedia system may malfunction due to too many connection records or programming code errors.

1

2

Share

Why Does the Engine Stall When Shifting Gears Midway?

Stalling during gear shifts mainly occurs because the clutch is released too quickly after shifting, and the throttle is not promptly engaged. To avoid stalling when shifting gears, do not release the clutch too fast or too abruptly, and ensure the throttle is applied in time. Press the clutch pedal quickly and fully, then release it slowly and steadily. This requires a lot of practice to develop muscle memory. Here are some additional tips: Key points to remember: Proper coordination between the throttle and clutch is essential. When starting, shift into first gear, slowly release the clutch, and apply throttle while the clutch is partially engaged. Only fully release the clutch once the car begins to move. This also requires practice.

1

4

Share

Can an AT Transmission Last for 500,000 Kilometers?

With normal usage and proper maintenance, an AT transmission can last for 500,000 kilometers. The AT transmission is the most mature and widely used automatic transmission technology. AT transmissions are also known as torque converter transmissions, as they connect to the engine via a torque converter. 1. Dual-clutch transmission (DCT): Developed based on manual transmissions, this type of transmission only adds one extra clutch and a set of gear-shifting control mechanisms compared to a manual transmission. In a DCT, one clutch controls the odd-numbered gears, while the other controls the even-numbered gears. 2. Characteristics of DCT: Fast gear-shifting speed and high transmission efficiency.

4

3

Share

What Type of Car is DS?

DS is a premium brand under the French automaker PSA Peugeot Citroën. Here is some additional information: 1. Currently, DS brand models sold in China are produced and marketed by Changan PSA Automobile Co., Ltd., a joint venture between China Changan Automobile Group Co., Ltd. and the French PSA Peugeot Citroën Group. 2. The DS7 is one of the models under the DS brand. Its intelligent navigation system adjusts the vehicle's speed and safe distance based on the traffic ahead, while also automatically controlling the driving direction to stay within the original lane. Additionally, the lane-keeping assist feature corrects the vehicle's trajectory if it drifts out of the lane.

10

3

Share

Do 4S stores provide insurance for new cars?

What grade of gasoline is suitable for the Highlander?

How many times can you retake the exam if you fail the first subject of the driving test?

Does the 2017 Corolla have Bluetooth?

Why Does the Engine Stall When Shifting Gears Midway?

Can an AT Transmission Last for 500,000 Kilometers?

What Type of Car is DS?

What brand is the engine of Li Auto?

What kind of engine oil does Volvo use?

What does 'auto' mean on Volkswagen cars?

What Are the Consequences of Not Adding Antifreeze to a Vehicle?