Do 4S stores have original tires?

1 Answers
MacLevi
07/29/25 11:04pm
4S stores use original tires because all replacement parts at 4S stores must be covered by warranty. Using original tires can enhance structural and performance guarantees to some extent. This also reflects 4S stores' commitment to quality. Generally, 4S stores use original parts for car repairs. As 4S stores are manufacturer-authorized automotive maintenance and after-sales dealers, their parts are sourced directly from the manufacturers, commonly referred to as original parts. However, in reality, there might be a very small number of unscrupulous merchants who charge for original parts but actually use aftermarket parts. But such cases are rare and generally not encountered. A simple identification method: compare the old part from your car with the new replacement part, mainly focusing on workmanship, materials, part numbers, etc. Parts with rough workmanship are usually substandard products. In contrast to original parts, there are aftermarket parts. Aftermarket parts are made by other manufacturers who copy the original parts and produce them using their own molds. The advantage of aftermarket parts is their lower price, but the downside is that their quality is often poor due to various factors, making them prone to issues during use.
Was this review help?
19
3
Share
More Forum Discussions

What to Do If a White Car Gets Stained by Red Cloth?

Solutions for a white car stained by red cloth: 1. Solutions: If the staining is not severe, you can use a specialized car cleaner from an auto beauty shop. Spray it on and then wipe it off. Some of these professional cleaners can even remove paint scratches, making stains easier to clean. If the staining is extensive and severe, and left untreated for a long time, you will need to go to an auto beauty shop for polishing. Avoid polishing the same car multiple times, as each polishing session will thin the paint and damage the finish. 2. White car maintenance methods: Avoid prolonged exposure to sunlight, as it can cause the car to turn yellow. The sun's ultraviolet rays are the main cause of paint yellowing. Therefore, do not let sunlight directly hit the car; it's best to park in a shaded area. Wash the car frequently, especially after rain, as rainwater and dust can easily accumulate on the car's surface. Clean it promptly, otherwise dirt will adhere to the body over time, causing the paint to turn yellow.
2
3
Share

What is the battery model for Honda Civic car key?

The battery model is CR2032. The older Civic models use CR1616/1620 batteries, both of which are lithium manganese dioxide batteries, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F used for square batteries; 20 indicates the battery diameter is 20mm; 32 represents the battery height is 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, the lifespan can be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended further to 8 years or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use—the more frequently it is used, the shorter the lifespan. If the remote key battery runs out, the mechanical key can be used directly to unlock and start the vehicle. Car remote keys use button batteries, mainly in models: CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: This is one of the most commonly used car remote batteries. The battery voltage is 3V, while most car key batteries are powered by 9V, so all three batteries need to be replaced each time. Examples include Honda, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016, but it is still used in some car keys. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode is lithium metal, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are ethylene glycol dimethyl ether, propylene carbonate, and lithium perchlorate. It is shaped like a button, hence the name button lithium battery or lithium manganese button battery. Button battery CR2450: Compared to the other three models, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value for CR2450 is 0.2mA, mainly used in low-power electronic products. Generally, such batteries can provide an output current of 0.001mA to 5mA, with continuous output current up to 15mA and flash output current up to 30mA, meeting the requirements of most small electronic products for light emission, sound, and RF output.
11
2
Share

What is the gear introduction of Honda Lingpai?

Gear introduction of Honda Lingpai: Gear types: The automatic transmission models of Honda Lingpai have P, N, R, D. D gear: Drive gear, press the brake, hold the side button of the gear lever, and push it backward. S gear: Sport gear, used when torque is needed. Pull the gear lever backward from the D gear position to engage the gear. To disengage the S gear, pull it backward again. (This process does not require pressing the brake) N gear: Neutral gear, press the side button with your thumb and push the gear lever forward. R gear: Reverse gear, hold the side button and continue to push the gear lever forward. P gear: Parking gear, hold the P button on the gear lever. Manual mode: On the basis of D gear, continue to move the gear lever to the side to switch to manual mode. Move the gear lever up to shift up and down to shift down. Use of paddle shifters In the "D" gear position, press the brake and push the lever to the right to switch to manual mode. At this time, you can shift up or down through the "+" and "-" paddles on the steering wheel. Although the manual mode is a bit cumbersome, it can precisely control the gear shift at the appropriate speed and torque. Gear selection for different road conditions Uphill: When going uphill, more power is needed, so you should use "D-" to downshift the vehicle to obtain high torque for climbing. Some slopes are not steep, and the gear is too low at this time, causing power waste, so you should use "D+" to upshift in time. If the power is still insufficient, you can use the S gear sport mode. Downhill: Use "D+" to shift up to D2 or D3 gear, which can restrain the engine to achieve a braking effect. Generally, 2/3 gear can meet the requirements of restraining the vehicle. When the slope is particularly steep, please use 1 gear with the brake pedal to go downhill. When you find that the vehicle is gradually accelerating downhill and cannot be controlled, use "D-" to downshift in time to enhance the effect of restraining the engine.
8
1
Share

What is the difference between a motorcycle pushrod engine and a chain engine?

The difference between a motorcycle pushrod engine and a chain engine lies in their structure and power output. Below are the specific distinctions: Structure: A chain engine can increase speed and enhance power under the same displacement. A pushrod engine itself is not suitable for high-speed operation. To avoid the drawbacks of high speeds, it provides greater torque at medium to low speeds (commonly used range). Power Output: The simplest way for a chain engine to improve performance is by altering the cylinder diameter and stroke, which a pushrod engine cannot match. Chain engines generally focus on high-speed power output (without changing the cylinder capacity, increasing the cylinder diameter and shortening the stroke helps improve speed).
5
2
Share

What does the bright yellow exclamation mark in a car mean?

The bright yellow exclamation mark in a car refers to the traction control indicator light or the tire pressure monitoring indicator light. Here are the specific details: Traction Control Indicator Light: A yellow triangle with an exclamation mark in the middle indicates the traction control light, also known as the ground adhesion control system indicator. When this light is on, it alerts the driver to turn off the traction control system. If the light remains on, it indicates an issue with the traction control system. Tire Pressure Monitoring Indicator Light: A yellow bracket with an exclamation mark in the middle represents the tire pressure monitoring indicator light. If this light is on, it means the tire pressure is insufficient.
15
5
Share

How often should a new 7-seater vehicle undergo annual inspection?

For a new 7-seater vehicle, it should be inspected every 2 years within the first 6 years, annually after exceeding 6 years, and every 6 months after exceeding 15 years. Below is relevant information about 7-seater vehicle inspections: Documents required for 7-seater vehicle annual inspection: Owner's ID card; Original vehicle license; Valid compulsory traffic insurance policy; Current year's vehicle and vessel tax payment (or exemption) certificate (usually included in the compulsory insurance policy). Regulations for 7-seater vehicle annual inspection: Non-commercial passenger vehicles, including non-commercial cars, small and micro passenger vehicles, but excluding vans and models with 7 seats or more (such as Odyssey, GL8, Highlander 7-seater, etc.), cannot enjoy the exemption policy. New vehicles within 6 years are exempt from on-site inspection but need to apply for inspection stickers every 2 years; eligible private cars registered after September 2012 can enjoy the exemption policy, requiring annual inspection thereafter. Vehicles aged 6 to 15 years require annual on-site inspection, while those over 15 years need semi-annual on-site inspection.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.