Differences Between Xiangling M1 and M2

1 Answers
VonTeagan
07/29/25 9:59pm
Here are the main differences between Xiangling M1 and M2: 1. Cargo compartment: The M1 model has a cargo compartment length of 3.05 meters, width of 1.61 meters, and height of 1.7 meters. The body dimensions are: 5230/1750/2580mm (length/width/height), with a wheelbase of 2750mm. The M2 model has a cargo compartment length of 3.1 meters, width of 1.71 meters, and height of 1.7 meters. The body dimensions are: 5280/1850/2590mm (length/width/height), with a wheelbase of 2850mm. 2. Wheel track: The M1 has a front wheel track of 1320mm and rear wheel track of 1280mm. The M2 has a front wheel track of 1410mm and rear wheel track of 1320mm. 3. Weight: The M1 has a curb weight of 1.67 tons, rated load capacity of 1.695 tons, and gross vehicle weight of 3.495 tons. The M2 has a curb weight of 1.77 tons, rated load capacity of 1.465 tons, and gross vehicle weight of 3.365 tons.
Was this review help?
14
3
Share
More Forum Discussions

Where are the positive and negative terminals of the Audi A4 battery located?

Audi A4 battery positive and negative terminals: First, open the trunk, lift the floor panel, and remove the plastic cover to see the symbols marked with positive and negative signs (+ and --), which are the battery terminals of the Audi A4. It is essential to distinguish between the positive and negative wires to avoid incorrect connections that may cause damage. Here are several methods to distinguish the positive and negative terminals: 1. You can differentiate them based on the thickness of the battery terminal wires—most thick wires are positive, and thin wires are negative. 2. You can use two test leads connected to the battery terminals to distinguish the positive and negative terminals by voltage. 3. The color of the terminal can also indicate polarity—brown terminals are positive, while slate gray terminals are negative. 4. Generally, the terminal facing the manufacturer's logo on the battery case is positive, and the opposite side is negative.
18
2
Share

What is the wheelbase of the Lynk & Co 03?

The wheelbase of the Lynk & Co 03 is 2730mm. Below is some information about the Lynk & Co 03: 1. Introduction: The Lynk & Co 03 is the first sedan product under the Lynk & Co brand and the first sedan built on the CMA (Compact Modular Architecture) platform. 2. Dimensions: The length, width, and height are 4639mm × 1840mm × 1460mm respectively, with a wheelbase of 2730mm. 3. Powertrain: The Lynk & Co 03 2.0TD is equipped with Volvo's Drive-E 2.0TD series engine, delivering a maximum power of 140Kw and a peak torque of 300Nm.
8
1
Share

What is the actual range of the Mercedes EQC?

The official range of the Mercedes EQC as per the Ministry of Industry and Information Technology is 408 kilometers. The Mercedes EQC is a dual-motor model equipped with a 79.2kWh power battery, utilizing a ternary lithium battery. The driving range of new energy vehicles refers to the distance the vehicle can travel at a constant speed under ideal road conditions, wind speed, temperature, etc., on a single full charge. Hybrid vehicles and lead-acid battery vehicles (low-speed vehicles) generally have a relatively shorter driving range. Driving range can also be referred to as endurance capability, which denotes the total distance a vehicle or ship can travel continuously with maximum fuel reserves. For electric vehicles, the driving range is the distance traveled from a fully charged state of the power battery to the end of the test as specified by the standard. It is an important economic indicator for electric vehicles. For new energy vehicles, the maximum battery-supported driving range refers to the highest distance the vehicle can travel in pure electric mode, relying solely on the battery's charge. The battery in a new energy vehicle is the key component of the entire power system, providing electricity to the whole system. However, constrained by materials and technology, the driving range provided by the battery is limited.
18
2
Share

What are the steps to replace the battery in an Audi Q7?

The battery of the Audi Q7 is located under the driver's seat. To replace the battery, first remove the driver's seat, then lift the carpet, and disconnect the positive and negative terminals to replace it directly. Below is a related introduction to the Audi Q7: 1. The Audi Q7 is a mid-to-large luxury SUV under the Audi brand, with a wheelbase of 2996 mm, and dimensions of 5067 mm in length, 1970 mm in width, and 1731 mm in height. 2. The Audi Q7 uses two engines, one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. The 2.0-liter turbocharged engine of the Audi Q7 has 245 horsepower and a maximum torque of 370 Nm, with the maximum torque range from 1600 to 4300 rpm and the maximum power range from 5000 to 6000 rpm.
9
2
Share

What transmission does the Lexus ES use?

This model uses a total of three transmissions, namely the CVT transmission, eCVT transmission, and 8-speed automatic transmission. Below is an introduction to the Lexus ES transmissions: 1. The ES has three powertrain configurations: a 2.0L naturally aspirated engine paired with a CVT transmission, a 2.5L naturally aspirated engine paired with an 8-speed automatic transmission, and a 2.5L naturally aspirated engine paired with a 120-horsepower electric motor and an eCVT transmission. 2. The 2.0L naturally aspirated engine in the Lexus ES has the model code M20A-FKS. This engine delivers a maximum power of 127 kW, a maximum torque of 208 Nm, with peak power achieved at 6,600 rpm and peak torque between 4,400 and 5,200 rpm. 3. The 2.5L naturally aspirated engine in the Lexus ES has the model code A25A-FKS. This engine delivers a maximum power of 152 kW, a maximum torque of 243 Nm, with peak power achieved at 6,600 rpm and peak torque between 4,000 and 5,000 rpm.
5
1
Share

Do all China VI vehicles have particulate filters?

Most China VI vehicles are equipped with particulate filters. Here are relevant introductions about particulate filters: Introduction to particulate filters: The Diesel Particulate Filter (DPF) is a ceramic filter installed in the diesel engine emission system, which can capture particulate emissions before they enter the atmosphere. Function of particulate filters: Particulate filters can reduce soot produced by diesel engines by more than 90%. The captured particulate emissions are subsequently burned off during vehicle operation. The basic working principle is: If the diesel particulate filter is coated with metals such as platinum, rhodium, and palladium, the black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate trap through a special pipeline. After passing through its densely arranged bag filters, the carbon particles are adsorbed on the filter made of metal fiber felt.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.