Differences Between Vision and Emgrand?

2 Answers
StSienna
07/28/25 4:13pm
The differences between Vision and Emgrand are: 1. Different body dimensions: The Vision measures 4599mm in length, 1747mm in width, and 1482mm in height; the Emgrand measures 4632mm in length, 1789mm in width, and 1470mm in height. 2. Different transmissions: The Vision is equipped with a 5-speed manual, 4-speed automatic, or CVT transmission; the Emgrand is equipped with a 5-speed manual or CVT transmission. The Emgrand is powered by a 1.3T GeTec DVVT turbocharged engine, featuring front-wheel drive, with a maximum power output of 98kw, and reaches peak torque of 185NM at 2000 rpm.
Was this review help?
5
2
Share
VanSadie
08/11/25 11:14pm
I've always thought the biggest differences between the Vision and Emgrand lie in price and practicality. The Vision is Geely's entry-level economy car, starting several ten thousand yuan cheaper with simpler but sufficient configurations. It's fuel-efficient and cost-effective, especially suitable for young people with tight budgets or just entering society. The Emgrand is a bit more expensive, serving as Geely's main compact sedan with more refined interiors, such as leather seats and touchscreen displays, offering much more stability and comfort on highways. The Vision offers better value for money, while the Emgrand provides stronger comfort—it depends on whether you want to save money or enjoy the ride. Among my friends, those who choose the Vision for commuting prefer the Emgrand for long-distance travel for more peace of mind.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What to Do When Peugeot 408 Transmission Fails?

Peugeot 408 transmission warning alarm solutions: 1. Fault phenomenon: While driving the Peugeot 408, a transmission fault warning alarm appears, with the snowflake light and S light flashing alternately on the dashboard. The transmission does not shift up, and after stopping and restarting, the vehicle lacks acceleration power, moves slowly, and the engine runs at high RPM. 2. Cause analysis: Computer diagnostics of the Peugeot 408 transmission system fault code show that the brake-by-wire consistency fault type is an intermittent fault, caused by intermittent signal abnormalities in the transmission's external circuit. 3. Solution: Timely repair is needed. Replace with a new brake-by-wire sensor and adjust it to the appropriate position.
12
4
Share

Is the Subaru XV a Station Wagon or an SUV?

Subaru XV is a compact SUV under the Subaru brand, with dimensions of 4480mm in length, 1800mm in width, and 1595mm in height, and a wheelbase of 2665mm. In terms of power, the Subaru XV offers both hybrid and pure gasoline versions. The hybrid version is a single-motor model, equipped with a 2.0-liter naturally aspirated engine, paired with a CVT transmission. In terms of appearance, the Subaru XV features a very youthful and stylish design. The front face adopts the family-style quadrilateral front grille design, complemented by sharp-looking LED headlights on both sides, giving the front face an excellent visual appeal. For the suspension, the front suspension uses a MacPherson independent suspension, while the rear suspension employs a double-wishbone independent suspension.
1
5
Share

Where is the production location of Lynk & Co cars?

Lynk & Co is a premium brand of the new era jointly established by Geely Holding Group, Geely Auto Group, and Volvo Cars. It is built on the CMA (Compact Modular Architecture) mid-size car platform, co-developed by Volvo Cars and Geely Auto, with Volvo Cars leading the development. Currently, Lynk & Co has two production plants in China. Below is a detailed introduction to the production locations of Lynk & Co cars: 1. The first plant is Volvo's Taizhou Luqiao Plant, where Lynk & Co models are produced. 2. The second plant is the Zhangjiakou Plant, where Lynk & Co 02 and 03 are produced. 3. In 2019, the Lynk & Co 01 PHEV model was also produced on the same production line as Volvo Cars at the Ghent Plant in Belgium and officially entered the European market for sales in 2020.
20
3
Share

Is Skoda a Subsidiary Brand of Volkswagen?

Regarding the question of whether Skoda is a Volkswagen brand, the detailed explanation is as follows: 1. Skoda is one of the classic brands of Volkswagen AG, headquartered in Mladá Boleslav, Czech Republic, and is one of the four oldest car manufacturers in the world. 2. In 2006, the Skoda Octavia began production at SAIC Volkswagen, becoming the third car brand under the Volkswagen Group to be produced in China, following Volkswagen and Audi. 3. Germany is Skoda's largest export market. In 2003, Skoda car sales in Germany exceeded 70,000 units, followed by the United Kingdom, where Skoda has now become the second-largest imported car brand. Skoda has become one of the most successful companies in the Czech Republic.
2
2
Share

Does the Wuling Hongguang S3 have airbags?

The Wuling Hongguang S3 manual standard model does not have airbags. The 1.5L and 1.5T manual comfort models are equipped with a driver-side airbag, while the 1.5L and 1.5T manual luxury models feature both driver and passenger airbags. Below is a detailed introduction to the automotive airbag system: 1. Function: In the event of a collision, the airbag distributes the impact force evenly across the head and chest, preventing direct contact between the passenger's body and the vehicle structure, thereby reducing the likelihood of injury. 2. Supplementary Safety Device: The automotive airbag system serves as a supplementary safety system, typically functioning as an auxiliary safety device alongside seat belts. Airbags are designed to be used in conjunction with seat belts.
18
2
Share

What does BBS mean?

BBS refers to a German automotive parts manufacturer. Below are the specific details about BBS: 1. Multinational Wheel Hub Group: The company headquarters is located in Schiltach, southern Germany. It operates four world-class production bases in Germany, Italy, and China, along with multiple product R&D centers worldwide, making it a multinational wheel hub manufacturing group. 2. Core Business: BBS primarily manufactures automotive wheel hubs, producing and developing high-quality lightweight alloy wheel hubs. It serves as an original equipment supplier for renowned global automotive brands such as BMW, Audi, Porsche, Volkswagen, Mercedes-Benz, Land Rover, Jaguar, Volvo, Peugeot-Citroën, and Renault. Additionally, it is the exclusive wheel hub supplier for Ferrari and Maserati sports cars.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.