Differences Between Varta Silver and Blue Labels?

1 Answers
EverlyRose
07/30/25 9:18am
There are significant differences between Varta Silver and Blue label batteries, as detailed below: 1. Different materials used: Varta Silver label uses reinforced plates, while the Blue label uses standard plates. Simply put, the Silver label uses more materials than the Blue label, making it heavier. 2. Different warranty periods: The Silver label has a longer warranty period than the Blue label, with the Silver label offering a two-year warranty and the Blue label a one-year warranty. 3. Different prices: The Silver label is more expensive than the Blue label, costing 80-300 RMB more depending on the specific model. 4. Different performance: The Silver label performs better than the Blue label. 5. Different lifespans: The Silver label series has a longer lifespan, while the Blue label series also performs well in terms of lifespan.
Was this review help?
1
3
Share
More Forum Discussions

Should the turn signal be turned off manually during parallel parking?

Parallel parking requires the turn signal to be turned off manually. After the examinee parks the car in the garage, the left turn signal should be turned on when starting. Once the car's tires have completely exited the garage, the turn signal should be turned off when the vehicle is straightened. It is important to note that failing to use the turn signal during parallel parking will result in a 10-point deduction. Below is an introduction to relevant knowledge about parallel parking: 1. Operation requirements: The driver must maneuver the vehicle into the right-side parking space (garage) by moving forward and backward once without touching or scraping the garage poles or running over the lane boundary lines or garage boundary lines with the wheels. 2. Garage dimensions for small cars: The length of the parking space (garage) for small cars is 1.5 times the vehicle length + 1m; the width of the parking space (garage) = vehicle width + 0.8m, and the lane width = 3.5m.
13
2
Share

Is the A6L Front-Wheel Drive or Rear-Wheel Drive?

a6l is front-wheel drive. Audi's front-wheel-drive models are better suited for aggressive driving styles, as the distance between the engine and the drive wheels is relatively short, resulting in higher transmission efficiency. Rear-wheel-drive models, on the other hand, experience greater power loss during transmission due to the longer distance between the engine and the drive wheels. Rear-wheel-drive vehicles use a front-engine, rear-wheel-drive layout, where the power generated by the engine must be transmitted through a long driveshaft to the rear differential, which then splits the power to two half-shafts to drive the rear wheels. This structural design of rear-wheel-drive vehicles results in some power loss from the engine. The Audi A6L has a body size of 50384mm in length, 18864mm in width, and 1475mm in height, with a wheelbase of 3024mm.
14
3
Share

What are the length, width, and height of the Audi Q5L?

The length, width, and height of the Audi Q5L are 4753mm, 1893mm, and 1659mm respectively, with a wheelbase of 2908mm. This vehicle is a mid-size SUV equipped with two engine options: a low-power version 2.0-liter turbocharged engine and a high-power version 2.0-liter turbocharged engine. Both engines are paired with a 7-speed dual-clutch transmission. The low-power version 2.0-liter turbocharged engine delivers a maximum power of 140kW and a maximum torque of 320Nm, featuring hybrid injection technology and utilizing an aluminum cylinder head with a cast iron cylinder block. The high-power version 2.0-liter turbocharged engine produces a maximum power of 185kW and a maximum torque of 370Nm, also featuring hybrid injection technology and employing an aluminum cylinder head with a cast iron cylinder block.
2
0
Share

What documents are required for out-of-town vehicle inspection in 2021?

Below are the documents required for out-of-town vehicle inspection in 2021: 1. Road Transport Permit. 2. Vehicle License. 3. Vehicle Comprehensive Performance Inspection Report, safety inspection materials (including "Motor Vehicle Safety Technical Inspection Report," copy of the motor vehicle inspection compliance label, copy of the vehicle license). Note: 1. Enterprises need to bring their official seal. 2. Heavy-duty trucks and semi-trailer tractors should also provide the printed Beidou driving recorder slip for the day. Additional Information: 1. Article 13 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that motor vehicles registered for road use shall undergo regular safety technical inspections according to laws and administrative regulations, based on factors such as vehicle usage, passenger and cargo capacity, and service life. 2. Motor vehicle safety technical inspection institutions shall conduct inspections upon presentation of the vehicle license and compulsory third-party liability insurance policy for the motor vehicle. No unit may impose additional conditions. For motor vehicles that meet national safety technical standards, the traffic management department of the public security authority shall issue an inspection compliance label.
3
4
Share

What is the debugging method for the Q5 air conditioning?

q5 air conditioning debugging method is: 1. After the car is started, wait for 8 to 15 minutes until the water temperature rises to normal temperature; 2. Adjust the air conditioning circulation mode to internal circulation; 3. Press the AUTO button to activate the air conditioning, which will automatically adjust the interior temperature; 4. Press the AC button to enter the temperature setting mode, where you can manually set the desired temperature. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. The air conditioning system has become a standard for measuring the completeness of a car's features. Taking the 2018 Audi Q5 as an example, its body dimensions are 4629mm in length, 1898mm in width, 1655mm in height, with a wheelbase of 2807mm.
7
5
Share

Is the Audi A6 compliant with China 5 or China 6 emission standards?

Audi A6 complies with China 6 emission standards, which generally refer to the National Sixth Stage Emission Standards for Motor Vehicles. The Audi A6 is equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 3.0-liter turbocharged engine. The low-power version 2.0-liter turbocharged engine has a maximum power of 140 kW, a maximum torque of 320 Nm, a maximum power speed range of 4,200 to 6,000 rpm, and a maximum torque speed range of 1,450 to 4,200 rpm. The high-power version 2.0-liter turbocharged engine has a maximum power of 165 kW, a maximum torque of 350 Nm, a maximum power speed range of 5,500 to 6,000 rpm, and a maximum torque speed range of 1,600 to 4,500 rpm. The high-power version 2.0-liter turbocharged engine features hybrid injection technology and uses an aluminum alloy cylinder head.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.