Differences Between Tubeless Tires and Regular Tires

What Causes a Sudden Scraping Metal Sound from the Car's Chassis?

Here are the reasons for a sudden scraping metal sound from the car's chassis: Disc brake noise: This occurs when the brake shoe support plate, damping spring plate, or guide plate of the disc brake is damaged, deformed, or detached, causing the gap between the brake shoe and the caliper support frame to increase, leading to mutual collision and noise. You can visit a repair shop to fix the deformed parts or replace the detached components. Front suspension ball joint noise: The gap between the ball joint and its seat becomes larger, resulting in severe looseness. Since the ball joint seat is a sealed structure and cannot be disassembled, the only solution is to replace it at a repair shop. Front wheel shock absorber noise: The vehicle often drives on rough roads with improper maintenance, causing the shock absorber to leak oil and become damaged. At a repair shop, the severity of the damage will determine whether it needs repair or replacement.

2

3

Share

What are the reasons for parking too far back in parallel parking?

Here are the specific explanations for the reasons of parking too far back in parallel parking: 1. Too far away: The biggest problem in parallel parking is the control of distance. If the distance from the vehicle on the right is too far when parking, the reversing angle will be too large. Even if the rear wheels can enter the parking space, the remaining distance makes it difficult to straighten the car. 2. Inappropriate front and rear distance: The distance available for reversing your car will be shortened. Often, when you are very close to the car behind, most of the front of your car is still outside the parking space. At this point, even if you turn the steering wheel to the right and move forward to try to bring the front of your car into the parking space, the entire car will still move outward and cannot fully enter the parking space. The key mistake here is not making full use of the entire length and space of the parking spot.

15

1

Share

What does energy recovery in electric vehicles mean?

Here is a detailed introduction to energy recovery in electric vehicles:1. Features: In traditional fuel vehicles, when the vehicle passes through the braking system, the friction generates heat, converting the energy produced by friction into heat and dissipating it. In electric vehicles, when the drive stops, the car wheels drive the motor to act as a generator, charging the battery, thereby achieving energy recovery and significantly increasing the range. 2. Range: The minimum range reaches 440 kilometers, which is partly due to the contribution of braking energy recovery. Among domestic electric brands, BYD is far ahead. As the first automaker to venture into the new energy field, its technology in this area has become increasingly mature. The Song series it launched has gained widespread recognition in the electric vehicle sector, making it one of the two most recognized automakers by the majority of users. The energy recovery system it employs is also among the top in the industry.

19

4

Share

What are the symptoms of a faulty car fuel tank charcoal canister?

The symptoms of a faulty car fuel tank charcoal canister include: a noticeable increase in gasoline odor, sometimes leading to higher fuel consumption or the engine stalling easily at idle. The charcoal canister is typically installed between the fuel tank and the engine. Since gasoline is a highly volatile liquid, the fuel tank often contains vapor at normal temperatures. The fuel evaporation emission control system is designed to direct these vapors into the combustion process and prevent them from escaping into the atmosphere, with the activated charcoal canister storage device playing a crucial role in this process. The charcoal canister is a container filled with activated carbon, which collects gasoline vapors for secondary use. Gasoline is highly volatile, and the pressure inside the fuel tank increases as it evaporates. To prevent potential hazards, early designs often featured the fuel tank cap as a pressure relief valve. When the pressure inside the tank exceeds a certain level, the relief valve opens, releasing gasoline vapors directly into the atmosphere.

9

3

Share

What is the difference between two and a half turns and one and a half turns of the steering wheel?

Here are the specific differences between two and a half turns and one and a half turns of the steering wheel:1. Transmission aspect: The number of turns the steering wheel can make is determined by the transmission ratio of the steering system. The larger the transmission ratio, the more turns the steering wheel can make, making steering lighter, but the car's handling becomes less sensitive; the smaller the transmission ratio, the fewer turns the steering wheel can make, making steering heavier, but the direction is very sensitive, with the car turning sharply even with a small angle of the steering wheel. 2. Gravity aspect: A steering wheel that can make two turns is lighter than one that can make one and a half turns, but the handling sensitivity is not as good as that of a car with one and a half turns. Cars that focus on comfort have steering wheels with more turns, while those that focus on handling have steering wheels with fewer turns.

9

0

Share

Is adding one liter of engine oil too much for a underbone motorcycle?

A bit too much, which may cause oil burning or reduced power. It's better to drain some if possible. Here are the relevant details: 1. Oil quantity: For most common domestic motorcycles below 150CC, the oil quantity usually doesn't exceed one liter. Never fill the motorcycle engine oil to full capacity - the oil level should always be checked using the dipstick or oil inspection window. 2. Dangers of overfilling: Overfilling engine oil can cause multiple issues including engine overheating, power loss, oil leakage, blue smoke from the engine, and clutch disengagement failure. 3. Dipstick position: The oil dipstick is located at the rear of the right side cover of the engine. After removal, you'll see a crosshatched area at the end of the dipstick - this is the oil level indicator zone. The two ends of this zone represent the upper and lower limits of the oil quantity.

7

0

Share

Differences Between Tubeless Tires and Regular Tires

What Causes a Sudden Scraping Metal Sound from the Car's Chassis?

What are the reasons for parking too far back in parallel parking?

What does energy recovery in electric vehicles mean?

What are the symptoms of a faulty car fuel tank charcoal canister?

What is the difference between two and a half turns and one and a half turns of the steering wheel?

Is adding one liter of engine oil too much for a underbone motorcycle?

Which factory produces the Lutailai tires?

What to Do When a Vehicle Battery Leaks?

What are the reasons for the high fuel consumption of the BMW X1?

Is Chebu Three-Way Catalytic Cleaner Effective?