Differences Between the Panamera Sport Turismo and the Regular Version

1 Answers
IsabelleAnn
07/29/25 2:29pm
The rear design and trunk space of the Panamera Sport Turismo model differ significantly from those of the regular version. Below are some details about the Panamera: 1. The Panamera is a large luxury car under Porsche, featuring a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. 2. The Panamera is equipped with two types of engines: a 2.9-liter twin-turbocharged engine and a 4.0-liter twin-turbocharged V8 engine. The 2.9-liter twin-turbocharged V6 engine delivers 330 horsepower and a maximum torque of 450 Nm, while the 4.0-liter twin-turbocharged V8 engine offers 460 horsepower and a maximum torque of 620 Nm. Both engines are paired with an 8-speed dual-clutch transmission.
Was this review help?
1
3
Share
More Forum Discussions

How to Solve Hard Braking When Air Conditioning is On?

Car air conditioning on causes hard braking due to reduced brake vacuum assist. It is recommended to go to a 4S shop for inspection and repair. The following is a detailed introduction about car brakes: 1. Brake: Brake, also known as deceleration, refers to the action of stopping or reducing the speed of running locomotives, vehicles, and other transportation tools or machinery. The brake device is a mechanical braking device that can slow down the speed, also known as a decelerator. 2. Brake system: The brake system consists of a control system, hydraulic system, and assist system. The control system is the pedal, handbrake, etc. The hydraulic system consists of hydraulic oil, brake pump, and hydraulic oil pipes. The assist system is the vacuum assist pump. The electronic control system consists of ABS pump, ABS sensor, and ABS computer. The execution system consists of brake calipers, brake pads, and brake discs.
4
3
Share

Audi 4S Store Recruitment Requirements

Audi 4S Store Recruitment Requirements: First, a university graduate with an intermediate or above automotive repair qualification, holding a driver's license and proficient in driving with over 3 years of driving experience, and having worked in related automotive or sales positions for more than 3 years. Presentable appearance, dignified and appropriate behavior; possessing good verbal and communication skills, a strong customer service philosophy, enthusiasm and perseverance for work, a dedicated spirit of hard work and pioneering courage; willing to learn, and capable of developing certain market expansion abilities through training. Clear thinking, cheerful personality, honesty, and a sense of responsibility; academic qualifications are not the deciding factor, the key is the comprehensive ability of the applicant. Outstanding candidates with vocational school education or above are also acceptable.
13
0
Share

How Many Grams of Refrigerant Can Be Added to the JAC Refine Air Conditioning?

JAC Refine requires between 1200-1800 grams of refrigerant, which is equivalent to 2 to 3 bottles. The role of automotive refrigerant includes the following 3 points: 1. Heat dissipation: It uses its own physical changes to remove heat from the vehicle. Under high pressure, the refrigerant forms a liquid and releases heat; 2. Phase change: When it flows back to the expansion valve, influenced by the pressure difference, it instantly changes from liquid to gas, absorbing a large amount of heat around the evaporator, similar to how water absorbs heat when it turns into steam; 3. Heat release: The compressor draws it into the cylinder for compression, transforming it from gas to liquid, then releases heat, which is dissipated through the condenser using a fan—this is the function of the refrigerant.
14
0
Share

How to Set Up BMW Folding Mirrors?

BMW mirror folding method: The BMW 5 Series has a mirror folding button on the driver's side door panel. Press the folding button located at the upper right of the door, symmetrically on both left and right doors. Pressing this button will fold the mirrors. Here is some relevant information: 1. Before adjusting the mirrors, you must adjust the vehicle seat and steering wheel position. The basic principle of seat adjustment is to sit comfortably, have a clear view, and use the steering wheel with ease. Maintaining the correct sitting posture is a prerequisite for adjusting the mirrors; improper posture will prevent the mirrors from functioning as intended. 2. For the central interior mirror, adjust the horizon's reflection in the central mirror to the center of the mirror and position the reflection of the right ear to the left edge of the mirror.
10
4
Share

How to Make Audi Ambient Lights Change Colors Automatically?

Audi ambient lights can be adjusted through the MMI display. Select the option on the central control screen, and when entering the lighting options, check the ambient light option to turn it on. Here is the related introduction: 1. Reputation: Audi ambient lights are renowned in the automotive industry. Their high aesthetic appeal, combined with the illumination from the lights, instantly enhances the atmosphere in outdoor gathering scenarios. 2. Adjustment Function: The ambient lights can automatically adjust between warm and cool tones. During driving, soothing music paired with the right ambient lighting can instantly alleviate the driver's fatigue, providing an excellent driving experience. Besides improving mood, ambient lights are also a key focus for many car modification enthusiasts. Though subtle, they play a crucial role in enhancing the car's interior. Enthusiasts often replace the factory-installed ambient lights with ones that offer better lighting effects, further elevating the style of the car's interior.
14
5
Share

How to Clean a Diesel Particulate Filter?

The cleaning process for a diesel particulate filter generally follows these steps: First, remove the particulate filter and place it on a testing device, then use the probe on the device to check the clogging condition of the filter; Next, preheat the cleaning equipment to 300°C, then place the particulate filter inside the device and raise the temperature to 600°C for oxidation treatment of carbon deposits; After the treatment is completed, cool the particulate filter, then use a high-pressure blowing tool to clean it; Once cleaning is done, record the data of the particulate filter using professional measuring equipment; After completing the above steps, reassemble the particulate filter and install it back into the vehicle. How often should the particulate filter be cleaned: There is no specific cleaning interval for the particulate filter. When the particulate filter warning light on the dashboard illuminates, it is time to clean it.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.