Differences between the Maybach S400 and the Mercedes-Benz S400?

1 Answers
Herbert
07/29/25 6:51pm
Differences between the Maybach S400 and the Mercedes-Benz S400 are as follows: 1. Differences in badging: On the Maybach S400, the left side features the "Maybach" lettering, while the right side has the "S400" badge; whereas on the Mercedes-Benz S400L, the left side displays the "S400L" badge, and the right side shows the "4MATIC" lettering. 2. Differences in exhaust pipe presentation: The Mercedes-Benz S400L has a "hidden" dual-sided quad-exhaust setup, visually resembling a traditional dual-sided dual-exhaust style; while the Maybach S400's presentation is more direct, with an additional horizontal double-layer chrome trim strip above the exhaust pipes.
Was this review help?
9
5
Share
More Forum Discussions

Why is the speed limit on Qinglan Expressway set at 80?

The speed limit of 80 is for motorcycles. On the Qinglan Expressway, the maximum speed for small passenger vehicles must not exceed 120 kilometers per hour, other motor vehicles must not exceed 100 kilometers per hour, motorcycles must not exceed 80 kilometers per hour, and the minimum speed must not be lower than 60 kilometers per hour. Introduction to speed limits: Speed limits generally refer to the regulation of vehicle speeds within a certain numerical range over a specified length of road. Purpose of speed limits: The main purpose is to pre-warn drivers to reasonably control their speed in subsequent sections of the road ahead, prevent the dangers of speeding, and ensure driving safety. Speed limits are an indispensable and most important part of road transport safety.
17
4
Share

What Lights Should Be Turned On in Foggy Weather?

Traffic regulations clearly stipulate that when driving in foggy conditions, fog lights, hazard warning flashers, and low beam headlights must be turned on simultaneously. Here are a few important points to note when driving in foggy weather: Control Speed and Distance: Drive at a low speed in fog and strictly control your speed based on visibility. Maintain sufficient safety distance between vehicles and pedestrians. If necessary, sound the horn appropriately to alert pedestrians and other vehicles. When Visibility Is Extremely Low: When visibility is very poor, turn on the hazard warning lights, maintain a low speed, and try to find a safe place to stop. Because after turning on the hazard lights, the turn signals of most vehicles become ineffective, making it easier to cause accidents when changing lanes or turning.
13
5
Share

Can a 150cc motorcycle be registered in Shaoguan?

Yes, a 150cc motorcycle can be registered in Shaoguan. The registration requirements for motorcycles are that the engine displacement must be below 250cc and above 50cc, and the motorcycle must be manufactured by a legitimate motorcycle manufacturer and come with a certificate of conformity. Additionally, a purchase certificate or official invoice from a legitimate motorcycle dealer is required, along with the payment of compulsory traffic insurance premiums and vehicle purchase tax. Documents required for registration: If the vehicle is not an imported motor vehicle exempt from safety technical inspection as stipulated by the customs or the competent department of motor vehicle products under the State Council, a motor vehicle safety technical inspection certificate must be submitted. Documents to be verified for registration: Within two days from the date of accepting the application, the vehicle management office shall verify the motor vehicle, check the vehicle identification number (VIN) imprint, review the submitted documents and certificates, and issue the motor vehicle registration certificate, license plate, driving license, and inspection qualification mark.
7
3
Share

Can You Cross the Solid Line When Pulling Over?

You cannot cross the solid line when pulling over. During the driving test (Subject 3), when pulling over to the side of the road, there is a white solid line that must not be crossed. You should stay within 30 centimeters of the white line without touching it. Here are some precautions to take during the Subject 3 test: Inspection before getting in the car: Before the Subject 3 test, you need to walk around the car for inspection and pause briefly near the sensor to ensure it detects you. Adjustments before operation: Adjust the car's rearview mirrors and seat height, fasten the seatbelt, and ensure the gear is in neutral before starting the engine. Slow down in school zones: When driving through school zones during Subject 3, pay attention to the conditions on both sides or around the road. Always slow down and be vigilant for students crossing the road. Especially during school hours or dismissal times, be prepared to yield to students and children crossing the road. If students are crossing, stop and give way immediately, avoiding honking or competing with them for the right of way.
16
3
Share

What brand is Triangle tire?

Triangle is Triangle Tire, formerly known as Weihai Tire Factory founded in 1976. The company's products cover six series including commercial vehicle tires, passenger car tires, bias engineering tires, radial engineering tires, giant tires, and special tires. Triangle's car tires are suitable for high-speed driving, with good heat dissipation, stability, handling, low noise, and high safety. Triangle's industrial tires are highly efficient and wear-resistant, widely used in forklifts, battery cars, and flatbed trucks, commonly seen in factories, ports, docks, logistics, and other fields. The market covers more than 180 countries and regions worldwide, with marketing branches in North America, Europe, Central and South America, Australia, Southeast Asia, the Middle East and Africa, Russia, India, and other places. Triangle Tire has received official product quality certifications from 60 countries or major economies worldwide, including CCC, ECE, DOT, INMETRO, LATU, GSO, SNI, etc. In China, it provides supporting services for more than 50 automobile companies such as China National Heavy Duty Truck Group, FAW Jiefang, Jiangling Motors, King Long Bus, Yutong Bus, Zhongtong Bus, SAIC-GM-Wuling, FAW Car, Zhengzhou Nissan, Changan Suzuki, and Jiangling Motors. Tires are one of the most important components of a car. Their main functions include: Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; Transmitting traction and braking torque to ensure good adhesion between the wheel and the road surface, improving the car's power, braking, and passability; working with the car's suspension to cushion the impact during driving and dampen the resulting vibration; Preventing severe vibration and early damage to car components, adapting to the vehicle's high-speed performance, reducing driving noise, and ensuring driving safety, handling stability, comfort, and energy efficiency. Triangle Tire maintenance methods: Increase awareness of tire safety and check tires regularly; Regularly correct wheel balance. Unbalanced wheels will produce high-frequency swings during high-speed driving, causing uneven tire wear; Regularly rotate tires. To maintain even wear on the same vehicle, tires should be rotated every 5,000 kilometers. In daily use of Triangle tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, and other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be a hidden danger of tire blowouts during high-speed driving. Additionally, stones in the grooves should be removed immediately; Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear; Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and the pressure will increase. In this case, stop to cool down. Do not deflate or splash water to cool down, as this may cause abnormal aging of the tread rubber; Avoid sudden braking. Try to minimize frequent use of brakes and emergency braking to prevent accelerated tread wear due to dragging between the tire and the ground.
8
0
Share

What lights should be turned on when leaving a parking spot?

When leaving a parking spot, you must turn on the left turn signal. When preparing to park at a certain location, you should turn on the right turn signal. Reasons for turning on lights when starting the car: Turn signals should be used when starting the car to alert following vehicles to slow down and yield. Use the right turn signal when parking. Additionally, at night, turn on the low beam when starting, and use the parking lights or side marker lights when waiting parked. In foggy conditions, turn on the fog lights. Types of car lights: Cars are equipped with low beam, high beam, parking lights, daytime running lights, hazard lights (emergency flashers), fog lights, brake lights, reverse lights, and turn signals. Each type of light has a different meaning, and it's important to use them correctly.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.