Differences Between the Lynk & Co 01 and the Volvo XC40

How to Distinguish Between Good and Bad Car Batteries?

Methods to determine the condition of a car battery: 1. Check the battery status through the observation window. Green, yellow, and black colors indicate good battery condition. Yellow means the battery capacity is insufficient, while black indicates battery damage. 2. Assess the battery's usage status. If the battery fails to hold a charge, frequently runs out of power, or cannot be recharged, it signifies damage. 3. Inspect the battery's external condition. Noticeable bulging or swelling on the sides or white powdery substances around the terminals indicates performance issues. 4. Use a multimeter to measure the battery voltage. First, select the DC voltage setting (20V range). Connect the red probe to the positive terminal and the black probe to the negative terminal. Measure the static voltage before starting the car; it should be between 11.8V and 12.8V. A reading between 11V and 11.8V suggests slight discharge but still allows starting. Below 11V indicates severe discharge, preventing the car from starting, requiring a dedicated battery charger. If the voltage doesn't return to normal after charging, the battery is internally aged or faulty and needs replacement. Measure the dynamic voltage after starting the car; it should be between 13.2V and 14.8V. Abnormal readings (too high or too low) suggest a faulty voltage regulator in the alternator, requiring replacement. Measure the minimum voltage during startup; it should be above 9V. Below 9V may cause difficulty or failure to start, necessitating battery charging or replacement if the issue persists.

4

Share

What is traffic violation code 10393 and how is it penalized?

10393 traffic violation code and its penalties are as follows: 1. Violation code 10393 is issued when a motor vehicle is parked or temporarily stopped in violation of regulations, the driver is not present, or although present refuses to leave immediately, obstructing the passage of other vehicles or pedestrians. 2. No points are deducted, but a warning is issued. Tips for new drivers to avoid violations: 1. New drivers should pay attention to road signs and overhead indicators, understand the meaning of traffic signs before driving. When approaching an intersection, slow down in advance, observe the road and traffic signs at the intersection, and choose the correct driving route. 2. Long-term parking is prohibited in temporary parking zones or no-parking zones.

4

Share

What do R, N, D, S mean on a car?

The R, N, D, S on a car are the gears of an automatic transmission vehicle: 1. R stands for Reverse gear. 2. D stands for Drive gear. 3. N stands for Neutral gear. 4. S stands for Sport mode. There are three common types of automatic transmissions in cars: 1. AT transmission: The AT transmission is the most mature and widely used automatic transmission, which is connected to the engine via a torque converter. 2. Dual-clutch transmission: One clutch in a dual-clutch transmission controls the odd-numbered gears, while the other clutch controls the even-numbered gears. 3. CVT transmission: The CVT transmission is a simple-structured automatic transmission, consisting of only two cone pulleys and a steel belt inside.

20

5

Share

What is the fuel tank capacity of the Wuling Zhiguang 6376nf in liters?

2020 Wuling Zhiguang has a total of 3 models, all with a fuel tank capacity of 38 liters. The entire lineup is equipped with a 1.2L-76 horsepower-L4 engine, all models use a 5-speed manual transmission (MT), and all vehicles adopt a mid-engine rear-wheel drive configuration. Among vehicles in the same class, the Dongfeng Xiaokang K05S-2019-1.2L Utility Type VI-DK12 has a fuel tank capacity of 40 liters, while the Fengjing V3-2017-1.0L Basic 7-seater 4W10M1 has a fuel tank capacity of 45 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the automobile manufacturer is measured from the bottom of the tank to the safety limit level. There is additional space from the safety limit level to the tank opening, which is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the pointer is near E, it indicates low fuel, and when it approaches F, it means the fuel level is sufficient.

19

2

Share

Is it necessary to apply window film to a new car?

New cars require window film. In the event of glass breakage, the film can slow down the impact speed of shattered glass fragments, thereby protecting passenger safety. Additionally, window film has the functions of reflecting ultraviolet rays and absorbing heat, effectively preventing the aging of interior panels and decorations caused by sun exposure. Below is additional information: 1. Functions of car window film: Car film can prevent glass from shattering. In the event of a collision, the film can slow down the speed at which glass fragments scatter. Although car glass generally has anti-shatter properties, when the glass is damaged, cracks may spread into small pieces. Applying film can better protect passengers. It also has certain UV reflection and heat absorption capabilities. High-quality films can even absorb up to 90% of UV rays, preventing interior decorations and panels from fading or aging due to sun exposure. Moreover, it can make the car slightly cooler during hot summers. 2. Disadvantages of car window film: Everything has its pros and cons. While window film effectively prevents glass shattering, it can also affect the driver's visibility and field of vision. Especially for cars with dark-tinted films, drivers may experience a hazy sensation when looking ahead, and prolonged use can even lead to visual fatigue. Under sunlight, windows with sun films may produce refraction and reflection phenomena, affecting the visibility of other drivers. Although the film reduces UV exposure and protects the health of drivers and passengers, it also increases the likelihood of eye fatigue for the driver.

17

0

Share

Will the position lights turn on when the low beam is activated?

When the low beam is turned on, the position lights will also remain illuminated. In current vehicle models, the first position on the switch controls the position lights, and turning the switch to the second position activates the low beam while keeping the position lights on. This means that to turn on the low beam, you must first activate the position lights, as the switch operates incrementally. Below is additional information about vehicle lights: 1. Position lights: Also known as marker lights or clearance lights. They indicate the width of the vehicle to alert other drivers. Sometimes referred to as evening running lights, they are turned on when it is not completely dark. The next position on the switch activates the small lights (parking lights), and the following position turns on the headlights—low and high beams. 2. Low beam: The low beam has an illumination range of approximately 30-40 meters. Experiments show that when driving at 55 km/h at night, the braking distance after detecting an obstacle is exactly 30 meters. This means that if an obstacle is spotted within the low beam's range and braking is applied immediately, there will be no gap between the vehicle and the object.

17

1

Share

Differences Between the Lynk & Co 01 and the Volvo XC40

How to Distinguish Between Good and Bad Car Batteries?

What is traffic violation code 10393 and how is it penalized?

What do R, N, D, S mean on a car?

What is the fuel tank capacity of the Wuling Zhiguang 6376nf in liters?

Is it necessary to apply window film to a new car?

Will the position lights turn on when the low beam is activated?

How to Set Up One-Touch Window Control for the Leiling?

What Causes the Abnormal Noise After the Vehicle Shuts Off?

How to Start Without Stalling in Driving Test Part 3?

What does it mean when the yellow light in a car comes on?