Differences Between the Elysion and Viloran

1 Answers
VanMaria
07/30/25 5:22am
Here are the differences between the Elysion and Viloran: 1. The Elysion is a mid-size MPV, while the Viloran is a large-size MPV. These two vehicles differ in class, body dimensions, and powertrain configurations. The Elysion has a wheelbase of 2,900 mm, with length, width, and height measuring 4,950 mm, 1,842 mm, and 1,711 mm respectively. The Viloran has a wheelbase of 3,180 mm, with length, width, and height measuring 5,346 mm, 1,976 mm, and 1,781 mm respectively. 2. Different engines. The Viloran uses two engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. The Elysion also uses two engines: a 2.4-liter naturally aspirated engine and a 2.0-liter naturally aspirated engine. The model equipped with the 2.0-liter naturally aspirated engine is the hybrid version. 3. The hybrid version of the Elysion features Honda's i-MMD hybrid technology. The low-power 2.0-liter turbocharged engine in the Viloran delivers 186 horsepower and a maximum torque of 320 Nm, with the maximum power output achieved between 4,100 and 6,000 rpm and peak torque available from 1,500 to 4,000 rpm. The high-power 2.0-liter turbocharged engine produces 220 horsepower and a maximum torque of 350 Nm, with the maximum power output achieved between 4,500 and 6,200 rpm and peak torque available from 1,500 to 4,400 rpm. Both engines are paired with a 7-speed dual-clutch transmission.
Was this review help?
7
1
Share
More Forum Discussions

Where is the fuel pump located in a BMW X5?

BMW X5 fuel pump is located on the engine block under the hood. The maintenance methods for the fuel pump are: 1. Avoid using substances containing water; 2. Avoid using substances containing solvents; 3. Wipe the glass window of the vacuum oven clean after use; 4. Remove the rust-proof oil from the governor and the inner cavity of the fuel injection pump; 5. Use No. 0 diesel in summer and No. -10 light diesel in winter. The BMW X5 is a mid-to-large SUV with a body length, width, and height of 4909mm, 1938mm, and 1772mm respectively, a wheelbase of 2933mm, and a fuel tank capacity of 85 liters (main tank) and 60 liters (secondary tank).
13
3
Share

What does the 'One Man, One Engine' concept of Mercedes-AMG mean?

The 'One Man, One Engine' concept of Mercedes-AMG means that each engine is entirely built by a single engineer from start to finish. Taking the 2019 Mercedes-AMG as an example, it is a mid-size car with the following dimensions: length 4704mm, width 1810mm, height 1434mm, wheelbase 2810mm, minimum ground clearance 160mm, and a curb weight of 1840kg. The 2019 Mercedes-AMG is equipped with a 3.0T inline 6-cylinder turbocharged engine, delivering a maximum horsepower of 390PS, maximum torque of 520Nm, and maximum power of 287kW.
20
1
Share

Where is the production date of the Tayron located?

The production date of the Tayron can be found in the following locations: 1. Below the B-pillar on the passenger side; 2. In the upper right corner of the vehicle qualification certificate; 3. On the vehicle nameplate inside the engine compartment. Taking the 2020 Tayron as an example, it is a mid-size SUV with body dimensions of 4589mm in length, 1860mm in width, 1660mm in height, a wheelbase of 2731mm, a minimum ground clearance of 160mm, and a curb weight of 1545kg. The 2020 Tayron is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW.
4
4
Share

How to Use the Pajero Fog Lights?

Pajero fog lights are generally turned on in foggy or rainy weather when visibility is significantly affected by the weather, with the purpose of making the vehicle visible to others. Below are the usage steps: 1. First, locate the Pajero fog light switch, which is positioned near the door at knee level, below the left side of the steering wheel; 2. Then, use the switch to turn the fog lights on or off. Below is the classification of car lights: 1. Headlights: Combined headlights are located at the front of the car, primarily serving illumination and signaling purposes; 2. Taillights: Combined taillights are located at the rear of the car, mainly serving illumination and signaling purposes; 3. Turn signals: Used to indicate left or right turns to other road users. Regulations require them to be amber; 4. License plate light: The license plate light mainly illuminates the license plate, allowing people to identify the vehicle's license plate in the dark.
6
4
Share

What Causes the Buzzing Resonance at 3000 RPM in an Engine?

Engine buzzing resonance at 3000 RPM is caused by: 1. Engine knocking or misfiring; 2. Engine backfire malfunction; 3. Incorrect engine timing adjustment; 4. Failure to change engine oil; 5. Loose plastic components in the engine compartment; 6. Abnormal noises from engine belts, valves, or bearings; 7. Starter or water pump failure; 8. Faulty engine mounts; 9. Loose engine underbody shield. Solutions for engine buzzing resonance at 3000 RPM include: 1. Using substandard fuel - refill with qualified gasoline; 2. Disassembling the engine to clean carbon deposits; 3. Replacing with qualified engine oil.
1
2
Share

Can ETC be removed?

ETC can be removed after installation. However, if you remove the ETC device by yourself, it will become invalid because the ETC device has an anti-tamper function. There is a small switch on the back of the ETC electronic tag, which will automatically turn off once it is detached from the windshield. Therefore, you must bring your vehicle's registration certificate to the ETC service provider for reactivation. ETC charging principle: There will be one or more ETC lanes on the highway. Through the dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the computer network technology is used to settle accounts with the bank, achieving the purpose of paying tolls without stopping at the toll station. All of this is based on the principle of "pass first, deduct later." Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improve efficiency: The efficiency of ETC lanes can theoretically increase by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the "13th Five-Year Plan" for comprehensive transportation development: "By 2020, the ETC usage rate of road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC usage rate of passenger vehicles, efforts will also be made to promote the use of ETC by trucks in the future. There will be exploration of deep integration between the ETC system and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-to-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC applications. Precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large rearward angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: The ETC electronic tag requires power, but generally, it does not need to be charged or have its battery replaced because there is a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper rod connected to a switch. Once the electronic tag is installed, the windshield will press the anti-tamper rod in. If it is removed arbitrarily, the anti-tamper rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead. The recognition speed for ETC lanes is 20 kilometers per hour. If the speed is too fast, the vehicle's device information cannot be read, resulting in a failed charge. When using a debit card bound to ETC, insufficient balance will also cause the charge to fail.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.