···
Log in / Register

Differences between the 2017 A4L Plus and the A4L?

3 Answers
Aaron
09/05/25 6:45am
The difference between the Audi A4 Plus and the A4 lies in the fact that the Audi A4 Plus is a station wagon version developed on the Audi A4 platform, while the Audi A4 is a sedan. Additional information is as follows: 1. Dimensions: The Audi A4L measures 4818/1843/1432mm in length, width, and height, with a wheelbase of 2908mm. It features a new hexagonal grille design and sharp headlight clusters. 2. Interior: The dashboard is tilted towards the driver's side, and high-end models are equipped with a full LCD instrument panel. Depending on the configuration, the new car will come with xenon headlights, matrix LED headlights, chrome trim on the lower grille of the bumper, a panoramic camera, adaptive cruise control, front and rear sport bumpers, a panoramic sunroof, and a shark fin antenna. 3. Powertrain: It is equipped with a 2.0T engine (low/high power) and a 1.4T engine. The maximum power outputs of the 2.0T engine are 140kW (190 horsepower) and 185kW (252 horsepower), respectively. The low-power 2.0T model is labeled as 40TFSI, while the high-power 2.0T model is labeled as 45TFSI. The 1.4T engine has a maximum power output of 110kW (150 horsepower). The transmission system is paired with a Stronic 7-speed dual-clutch transmission.
Was this review help?
2
2
Share
KeiraDella
09/17/25 7:04am
I recently researched the differences between the 2017 Audi A4L and the A4L Plus, and found that the upgrades are mainly in the configurations. The Plus version comes standard with matrix LED headlights, which are brighter and more intelligent, making nighttime driving much safer. It also includes the Audi virtual cockpit, a fully digital instrument cluster that displays maps and driving information, making operations super convenient and eliminating the need to check your phone. In terms of safety, the Plus version shows significant improvements, with pre-collision systems, lane assist, and rear side airbags all as standard features, providing more peace of mind when driving on highways or in rainy and foggy conditions. The powertrain and chassis remain largely unchanged, both equipped with a 2.0T engine, so the driving experience is quite similar, but the Plus version offers a stronger sense of technology. The Plus version is slightly more expensive, but these standard features save on optional costs, making it a good value in the long run. For those who love high-end technology, I recommend going straight for the Plus—it’s more stylish and comfortable to drive.
Was this review help?
20
3
Share
Expand All
DeSabrina
10/31/25 7:33am
When I was comparing these two models before buying a car, the A4L Plus comes with more standard features compared to the base A4L. Matrix headlights and the virtual cockpit are included in the Plus, while they might be optional extras on the standard version, making the Plus’s starting price higher but more worthwhile. The Plus also offers better safety with the addition of an automatic braking system, reducing the risk of rear-end collisions in traffic. Both models share the same 2.0T engine, delivering similar smooth performance. The price difference ranges from a few thousand to ten thousand, depending on the configuration. If you’re on a tight budget, the base A4L is sufficient, but if you want to avoid the hassle of optional add-ons, the Plus is a more all-inclusive choice. In the used car market, the Plus holds its value slightly better due to its newer features, though maintenance costs are similar. Overall, the choice depends on your budget and needs—go for the Plus if you want high-tech features, or the standard version for affordability.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What Brand is Baodiao Motorcycle?

Baodiao Motorcycle is produced by Jiangsu Baodiao Motor Vehicle Co., Ltd., a state-certified manufacturer of motorcycles and electric vehicles. Below is relevant information about Jiangsu Baodiao Motor Vehicle Co., Ltd.: 1. Introduction to Jiangsu Baodiao Motor Vehicle Co., Ltd.: The company was registered on October 27, 2000, with the Xishan District Market Supervision and Administration Bureau in Wuxi City. Its business scope includes motorcycles, power-assisted bicycles, electric vehicles, engines and their accessories, as well as agricultural and forestry machinery. 2. Disadvantages of Jiangsu Baodiao Motor Vehicle Co., Ltd.: Essentially, this company lacks independent R&D capabilities. The models it produces are primarily low-tech, low-value-added, and low-priced products, targeting the mass-market vehicle sector. Its products are mainly sold in rural areas and underdeveloped regions in Asia, Africa, and Latin America.
9
3
Share

How to Connect Bluetooth in an Older Model Van?

In older model vehicles, Bluetooth can typically be activated through the central control screen. Alternatively, check the dashboard for any of the following symbols: Bluetooth logo, "BlueTooth," or "BT." If present, pressing it will enable Bluetooth. Below is an introduction to the car Bluetooth system: 1. Overview of Car Bluetooth System: The Bluetooth technology in car systems is an extension of mobile phone Bluetooth technology, sharing the same transmission system. Car Bluetooth is an in-vehicle wireless hands-free system designed based on wireless Bluetooth technology. 2. Functions of Car Bluetooth System: Its primary function is to connect with a mobile phone via Bluetooth for hands-free calls while driving, freeing up the driver's hands and reducing the risk of traffic accidents. Most current car Bluetooth systems support features like conference calls and MP3 playback, with simple operation and the ability to connect multiple phones simultaneously, significantly enhancing driving safety.
18
4
Share

Why does the car air conditioner not cool when driving on the highway?

Introduction to the reasons why the car air conditioner does not cool when driving on the highway: 1. Reason one: Lack of refrigerant. Car air conditioners generally need to add refrigerant every 2~3 years. 2. Reason two: Damaged air conditioner flap. The failure of the air conditioner flap motor is relatively rare. The flap motor is usually located in the lower middle part of the instrument panel and serves as the main switch for the air conditioner vents. 3. Reason three: The condenser is too dirty. The purpose of cleaning the radiator and condenser is mainly for heat dissipation. If spring willow catkins and poplar catkins accumulate on the condenser, it can cause phenomena such as excessive engine temperature or poor air conditioning performance. 4. Reason four: Damage to the air conditioner compressor, throttle valve, or expansion valve. Malfunctions in the expansion valve and throttle valve directly lead to poor air conditioning performance. These checks are relatively complicated and require professional repair shops for repairs.
8
3
Share

What is the fuel consumption of the Jinjila?

Fuel consumption is calculated by dividing the amount of fuel added by the distance traveled. Here are the relevant details: 1. Calculating fuel consumption: The first method involves using the vehicle's dashboard records. After resetting the mileage data, the onboard computer automatically calculates the vehicle's fuel consumption based on the recorded mileage and fuel consumption data. The second method involves recording the distance traveled after a single refueling and then calculating the vehicle's fuel consumption. The fuel consumption obtained by both methods represents the average fuel consumption of the vehicle. 2. Trip fuel consumption: Trip fuel consumption is obtained by integrating the instantaneous fuel consumption to get the total fuel consumed during the trip, then dividing it by the trip distance. As for the trip distance, it can be simply obtained by integrating the vehicle speed or by setting a variable to record the trip distance, which updates along with the odometer.
8
1
Share

What are the vehicle parking management regulations?

Here is the relevant introduction about vehicle parking management regulations: 1. Each property management office shall carry out management work for vehicles within the managed property project area in accordance with laws and regulations: For those requiring vehicle storage fees, they are responsible for collecting the fees according to the pricing department's regulations. 2. Each property management office should be familiar with the vehicle flow and parking space situation in the community (building): Reasonably arrange and prioritize the use of parking spaces for property owners. They are responsible for directing vehicle movement and parking within the area, maintaining traffic and parking order in the community (building). 3. Motor vehicles driving within the area: The speed shall not exceed 15 kilometers per hour, and honking, test driving, repairing, or practicing driving are prohibited. Parking is not allowed on sidewalks, roadways, or fire lanes.
20
1
Share

Does installing the license plate with a nut spacer have any impact?

No impact. Here are the relevant details: 1. Function of the nut: The primary purpose of the license plate nut is to secure the license plate. Unlike regular screws, the ones used for license plates are anti-theft screws. Once installed, these screws cannot be unscrewed. The only way to remove the license plate is by destroying the anti-theft screw. This measure is designed to prevent vehicle owners from changing their license plates without authorization. 2. Identification on the nut: Each license plate nut has a small identification mark on its top. This mark corresponds to the jurisdiction where your vehicle was registered. For example, if your license plate starts with "Yue A," then the mark on the nut should also be "Yue A." If these marks do not match, you may face corresponding penalties.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.