···
Log in / Register

Differences Between Refrigerated Trucks and Cold Chain Trucks?

1 Answers
DiHaley
07/24/25 6:38am
Cold chain trucks and refrigerated trucks have some fundamental differences. The scope of cold chain trucks is broader, as they must ensure low-temperature transportation throughout the entire transportation process, while refrigerated trucks primarily focus on maintaining the low-temperature freshness of goods inside the vehicle. Cold chain trucks and refrigerated trucks can be considered the same type of transportation, but they differ in scope. Here are the specific details about refrigerated trucks and cold chain trucks: 1. Cold chain trucks mainly refer to transportation that maintains a certain temperature for the goods throughout the entire transportation process. Whether during loading and unloading, changing transportation methods, or replacing packaging equipment, the temperature can be maintained. 2. Refrigerated trucks are primarily used to transport goods that require freshness or freezing temperatures. They are specialized transport vehicles equipped with refrigeration units and polyurethane-insulated compartments. They can be classified based on the manufacturer, chassis load capacity, and compartment type. 3. During refrigerated transportation, the transport vehicle must have excellent performance, maintaining not only the required low temperature but also a stable temperature, which is especially crucial for long-distance transportation. For the entire cold chain transportation, it can be subdivided into freshness, chilled, and frozen categories, so the freezing effect of cold chain trucks is more important. In terms of transportation distance, refrigerated trucks are suitable for long-distance transportation of large quantities of goods, while insulated trucks are suitable for short-distance urban transportation of smaller quantities.
Was this review help?
11
3
Share
More Forum Discussions

What is the difference between mechanical disc brakes and hydraulic disc brakes?

The differences between mechanical disc brakes and hydraulic disc brakes are as follows: Difference in working medium: Hydraulic disc brakes use oil as the medium, utilizing the expansion of oil to drive the operation of the brake calipers. The oil used in hydraulic disc brakes is generally lightweight, with fewer impurities, good transparency, and light weight. Structural difference: Hydraulic disc brakes generally consist of three major components: the brake lever, the hose, and the oil cylinder, while mechanical disc brakes use a steel cable to connect the brake lever to drive the caliper system for braking. Difference in working principle: Hydraulic disc brakes adopt a dual-sided floating braking method, where both brake pads move simultaneously, fully contacting both sides of the disc to generate greater friction, enabling rapid braking. Mechanical disc brakes use a steel cable to connect the brake lever to drive the caliper system for braking. Most mechanical disc brakes typically use a single-sided floating caliper braking system, where one side remains stationary while the other side compresses, thereby tightening the caliper gap to create friction against the disc for braking.
12
5
Share

Is oil leakage a common issue with CFMoto?

Oil leakage is a common issue with CFMoto. The relevant introduction of CFMoto is as follows: Introduction 1: CFMoto is a national high-tech enterprise specializing in the R&D and manufacturing of large-displacement water-cooled power technology. Its main business includes the R&D, manufacturing, and sales of all-terrain vehicles, motorcycles, and aftermarket accessories. Introduction 2: The NK family series of street bikes, the touring model 650MT, and the road touring model 650TR-G launched by CFMoto have become industry benchmarks leading the leisure large-displacement water-cooled motorcycle sector. Introduction 3: CFMoto's strengths lie in water-cooled engines and scooters, especially larger water-cooled scooters, as well as some ATV models. The recently launched water-cooled fuel-injected models, such as the Lingpao, are also distinctive products, all positioned in the high-end performance line.
13
0
Share

How many tons can an eight-wheeler carry?

The eight-wheeler truck crane is the most purchased model by users, featuring wide applications, heavy load capacity, good passability, and high cost-effectiveness. According to national regulations, an eight-wheeler truck crane can generally carry about 9-10 tons of cargo without overloading. If overloaded within the vehicle's tolerance range, it can carry about 25 tons. The relevant introduction of the eight-wheeler is as follows: Introduction 1: Eight-wheelers are generally only available for large trucks, commonly referred to as double-axle vehicles, with two rows of wheels at the back, four wheels per row, and two wheels on each side. Introduction 2: The eight-wheeler is also known as an eight-wheeler dump truck or double-axle vehicle, referring to a vehicle that unloads cargo by hydraulic or mechanical lifting, also known as a tipper. It consists of components such as the vehicle chassis, hydraulic lifting mechanism, cargo compartment, and power take-off device.
16
4
Share

What are the requirements for taking the second and third driving test subjects consecutively?

After passing the first subject, you can schedule the second subject and the third subject (road test) simultaneously. Once the appointment is successful, you can take the tests consecutively. Below are some tips for the third subject test: 1. Follow the instructions: Listen carefully to the voice prompts during the third subject test and act accordingly. Remember not to perform any actions before the voice prompt ends; always wait until the prompt is complete before proceeding to the next step. 2. Pay attention to special zones: In many areas, voice prompts no longer remind candidates of special zones such as school zones, bus stops, and crosswalks. However, candidates must still perform corresponding deceleration or yielding actions based on the project signs and road markings. For school zones, apply the brakes within 10 meters of the sign, keeping the speed below 30 km/h. For bus stops, apply the brakes within 10 meters of the sign, keeping the speed below 30 km/h. For crosswalks, decelerate by applying the brakes within 30 meters before the crosswalk, and stop to yield if pedestrians are crossing.
13
3
Share

What brand is NGK spark plug?

NGK is actually a brand originating from Nagoya, Japan. Established in 1936, it initially focused on manufacturing spark plugs. Later in 1949, NGK Company expanded into NTK precision ceramics manufacturing. Over the years, NGK's business has expanded beyond Japan's limited territory and reached out to the world. The characteristics of NGK spark plugs are as follows: Feature 1: Ultra-wide range spark plugs. To dissipate a large amount of heat quickly, copper cores are embedded near the front end of the center electrode, creating a copper-core embedded structure. This design achieves ultra-wide range spark plugs that are resistant to burning and carbon deposits. Feature 2: Uses new ceramic high-alumina ceramics as the insulator. It has excellent insulation at high temperatures, ensuring reliable spark generation. It also has outstanding thermal conductivity, preventing excessive combustion, and strong resistance to thermal shock (rapid heating and cooling), along with high mechanical strength. Feature 3: Precision construction with excellent airtightness. The insulator and main metal are connected using special powder, ensuring excellent airtightness and a robust structure.
10
3
Share

What Causes the Brake Noise in Mercedes-Benz GLC?

Mercedes-Benz GLC brake noise is caused by rust or hard spots on the brake discs, which usually occurs when the vehicle first starts moving and improves after a few brake applications. Below is relevant information: 1. The break-in period for a new car, where the break-in of the brake pads is a crucial part. Typically, after driving a few hundred kilometers, the brakes will feel more comfortable. Newly replaced brake pads also need a break-in period to better integrate with the old discs. Right after replacement, the brakes may feel very stiff, and it usually takes a few hundred kilometers of driving before they feel better. 2. For vehicles experiencing noise due to incomplete break-in, some owners resort to aggressive braking while driving to quickly break in the brakes. While this can accelerate the break-in process in a short time, it leads to more severe wear on the brake pads, effectively reducing their lifespan. Therefore, it is recommended to drive for a while longer and observe the situation, rather than artificially forcing excessive wear on the brake pads.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.