Differences between Audi S4 and RS4?

1 Answers
EllaRose
07/28/25 5:48pm
Audi S4 and RS4 differ in powertrain, vehicle type, and body size. More details about the differences between Audi S4 and RS4 are as follows: 1. Different engines in the powertrain: The Audi S4 uses a 3.0-liter turbocharged engine, while the Audi RS4 is equipped with a 2.9-liter twin-turbocharged engine. The RS4's engine delivers a maximum power of 331 kW and a maximum torque of 600 Nm, with a maximum power rpm range of 5700 to 6700 rpm and a maximum torque rpm range of 1900 to 5000 rpm. Additionally, it features an aluminum alloy cylinder head and block. 2. Different vehicle types and performance: The Audi RS4 is a station wagon, whereas the S4 is a sedan. Moreover, the S4 is a regular sports car, while the RS4 is a track-oriented sports car. 3. Different body dimensions: The Audi S4 measures 4770 mm in length, 1847 mm in width, and 1404 mm in height, with a wheelbase of 2825 mm. The Audi RS4 measures 4781 mm in length, 1866 mm in width, and 1404 mm in height, with a wheelbase of 2826 mm.
Was this review help?
4
1
Share
More Forum Discussions

What is the total weight of the Roewe RX5?

The curb weight of the Roewe RX5 two-wheel-drive version is 1,592 kilograms; the four-wheel-drive version has a curb weight of 1,680 kilograms. Below is an introduction to the Roewe RX5: 1. The Roewe RX5 is positioned as a compact SUV. 2. The Roewe RX5 is equipped with a 1.5-liter turbocharged engine across all models. The engine has a maximum power output of 124 kW, a maximum torque of 250 Nm, a maximum power speed of 5,500 rpm, and a maximum torque speed ranging from 1,700 to 4,300 rpm. The engine is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission. The dual-clutch transmission offers fast gear shifts and high transmission efficiency, making it well-suited for use with small-displacement turbocharged engines. 3. The Roewe RX5 features a MacPherson independent front suspension and a multi-link independent rear suspension. The multi-link independent suspension enhances wheel contact with the ground, improving traction and handling.
11
5
Share

How to Remove the Wrench Warning on Volkswagen Bora?

The "wrench" warning is a maintenance reminder function set by Volkswagen to alert owners to perform scheduled maintenance based on mileage. Steps to remove the Bora wrench warning: 1. Turn off the ignition. 2. Press and hold the 0.0 button at the bottom right corner with your left hand. 3. Turn on the ignition with your right hand (do not start the engine), keeping the left hand pressed. 4. A non-flashing wrench symbol will appear on the dashboard. 5. Release the left hand and press the button at the bottom left corner once to make the wrench symbol disappear. Additional information about the Volkswagen Bora: 1. The Bora is the first independently designed model by FAW-Volkswagen, officially launched in China in 2001. 2. The Bora has a body size of 4523*1775*1467mm with a wheelbase of 2610mm. It is equipped with the EA211 series engine, offering 1.6L and 1.4TSI power options, paired with a 5-speed manual, 6-speed Tiptronic automatic, or 7-speed DSG dual-clutch automatic transmission.
3
0
Share

Where is the Chevrolet Oil Pressure Sensor Located?

For the Chevrolet Sail, the oil pressure sensor is located under the hood, inside the engine compartment, at the upper left corner of the engine near the battery. For the Chevrolet Cruze, the oil pressure sensor is installed to the right of the water pump. Classification of oil pressure sensors: 1. Semiconductor piezoresistive: Semiconductor piezoresistive sensors utilize the piezoresistive effect of semiconductors. Their main characteristics include high sensitivity, a wide measurement range, and a strong output signal, making them easy to integrate. However, their resistance to oil contamination and particle influence is poor, requiring isolation from the medium to achieve accurate results. 2. Traditional elastic strain: Strain-type sensors feature a wide measurement range, high precision, good stability, and a long service life, capable of withstanding high temperatures, high speeds, high pressure, and vibrations, making them well-suited for automotive testing environments. The output signal amplitude of these sensors changes minimally, but they require temperature compensation in environments with drastic temperature changes, which is challenging. 3. Thick film pressure: Thick film pressure sensors are a new type of sensor. This form avoids the aging issues common in stress-type force-sensitive sensors due to adhesive processes. Thick film strain resistors offer stable performance, high-temperature resistance, and a temperature coefficient that is an order of magnitude smaller than that of diffused silicon.
4
2
Share

How to Read the Fuel Gauge on the Buick Excelle?

The Buick Excelle features an analog fuel gauge where the needle pointing to 'F' indicates a full tank, and as it moves closer to 'E', it signifies decreasing fuel levels. The fuel gauge is divided into 8 segments, with a full tank representing 100%, and each segment approximately 12.5%. Below is additional information about the fuel gauge: 1. The vehicle's fuel gauge is an indicator that displays the remaining fuel level, serving as a crucial reference for drivers to determine when to refuel. 2. Understanding the structure and symbols of the fuel gauge helps drivers accurately assess the remaining fuel or determine if the fuel gauge is functioning properly. 3. It is advisable for car owners to develop good habits when refueling; refuel when the fuel light comes on and avoid waiting until the tank is nearly empty. Due to residual fuel in the tank, the amount added may be less than the specified tank capacity. 4. Avoid overfilling the tank, especially in summer when fuel expands. The fuel supply system may deliver excess fuel due to vaporization and expansion pressure, leading to unnecessary fuel wastage. 5. The best time to refuel is early in the morning. Since fuel trucks typically deliver fuel to storage tanks during the day, stirring up settled impurities, refueling in the afternoon or evening may introduce these impurities into the vehicle. After a night of settling, the fuel in the morning contains the least impurities.
1
5
Share

What year is the eighth-generation Accord model?

The eighth-generation Accord was produced from 2008 to 2012. Here is an introduction to the eighth-generation Accord: 1. The development and design concept of the eighth-generation Accord was "Advanced-Powerful," meaning the perfect integration of "forward-looking technology and dynamic power." Based on this concept, Honda R&D gathered the latest technologies to develop a new technical platform, which reflected the most perfect interpretation of Honda's global DNA in terms of space design, safety, power performance, handling, and environmental protection, among many other aspects. The eighth-generation Accord completely surpassed and broke through itself, claiming to be the "strongest Accord in history." 2. The eighth-generation Accord is the perfect embodiment of Honda's technological achievements and the pinnacle of the Accord brand's history. In addition to being technologically superior to its competitors, it surpassed its peers in many aspects, including the size of its exterior and interior space, as well as the luxury of its interior and configurations. In terms of styling, the eighth-generation Accord followed the "strong and powerful" design philosophy, embodying a grand, high-end, advanced, and prestigious design direction. The front face design was more heroic, with angular headlights, a grille, and flared fenders, showcasing a dynamic and capable temperament. Particularly, the waistline running from the front to the rear of the car body, like a stroke in Chinese calligraphy, was strong and powerful yet dynamic, making it unforgettable.
1
4
Share

What Causes a Buick LaCrosse to Suddenly Stop Cooling?

Air conditioning failure to cool could be due to a lack of refrigerant (also known as Freon), which results in insufficient refrigerant in the system's pipelines, reduced pressure, and diminished heat absorption. Additionally, a dirty or clogged air filter and condenser can significantly impair cooling performance. Below is an introduction to the possible reasons for air conditioning not cooling: 1. Reason One: If the air conditioning compressor is not working, it can lead to poor cooling performance. There are many potential causes, with circuit issues being among the most common. A preliminary check can be done by directly powering the compressor's electromagnetic clutch to see if the compressor is functioning properly. 2. Reason Two: Generally, compressors rarely fail directly. If the issue lies with the compressor, it is advisable to leave it to professionals. A loose compressor drive belt can cause slippage during operation, reducing transmission efficiency, lowering compressor speed, and decreasing refrigerant delivery, ultimately leading to the air conditioning not cooling. 3. Reason Three: If the compressor drive belt is too loose, it should be tightened. If the belt cannot be turned by hand, it indicates excessive tightness and should be loosened slightly. If tightening does not resolve the issue or if the belt shows signs of cracking or aging, it should be replaced with a new one.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.