Difference Between Volvo B4 and B5?

2 Answers
SanDamian
07/29/25 7:34pm
Volvo B4 and B5 differences are as follows: 1. Engine difference: The difference lies in the engines. The Volvo B5 engine is equipped with a 48V mild hybrid system, while the B4 engine does not have this system. The B5 engine also features an improved auto start-stop system. The B4 has a maximum horsepower of 254 hp, while the B5 has 250 hp. 2. Exterior difference: In terms of appearance, the front grille is flat and wide, filled with a vertical waterfall-style mesh pattern. The split-design headlight clusters adopt Thor's Hammer design language with LED light sources, offering high recognition. The bottom part features a horizontally spanning chrome trim across the front, enhancing the overall unity of the front end. On the side profile, there are sharp but not overly prominent character lines running from front to rear, combined with slightly recessed door panels, smooth body lines, and a slightly sloping rear roofline, making the entire vehicle appear more dynamic.
Was this review help?
1
0
Share
VanMicah
08/14/25 2:36pm
As a car enthusiast who frequently test drives vehicles, I've found that the main difference between the Volvo B4 and B5 lies in their power performance. The B5 has noticeably higher horsepower, faster acceleration, and a stronger sense of push-back, making it particularly effective when overtaking on the highway, while the B4 is smoother and more suitable for city commuting. Both use mild hybrid systems, offering quiet starts and fuel efficiency, with daily driving fuel consumption being quite similar—though the B4 might save a tiny bit more. From my personal driving experience, if you love a sporty feel or frequently drive long distances, the B5 is definitely the top choice, even though it's a bit more expensive. But if you prioritize stability and cost savings, the B4 is also outstanding. Additionally, the B5 has a more composed engine sound at high RPMs and better handling stability, offering more driving pleasure over time. In short, the choice depends on your driving habits—try test driving both models before making a decision.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

What Causes the Hood Resonance Noise?

The causes of hood resonance noise include engine issues, shield plate problems, and control system malfunctions. Engine Aging: If the vehicle has been in use for a long time, the rubber of the engine mounting pads may fatigue and age due to high temperatures, easily leading to resonance. In severe cases, there may also be bumping and friction noises. Engine Misfire: Engine misfire can also cause resonance phenomena in the engine. Shield Plate Deformation: Deformation of the engine shield plate or improper installation can cause engine resonance. This situation is relatively common and easy to resolve. Control System Issues: Another possible cause is vehicle resonance due to problems with the idle control system.
2
5
Share

What is the safety device of the transmission operating mechanism?

There are two types of safety devices for the transmission operating mechanism: the self-locking device and the interlocking device. The following is their introduction: 1. The self-locking device of most transmissions consists of a self-locking steel ball and a self-locking spring. 2. The interlocking device is mainly composed of interlocking steel balls and interlocking pins, that is, elements such as balls, pins, and sliders are added between the shift fork shafts, or elements such as frame plates are set to limit the movement trajectory of the shift lever and also prevent the engagement of two gears simultaneously. 3. The upper surface of each shift fork shaft has three grooves distributed along the axial direction. When any shift fork shaft moves axially to the neutral or a working gear position, one groove must be exactly aligned with the self-locking steel ball.
15
5
Share

How Much Torque Can a Dual-Clutch Transmission Withstand?

Dual-clutch transmissions can withstand 250 torque. Cool the transmission promptly: Dual-clutch transmissions are not suitable for frequent starts, prolonged low-speed driving, or stop-and-go traffic, as they are prone to overheating, which can lead to malfunctions. Once the vehicle's computer issues a warning, it is essential to stop immediately to cool down the transmission. Use lower gears: In unavoidable traffic congestion, try to use lower gears for following the traffic, including manual mode or S mode. This can significantly prevent the clutch from overheating due to the transmission's shifting mechanisms constantly changing.
7
0
Share

Is the Right Reverse Parking Narrowing Due to Steering Too Early or Too Late?

The reason for the right side narrowing during right reverse parking is steering the wheel too early. Here are the precautions for reverse parking: To perfectly enter the parking space during reverse parking: The timing of turning the steering wheel clockwise is crucial—it should be neither too early nor too late. If steered too early, it's easy to hit the right parking line; if too late, it's easy to hit the left parking line. This requires accurate judgment. Keep the speed slow: During reverse parking, the most important thing is to maintain a slow speed. If there's any deviation while reversing, the car's body may tend to touch the line. Timely detection allows for corrections, such as promptly straightening the steering wheel. However, if driving too fast, there won't be enough time to make adjustments.
12
0
Share

What brand of nanny vans do celebrities use?

Celebrity nanny vans are typically the Toyota Alphard. Introduction to Toyota's main vehicle models: Corolla, Camry, ES, Avalon, RAV4, Highlander, etc. Among these, the nanny van model is generally the Toyota Alphard. Industries Toyota is involved in: Toyota's product range spans automobiles, steel, machine tools, pesticides, electronics, textile machinery, fiber products, household goods, chemicals, chemical engineering, construction machinery, and the construction industry. In 1993, its total sales ranked 5th among industrial companies worldwide. The company produced 4.45 million vehicles that year, accounting for 9.4% of the global automotive market.
2
4
Share

How to use the auto switch for car windows?

To use the auto function for car windows: Simply press the window open or close button once, and the window will open or close automatically without the need to hold the button down. 'Auto' translates to 'automatic' in English. The car function buttons with auto include the following 6 features: 1. Automatic air conditioning: Press the AUTO button to activate the automatic air conditioning. After manually setting the temperature, the system enters an automatic temperature regulation state, controlling the air direction, blower speed, compressor operation, and vent temperature to maintain a comfortable cabin temperature. 2. Automatic headlights: Rotate the light switch to align with the AUTO mark, and the light control enters automatic mode. In this mode, a light sensor on the dashboard detects low external light conditions, such as entering tunnels, underground parking lots, or unlocking the car at night, and automatically turns on the daytime running lights or headlights to prevent delays or forgetting to turn them on. 3. Automatic wipers: Move the wiper switch to the AUTO position to activate automatic mode. A sensor on the windshield detects rainfall intensity, and the system automatically adjusts the wiper speed. 4. AUTOHOLD: This is the automatic parking function. Press the AUTOH button to turn on the system (indicated by the button light). When the vehicle frequently stops and starts, activating this function allows the system to automatically hold the brake after pressing it for more than 3 seconds, eliminating the need to keep the brake pedal pressed. To move forward, simply press the accelerator, and the parking system will release automatically. 5. Automatic anti-glare: This feature usually doesn’t have an AUTO label, but an indicator on the rearview mirror signifies its presence. During night driving, if a following vehicle shines bright lights or high beams, the system automatically adjusts the reflection to prevent glare and maintain visibility. 6. One-touch up/down: The auto button on the driver’s side window switch indicates that pressing or pulling the switch once will automatically raise or lower the window completely without holding the button. To stop the window during operation, press the switch again.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.