···
Log in / Register

Difference Between N Gear and P Gear?

1 Answers
VonArya
07/28/25 9:39pm

Here are the differences between the P gear and N gear in a car: 1. Different types: P gear is called the parking gear, while N gear is called the neutral gear. 2. Different functions: P gear is suitable for parking and stopping, while N gear is used for short-term stops. 3. Different clutch control: In P gear, the parking gear is partially locked inside the transmission, so the vehicle has a certain parking effect on flat ground without stepping on the brake. N gear is the neutral gear, where the engine and the drive shaft are completely separated at the transmission position, with no connection. Here is an introduction to automatic transmission: 1. As the name suggests, automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, there are six gear positions in an automatic transmission car, from top to bottom: P, R, N, D, S, L. 2. Driving an automatic transmission car only requires the use of the parking gear P, reverse gear R, neutral gear N, and drive gear D to fully meet the needs of general driving. If encountering some special driving environments, other functional gears may be needed. Therefore, if the correct control method is chosen, an automatic transmission car can perform better than a manual transmission car.

Was this review help?
8
2
Share
More Forum Discussions

Does a motor vehicle receive penalty points for violating a prohibition sign?

Yes, penalty points are given. If you see a prohibition sign while driving and still enter the area inside the outer ring road, it is called violating the instructions of the prohibition sign, resulting in a deduction of 3 points. Introduction to prohibition signs: Prohibition signs are signs that prohibit or restrict the traffic behavior of vehicles and pedestrians. Their shape is usually circular, with some being octagonal or equilateral triangles with the vertex pointing downward. Their color is usually white background, red circle, red diagonal bar, and black pattern. Function of prohibition signs: The sign prohibiting motor vehicle entry is one of the no-entry signs, indicating that all types of motor vehicles are prohibited from entering. This sign is placed at the entrance of the road section where motor vehicle traffic is prohibited.
19
3
Share

Can I Deduct Another 6 Points After Having 6 Points Deducted Through Traffic Law Study?

After having 6 points deducted through traffic law study, you cannot obtain additional point deductions through this method. Relevant regulations: According to the rules of point deduction through traffic law study, drivers can accumulate a maximum deduction of 6 points in the current scoring cycle. After deducting 6 points, you must wait until the next scoring cycle to reapply. Accumulating 12 points: According to platform rules, if a driver has two or more full-point records in the current or previous scoring cycle, or has accumulated 12 points, they cannot apply for point deduction through traffic law study. If a driver deducts 6 points through traffic law study and then gets another 6 points deducted, they cannot apply again in the next scoring cycle.
20
0
Share

What are the symptoms of a faulty clutch pump?

It may cause the clutch pedal to not disengage properly or become excessively heavy when pressed, especially during gear shifting. You may experience difficulty in shifting gears, incomplete disengagement, and occasional oil leakage from the slave cylinder. Once the clutch slave cylinder fails, it will most likely require replacement of the entire assembly. Introduction to the clutch pump: The clutch master cylinder and slave cylinder function as two hydraulic cylinders. Working principle of the clutch pump: The master cylinder has two oil pipes, while the slave cylinder has only one. When the clutch pedal is depressed, pressure from the master cylinder is transmitted to the slave cylinder, which then activates. The release fork separates the clutch pressure plate and disc from the flywheel, allowing gear shifting to occur. When the clutch pedal is released, the slave cylinder stops working, allowing the clutch pressure plate and disc to re-engage with the flywheel, thus continuing power transmission. The oil in the slave cylinder then flows back into the reservoir.
4
2
Share

Will Lead-Acid Batteries Reduce Mileage in Winter?

Lead-acid batteries will reduce mileage in winter. Lower temperatures in winter can affect the driving range, but the exact amount of mileage reduction depends on factors such as temperature and usage habits. Below are the relationship between range and temperature and the reasons for the range reduction: Relationship between range and temperature: Generally, for every degree drop in temperature, the battery's capacity decreases by about 1%, leading to a corresponding reduction in range. The specific mileage reduction can be calculated based on the data displayed by the vehicle's onboard computer. Reasons for reduced range in low temperatures: The lower the temperature, the harder it is for the electrolyte in the battery to diffuse, and the slower the chemical reaction rate of the active materials at both electrodes becomes, resulting in a drop in battery voltage.
17
0
Share

What is the correct procedure for jump-starting a car?

The correct procedure for jump-starting a car is: Park both vehicles facing each other and prepare two jumper cables. Open the hoods and connect the positive and negative terminals of both car batteries using the jumper cables—red to positive and black to negative. Start the rescue vehicle and let its engine idle. Attempt to start the stalled vehicle. If the battery is dead, the car should start quickly, and the alternator will begin charging the battery. Precautions for jump-starting: Before connecting the cables, ensure the engine is turned off. Follow the connection steps strictly: connect the positive terminal first, then the negative, and ensure the positive and negative terminals of both cars do not touch. The disconnection sequence is the reverse of the connection sequence—remove the negative cable first, then the positive. When purchasing jumper cables, choose genuine, quality-assured products. Opt for cables with an outer diameter of at least 10mm and a length of around 3 meters.
17
3
Share

Can Temporary License Plates Be Used Across Restricted Zones?

Temporary license plates are restricted to designated zones and cannot be used across zones. New vehicles using temporary plates must not exceed 15 days, and owners should promptly apply for official license plates from the vehicle management authority. Introduction to Temporary License Plates: Automobile temporary license plates refer to provisional vehicle movement permits issued by the public security vehicle management department before formal registration due to pending procedures. Penalties for Using Non-Cross-Zone Temporary Plates Beyond Designated Areas: There are two types of temporary plates: one is restricted to the local jurisdiction, while the other allows inter-provincial travel. Using blue-background temporary plates beyond designated zones may result in vehicle impoundment, fines, and a 12-point deduction. Brown temporary plates, however, permit cross-zone travel.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.