Difference between Jiangyin Convenient and Jiangyin?

1 Answers
DelColton
07/29/25 11:06pm
Jiangyin Convenient and Jiangyin difference: Jiangyin Convenient buses are intercity buses, which have stops like regular buses, making them convenient for short trips within the city. Jiangyin main buses are direct, with no stops in between, going straight to the terminal. The comprehensive three-dimensional transportation network plan of Jiangyin City signifies the future large-scale planning and direction of Jiangyin's transportation, including urban and suburban railways and connections with surrounding regional rail lines. In fact, the long-term plan for urban and suburban railways can be summarized as follows. The first priority is to establish intercity rail connections between the three cities of Xicheng, Jingcheng, and Zhangcheng, then begin planning east-west intercity rail lines between Changcheng and Zhangcheng, and finally plan the southern urban rail line of Jiangyin. The urban rail development will first focus on north-south connections, then east-west, and finally revolve around the planning of Xiakewan Science City.
Was this review help?
2
5
Share
More Forum Discussions

What is the reason for the teapot-shaped light on the car coming on?

The reasons for the engine oil light coming on are as follows: 1. Excessive oil viscosity: The viscosity of the oil is closely related to its quality. Higher viscosity means better resistance to high temperatures, but this does not mean the higher the viscosity, the better. You should use an oil grade that matches your engine. 2. Pressure relief valve blockage or improper adjustment: To prevent excessive oil pressure in the lubrication system, which increases engine power consumption and causes oil leaks at sealed connections, a pressure relief valve is installed on the main oil passage or oil pump. Its function is to limit the oil pressure in the lubrication system to prevent it from exceeding the specified value. A faulty pressure relief valve can lead to abnormal oil pressure, causing the oil light to come on. 3. Insufficient oil level: If the oil level is insufficient, the oil pump's output will decrease or fail to pump oil due to air intake, leading to a drop in oil pressure. The crankshaft and bearings, as well as the cylinder liners and pistons, will experience increased wear due to poor lubrication.
17
0
Share

What is the purpose of the mic hole in a car navigation system?

The English full name of the mic hole on a car navigation system is 'microphone,' which means it is essentially a microphone. Therefore, the mic hole is responsible for collecting sound for the car navigation system. Many voice-controlled navigation systems often include this feature, and currently, many vehicles integrate the navigation system with the car itself. More details about the navigation mic are as follows: 1. Introduction one: Modern navigation systems can be voice-controlled. To enable voice control, there must be a device capable of successfully receiving sound signals, converting them into electrical signals, and then transmitting these signals to the navigation system's internal computer to recognize relevant information. 2. Introduction two: Currently, the information used by car navigation systems is still quite rudimentary. Therefore, depending on the actual situation, the car navigation system must have such a microphone hole. When using the navigation system, drivers must rely on it as an auxiliary tool; otherwise, there may be safety risks while driving.
15
0
Share

What are the impacts of low car coolant temperature?

The impacts of low car coolant temperature are as follows: 1. Increased fuel consumption: Low car coolant temperature can lead to poor gasoline atomization, incomplete combustion, reduced power, increased fuel consumption, and more carbon deposits. 2. Impact on engine performance: The normal operating temperature of a car engine is generally around 90 degrees Celsius. Low coolant temperature can have certain effects on engine performance. Firstly, there is the issue of the clearance between moving parts. When the temperature is low, parts expand less, resulting in excessive clearance and reduced power. The temperature of the engine oil also decreases, increasing its viscosity, which raises the engine's operating resistance and affects power output.
14
3
Share

What to Do If a Motorcycle Insurance Policy Is Lost? Where Can It Be Checked?

If it is a paper policy, report the loss and apply for a replacement. If it is an electronic policy, you can contact the insurance company to resend a new electronic policy. Below are the relevant instructions: 1. Insurance company official website inquiry: On the official website of the insurance company where you purchased the policy, locate the service center. Relevant policy information can be checked after logging in with your account and password. The account name is usually the username/ID card number/mobile number/email, etc. 2. Avoid claim risks: Generally, there is a health declaration clause for different insurance products. When concluding an insurance contract, the insurer will inquire about the subject matter of insurance or the relevant circumstances of the insured, and the policyholder should provide truthful answers.
11
1
Share

What is the corresponding gasoline octane number for motorcycle compression ratio?

Motorcycle engine compression ratio is 9.5:1, using 97 octane gasoline. Generally, the higher the compression ratio, the higher the required gasoline octane number. Below is relevant information: 1. Compression ratio: The minimum working volume of the cylinder, which is the total volume above the piston when the piston is at top dead center, is called the combustion chamber volume, denoted as Vc; while the total volume above the piston when the piston is at bottom dead center, which is the maximum volume of the cylinder, is called the total cylinder volume, denoted as Va. 2. Gasoline octane number: The high or low value only indicates the size of the gasoline's octane number, and different octane numbers should be selected based on the engine's compression ratio. Mid-range cars with a compression ratio between 8.5-9.5 generally should use 93 octane gasoline; cars with a compression ratio greater than 9.5 should use 97 octane gasoline.
13
1
Share

What to Do When the Car Locks Automatically with the Key Still Inside?

If the car locks automatically with the key still inside and the engine running, it is likely due to a malfunction in the controller. You can either go home to retrieve the spare key or call a locksmith for assistance. Even with a mechanical lock, the car cannot be locked when the engine is running and no one is inside the cabin. After unlocking, it is recommended to replace the smart lock. The pros and cons of automatic locking are as follows: 1. Pros: Anti-theft feature, the car locks quickly after starting, preventing door-pull robberies during traffic jams or at red lights. It also protects children inside the car by preventing them from opening the doors while the car is moving. 2. Cons: In the event of a collision during driving, passengers may not have time to unlock the doors. In severe accidents, passengers might become unconscious, and if the locks remain engaged, rescuers cannot open the doors, which could delay timely rescue. In case of a fire, the consequences could be even more dire.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.