Difference Between BMW M3 and BMW 3 Series?

1 Answers
VonPaul
07/30/25 3:36am
BMW M3 and BMW 3 Series have the following differences: 1. BMW 3 Series is a regular sedan/coupe; BMW M3 belongs to the M series, which is BMW's high-performance sports car line. 3. The BMW 3 Series has a body weight of 1465 kg and dimensions of 4734mm/1811mm/1455mm; the BMW M3 has a body weight of 2080kg and dimensions of 4615mm/1804mm/1424mm. 4. The BMW M3 is equipped with a 3.0-liter six-cylinder twin-turbocharged engine, with a maximum power of 317KW and peak torque of 550N·m; the BMW 3 Series only comes with a 2.0T four-cylinder engine.
Was this review help?
14
0
Share
More Forum Discussions

Are private cars under 10 years old inspected every two years?

Private cars under 10 years old are inspected every two years. According to the new vehicle inspection regulations implemented from November 20, 2020, new vehicles within 6 years can be exempted from inspection twice (inspection labels need to be applied for every two years, but no on-site inspection is required). At the 6th and 8th years, vehicles must undergo on-site inspection. For private cars over 10 years old, the original inspection cycle still applies, i.e., annual inspection for vehicles aged 10 to 15 years, and semi-annual inspection for vehicles over 15 years old. Below is additional information: 1. Relevant regulations: Article 13 of the Road Traffic Safety Law of the People's Republic of China stipulates that motor vehicles registered for road use shall undergo regular safety technical inspections according to laws, administrative regulations, and based on factors such as vehicle purpose, passenger and cargo capacity, and service life. Upon submission of the vehicle's driving license and compulsory third-party liability insurance policy, the motor vehicle safety technical inspection institution shall conduct the inspection, and no additional conditions may be imposed by any unit. 2. Conditions for the six-year exemption from inspection: (1) The vehicle has been involved in a traffic accident causing casualties; (2) The vehicle has been legally penalized for illegal modifications; (3) The vehicle has not been registered within 4 years from the date of manufacture.
11
0
Share

Why Do You Need to Press the Clutch When Braking?

If you brake without pressing the clutch, the wheels are forced to stop rotating, and the resistance is transmitted to the engine through the drivetrain. The engine cannot overcome such a large resistance and will stop working, i.e., stall. Below are the functions of the clutch: 1. Facilitates car starting: Before the car starts, it is stationary. Since the engine and transmission are rigidly connected, once a gear is engaged, the car will suddenly surge forward due to the abrupt connection of power. This not only causes damage to mechanical components but also makes the driving force insufficient to overcome the huge inertia generated by the sudden forward movement, causing the engine speed to drop sharply and stall. 2. Reduces torsional vibration impact: The output torque of a car engine is usually unstable. During the operating stroke, the inertia of the engine's rotating system can reduce torsional vibration, but the remaining impact still adversely affects the subsequent transmission and driveshaft. The damping springs in the clutch can significantly reduce the torsional vibration impact from the engine, extending the lifespan of the transmission gears. 3. Prevents excessive pressure on the drivetrain from causing damage: During emergency braking, the wheels suddenly decelerate sharply, while the drivetrain connected to the engine maintains its original speed due to rotational inertia. This often generates an inertia torque in the drivetrain far greater than the engine torque, making the drivetrain components prone to damage.
9
1
Share

What is the fuel consumption of the Yufeng S16?

Yufeng S16 has a combined fuel consumption of 10L/100km. Related information: 1. Advantages: Fashionable and generous interior configuration, high comfort, elegant appearance, spacious interior, and sufficient power. 2. Engine: The Yufeng S16 is equipped with a 1.9T diesel turbocharged engine, with a maximum power of 150 horsepower, rated power of 110 kilowatts, and peak torque of 350 Nm. 3. Body data: Length 4771mm, width 1870mm, height 1828mm. 4. Vehicle structure: 5-door 7-seat SUV. 5. Maximum speed: 150km/h. 6. Displacement: 1910ml.
1
5
Share

What is the actual fuel consumption of the Lexus LX570?

Lexus LX570 fuel consumption is approximately 17.7L/100KM. The relevant introduction of Lexus LX570 is as follows: 1. Power: The LX570 is equipped with a 5.7L V8 engine, with maximum power reaching 280kw and maximum torque reaching 542Nm. This engine features the world's first motor-driven intelligent variable valve timing control system (VVT-i) and electronically controlled intake cam system (VVT-iE). 2. Suspension: The LX570 uses an independent double-wishbone suspension for the front and a four-link mechanism suspension for the rear. It is equipped with a full-time four-wheel drive system and a Torsen central differential.
17
0
Share

Where is the cabin air filter located in a Jaguar F-PACE?

Jaguar F-PACE's cabin air filter is located inside the glove compartment. Here are the relevant details: 1. Function of cabin air filter: It ensures the filter tightly adheres to the housing, preventing unfiltered air from entering the cabin. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 2. Replacement interval: The vehicle's cabin air filter should generally be replaced every 10,000-15,000 kilometers or annually, typically after the Spring Festival. Since the cabin air filter is used more frequently during winter and summer seasons, this replacement timing helps address pollen dispersion during spring.
1
5
Share

What Does the Three-Year Warranty Cover?

New vehicles come with a three-year comprehensive warranty, which specifically covers the powertrain warranty, including the engine and transmission, drivetrain, chassis, speedometer, and air conditioning components. If these parts experience quality issues, they will be covered under warranty, provided that regular maintenance is performed at an authorized 4S dealership as outlined in the maintenance manual. Below are additional details: 1. Free Replacement of Parts: The comprehensive warranty covers free replacement of various parts if they are confirmed to have quality issues rather than damage caused by human factors, such as the speedometer or air conditioning components. These repairs are free if the issues arise within the warranty period or the specified mileage limit. 2. Engine and Transmission Warranty: The powertrain warranty includes the engine and transmission. If these components develop quality issues, they will be covered under warranty, provided that regular maintenance is performed at an authorized 4S dealership as per the maintenance manual. 3. Warranty Period: Generally, components prone to wear or aging, such as batteries, shock absorbers, wipers, rubber parts, and audio equipment, have shorter warranty periods. In contrast, more durable components like engine blocks have longer warranty periods. Some manufacturers may also declare certain parts, such as tires, as non-warranty items. 4. Comprehensive Vehicle Warranty Period: Different components have different warranty periods, so the so-called comprehensive vehicle warranty period is more accurately described as the warranty period of the component with the longest coverage. Some manufacturers' extended warranties may only apply to a few highly durable components, while uninformed consumers might mistakenly believe it covers the entire vehicle for an extended period.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.