Difference Between 95 and 92 Octane Gasoline

1 Answers
DelLuna
07/25/25 11:04am
Here are the differences between 92 and 95 octane gasoline: 1. N-heptane content: 95 octane gasoline contains 5% n-heptane; 92 octane gasoline contains 8% n-heptane. 2. Isooctane content: The octane rating of 92 octane gasoline is lower than that of 95 octane gasoline. 95 octane gasoline contains 95% isooctane; 92 octane gasoline contains 92% isooctane. 3. Anti-knock performance: Different gasoline grades represent different fuel anti-knock properties. The higher the gasoline grade, the better the anti-knock performance. 95 octane gasoline has better anti-knock performance than 92 octane gasoline.
Was this review help?
7
3
Share
More Forum Discussions

Which model is the mid-range Corolla?

Carolla's mid-range model is the 1.2T S-CVT GL-i Luxury Edition. Here are some details about the Corolla: 1. Introduction: The Corolla (formerly known as 'Corolla' in Chinese) is a Toyota brand. It comes equipped with Michelin 215/45 R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, and reinforced clutches. 2. Space: The Corolla has been lengthened in body size, with its wheelbase reaching 2700mm after the extension.
6
0
Share

Which Year's Cars Meet the China IV Emission Standard?

Cars produced after July 1, 2011, comply with the China IV standard. Relevant information is as follows: 1. Emission Standards: The China V emission standard was implemented on July 1, 2017, so cars meeting the China IV standard were manufactured between 2011 and 2017. The latest emission standard is China VI, which was implemented on July 1, 2019. 2. Trend: As global environmental pollution issues become increasingly severe, countries worldwide are introducing stricter emission standards, which is beneficial for protecting the Earth's environment.
16
5
Share

What happens if you release the clutch too quickly when shifting gears?

Releasing the clutch too quickly when shifting gears will cause the car to stall. Here are some tips on clutch usage: 1. When shifting from a lower gear to a higher gear: In this case, you don't need to release the clutch slowly, but remember to shift only when the speed reaches the appropriate shifting point. At this time, releasing the clutch during upshifting won't affect the car, and since the speed has already increased, the car won't stall. 2. When shifting from a higher gear to a lower gear: You should release the clutch slowly when downshifting. If you release the clutch too quickly, you will feel a noticeable jerk. Therefore, after shifting, slowly release the clutch to give the car a transition period.
9
5
Share

What does Hill Descent Control (HDC) mean in cars?

Hill Descent Control (HDC), also known as the slope control system, enables drivers to smoothly navigate steep downhill slopes without the need to press the brake pedal, maintaining full control. The system automatically controls the braking of each wheel as needed, allowing the vehicle to move forward slightly faster than walking speed, while the driver can focus entirely on steering. The principle of HDC is to combine engine braking with the ABS anti-lock braking system to maintain a "low speed without losing tire traction" when descending steep slopes. HDC must be engaged when the transmission is in 1st gear or reverse gear (as there are two types of steep descents: forward and reverse), and the system typically sets a speed limit to allow the driver to control the vehicle with ease.
3
1
Share

What is the reason for the car dashboard not displaying the gear position?

The reasons why the car dashboard does not display the gear position are as follows: 1. Safety concerns: Since manual transmission operation is complex, if the driver shifts gears while observing the gear position, it will divide their attention and increase the likelihood of accidents. 2. Limited value: For manual transmission cars, shifting gears is the most critical operation, and drivers typically have a fixed shifting pattern in mind. Through years of accumulated experience, they can accurately confirm the gear position. Information regarding automatic transmission cars is as follows: 1. Automatic transmission cars: These do not require gear shifting while driving, whereas manual transmission cars need to change gears appropriately to alter vehicle speed and engine torque. 2. Gear positions: Common automatic transmission vehicles have several gear positions, including P, R, N, D, 3, 2, and 1.
13
0
Share

How to Maintain a Car in Daily Use?

Daily car maintenance methods: 1. Do not slam on the brakes suddenly; instead, apply them gradually to allow the vehicle sufficient buffer time; 2. Change tires frequently, as failing to do so can create safety hazards and place significant strain on the car's engine, potentially leading to accidents in severe cases; 3. Avoid overloading, as excessive weight places considerable burden on the vehicle itself, causing damage to the engine, chassis, braking system, and other components. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance primarily includes the upkeep of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.