Difference Between 91V and 94V Tires?

2 Answers
April
07/29/25 12:48am
The differences between 91V and 94V tires are as follows: 1. Different maximum load capacity: The maximum load capacity of a 91V tire is 615kg, while that of a 94V tire is 670kg. Vehicle owners must not exceed the load limit. The speed rating is indicated by letters ranging from J to Z, where each letter represents the maximum permissible speed of the tire under a specific load index. V indicates that the tire's maximum speed is 240 km/h. 2. Different natural impact resistance: The 94V tire has better natural impact resistance and overall performance compared to the 91V.
Was this review help?
8
2
Share
DiAngelina
08/12/25 4:59am
I always thought the main difference between 91V and 94V tires lies in the numerical part. 91 means each tire can carry a maximum load of 615 kg, while 94 corresponds to 670 kg, equivalent to the weight of an extra medium-sized suitcase. The speed rating V is the same for both, indicating a maximum speed of 240 km/h, suitable for various high-speed driving conditions. If you drive a large SUV or frequently travel fully loaded, 94V tires will provide better support to avoid overloading and unexpected blowouts. On the other hand, 91V tires are more than sufficient for small cars or light-load driving. When choosing tires, don't just focus on the speed rating; matching the total weight of your vehicle is crucial for safety. I once chose the wrong model to save money and ended up with a flat tire halfway, nearly causing an accident. Now I always carefully check the vehicle manual and remind others to do the same.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

Which country does the Mustang belong to?

The Mustang belongs to the United States. More information about the Mustang is as follows: 1. The Mustang is a muscle car under Ford, and it is also one of the three major American muscle cars. The three major American muscle cars are the Camaro, Mustang, and Challenger. 2. The Mustang is equipped with a 2.3-liter turbocharged four-cylinder engine, which is the same engine used in the Ford Focus RS. The Mustang's 2.3-liter turbocharged four-cylinder engine delivers 299 horsepower and a maximum torque of 434 Nm. The engine's maximum torque is achieved at 3000 rpm, and its maximum power is achieved at 5400 rpm. It also features direct fuel injection technology, an aluminum cylinder head and block, and is paired with a 10-speed automatic transmission. 3. The Mustang uses a MacPherson independent front suspension and a multi-link independent rear suspension. The multi-link independent suspension improves the tire's contact with the road, enhancing grip, which in turn improves the car's handling and comfort.
19
4
Share

How to Switch Between Trip A and B on Nissan X-Trail?

The method to switch between Trip A and B on Nissan X-Trail is: toggle between the odometer display and the instrument display computer. Press the instrument panel once to switch to Trip A, and press it twice to switch to Trip B. Taking the 2021 X-Trail model as an example, it is a 5-door, 5-seat compact SUV with body dimensions of: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, luggage compartment volume of 700L, and curb weight of 1489kg. The 2021 X-Trail is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 151PS and a maximum power of 111kW.
3
4
Share

Where is the carbon canister located in a car?

The carbon canister is located between the fuel tank and the engine in a car. It utilizes the adsorption capacity of internal activated charcoal to absorb and store fuel vapors from the fuel tank. The carbon canister is part of the evaporative emission control system, introduced to prevent fuel vapors from entering the atmosphere after the engine stops running. The working principle of the carbon canister is: 1. After the engine is turned off, fuel vapors mix with fresh air inside the canister and are stored in the activated carbon canister; 2. When the engine is started, the solenoid valve installed between the activated carbon canister and the intake manifold opens, allowing the fuel vapors in the activated carbon canister to be drawn into the cylinder by the vacuum in the intake pipe, where they mix with clean air and participate in combustion.
10
2
Share

What does the hold button in a car mean?

The hold button in a car is an intelligent electronic handbrake, which belongs to the braking system function. It automatically engages the handbrake to ensure safety after the vehicle stops, and lightly pressing the accelerator will automatically release the handbrake effect. The functions of the hold button are: 1. The vehicle will not roll away; 2. It is suitable for uphill and downhill slopes or frequent starting and stopping. The working principle of the intelligent electronic handbrake is: the controller provides accurate parking force through the slope sensor. When starting, the parking control unit calculates the information provided by the clutch distance sensor, clutch engagement speed sensor, and accelerator pedal sensor. When the driving force is greater than the driving resistance, the parking brake is automatically released, allowing the car to start smoothly.
17
1
Share

Is Windshield Washer Fluid Necessary?

Windshield washer fluid is necessary, and its functions are: 1. It has the functions of wetting, penetrating, solubilizing, and cleaning to remove dirt; 2. It can lower the freezing point of the liquid, providing an antifreeze effect. The method for adding windshield washer fluid: 1. Pull the hood release lever to open the front hood; 2. Open the washer fluid reservoir cap; 3. While filling, observe the dipstick inside the reservoir and fill up to the marked line. Windshield washer fluid can be categorized by form into: 1. Solid windshield washer fluid; 2. Liquid windshield washer fluid. Windshield washer fluid is the abbreviated term for automotive windshield cleaning fluid, and its main components are: water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants.
4
3
Share

What is the reason for the bulge at the rear of Volkswagen cars?

The reasons for the bulge at the rear of Volkswagen cars are: 1. To reduce the chassis height and improve the overall driving stability; 2. To store automotive components. Taking the Volkswagen Touareg 2.0 as an example, it is a mid-to-large 5-door, 5-seat SUV with body dimensions of: length 4878 mm, width 1984 mm, height 1717 mm, and a wheelbase of 2899 mm. The Volkswagen Touareg 2.0 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW and a maximum torque of 370 N·m. Its drive system is front-engine four-wheel drive, and both the front and rear suspensions use multi-link independent suspension.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.