Detailed Explanation of the Three Modes of Roewe ei6

3 Answers
Emman
07/29/25 4:24am
Roewe ei6 features four hybrid electric drive modes, namely pure electric drive, parallel drive, on-the-go charging, and energy recovery. Below is an introduction to the Roewe ei6: Appearance: The Roewe ei6 is based on the Roewe i6 but adopts a larger trapezoidal front grille, a redesigned front bumper, and exclusive hybrid badges on the front fenders. The top-tier model of the Roewe ei6 boasts a rich array of features, including Alcantara seats, dual-zone automatic climate control, heated front seats, an electronic parking brake, a 12-inch full LCD instrument panel, ambient lighting, and an auto-dimming rearview mirror. Configuration: The new Roewe ei6 offers multiple customization options, including wheel styles, exterior mirrors, headlights, a sunroof, exterior door handles, front and rear bumpers, a two-tone body, and a black roof.
Was this review help?
6
5
Share
NoahFitz
08/12/25 8:08am
Here's my understanding of the three modes of the Roewe ei6: In pure electric mode, the car runs entirely on battery power. After starting, the vehicle is exceptionally quiet with zero emissions, making it most suitable for urban commuting or short trips, with low power consumption and cost savings. The hybrid mode intelligently switches between the engine and motor during driving, such as automatically engaging additional power during uphill climbs or highway driving, ensuring a balance between range and fuel efficiency, with very low overall fuel consumption. The maintenance mode can lock the current battery level without further power depletion, ideal for preserving battery power during long-distance travel for subsequent urban use. I find the flexible switching between different modes very practical – using pure electric for daily commutes, hybrid for road trips, and maintenance mode to avoid battery depletion. Battery health is crucial, so regular maintenance is recommended for long-term cost savings, peace of mind, and stable driving performance.
Was this review help?
15
3
Share
Expand All
ElijahFitz
08/12/25 8:08am
When driving the Roewe ei6, I frequently use three modes: Pure Electric Mode allows the car to run entirely on battery power, ideal for city traffic jams or short trips—quiet, fuel-saving, and zero emissions. Hybrid Mode automatically combines gasoline and electric power, such as activating the engine to supplement power in mixed driving conditions, offering strong range and low fuel consumption. Maintenance Mode can keep the current battery level from dropping, useful for reserving power during long highway trips, allowing for a pure electric drive upon arriving home. As a family user, safety comes first. Using pure electric mode for commuting saves money and is eco-friendly, while switching to hybrid mode on weekend outings is more reliable. Mode operation is simple, with buttons on the steering wheel for quick switching. Avoiding sudden acceleration in daily use helps extend battery life, lowering overall vehicle costs and making family trips more reassuring.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

Reasons for Vehicle Body Crossing the Line in Parallel Parking?

The main reason for the vehicle body crossing the line in parallel parking during Subject 2 of the driving test may be turning the steering wheel too late. Below is a brief introduction to Subject 2: 1. Basic Information: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items for small cars C1 and C2 include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. 2. Test Content: The test items for large vehicles A1, A2, A3, B1, and B2 include stake test, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, driving on a curved path, turning at a right angle, passing through a width-restricted gate, navigating continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulated scenarios such as highways, continuous sharp turns on mountain roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling.
6
0
Share

What does 30cm refer to the distance from the corner of the garage?

30cm refers to the distance from the corner of the garage to the body of the car. Here are the specific techniques for finding the 30cm distance: 1. Observe the position of the engine hood: After hearing the voice prompt, you need to drive forward and to the right. When you see the right front corner of the engine hood at the 1/3 position align with the roadside line, the distance between the car body and the roadside line is exactly 30cm. 2. Look at the raised part of the wiper: From the driver's seat, when the raised part of the wiper aligns with the right side line, the distance is approximately 30cm. 3. Look at the right front door handle: Observe the right front door handle in the right rearview mirror. If the right front door handle is tangent to the right side line, the distance is 30cm; if it is too far, you need to make slight adjustments to the direction; if it is too close, there is a risk of pressing the line.
2
0
Share

Why is Subject 3 Divided into Two Tests?

Subject 3 consists of a road test and a written test on safety knowledge, hence requiring two separate examinations. Below are the specific details about Subject 3: 1. Introduction: Subject 3 is part of the motor vehicle driver's license assessment, officially known as the Road Driving Skills and Safety & Civilized Driving Knowledge Test. 2. Content: The road driving skills test typically includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, proceeding straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, night driving, etc. The test content varies depending on the type of vehicle license. 3. Test Content: The safety and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, as well as post-accident handling knowledge, etc.
14
4
Share

Can You Cross the Dotted Line When Parallel Parking?

When performing parallel parking, the vehicle must not cross the dotted line outside the parking space. Here is some relevant information: 1. Previous parallel parking method: Four poles were placed on the ground to symbolize the four corners of the parking space. One of the criteria for successful parking was whether the vehicle touched these four poles. After the implementation of the new traffic regulations, parallel parking no longer uses poles; instead, ground markings are used to define the parking space boundaries. 2. For learners obtaining a C1 driver's license: The length of the parallel parking space is equal to the length of the vehicle. The vehicle must be driven to a position parallel to the parking space, then reversed into the space without any pauses. As long as the vehicle is parked within this range without crossing the boundary lines, it is considered a pass.
5
2
Share

What are the differences between BYD Song and Song Pro?

The differences between BYD Song and Song Pro are: 1. Different dimensions: The length, width, and height of BYD Song are 4600mm, 1830mm, and 1700mm respectively, with a wheelbase of 2660mm; while Song Pro measures 4650mm in length, 1860mm in width, and 1700mm in height, with a wheelbase of 2712mm. 2. Different configurations: BYD Song is equipped with hill start assist; whereas Song Pro features cruise control, rear radar, and reversing camera. Song Pro has a maximum horsepower of 160hp, comes with a 6-speed manual transmission, a fuel tank capacity of 63L, and a maximum torque of 245Nm.
2
5
Share

Is 20 mph in 3rd gear considered lugging?

20 mph in 3rd gear is not considered lugging. Lugging is divided into high-speed low-gear and low-speed high-gear situations. The standard gear shifting speed for vehicles is to use 3rd gear at speeds between 20-40 km/h, which is commonly used for urban driving; the normal gear for 50 mph should be 4th gear, while 50 mph in 3rd gear would be considered high-speed low-gear lugging. Below is a detailed introduction to the standard gear shifting speeds for vehicles: 1. 1st gear: Used for normal starts or when climbing very steep slopes. The speed in this gear is around 10 km/h. 2. 2nd gear: Used as a transition gear for acceleration after starting, or for low-speed driving or climbing steep slopes, with speeds around 20 km/h. 3. 3rd gear: Used at speeds between 20-40 km/h, commonly used for urban driving. 4. 4th gear: Used at speeds between 40-60 km/h. 5. 5th gear: Can be used at speeds of 60 km/h or above.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.